Attachment 156647 Details for Bug 242561 – bootlog showing the error (no extra kernel options)

bootlog showing the error (no extra kernel options)

minicom.cap (text/plain), 19.27 KB, created by Sven Neuhaus on 2007-06-09 14:09:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sven Neuhaus

Created: 2007-06-09 14:09:05 UTC

Size: 19.27 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fde0000 end: 000000007fee0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fee0000 size: 0000000000003000 end: 000000007fee3000 type: 4
>copy_e820_map() start: 000000007fee3000 size: 000000000000d000 end: 000000007fef0000 type: 3
>copy_e820_map() start: 000000007fef0000 size: 0000000000010000 end: 000000007ff00000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5220
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524000
>early_node_map[1] active PFN ranges
>    0:        0 ->   524000
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F91F0, 0014 (r0 IntelR)
>ACPI: RSDT 7FEE3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3180, 4BB6 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: HPET 7FEE7E80, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD       98)
>ACPI: MCFG 7FEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEE7D80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: SSDT 7FEE7F80, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20060912)
>ACPI: SSDT 7FEE8410, 02F1 (r1  PmRef    CpuPm     3000 INTL 20040311)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>Built 1 zonelists.  Total pages: 519907
>Kernel command line: ro root=LABEL=/ console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2396.057 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070444k/2096000k available (2066k kernel code, 24400k reserved, 1092k data, 240k init, 1178496k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 4794.47 BogoMIPS (lpj=2397236)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c077d000 soft=c075d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4791.81 BogoMIPS (lpj=2395908)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Total of 2 processors activated (9586.28 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=29
>Time: 15:44:13  Date: 05/09/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfb430, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it hel post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0f: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0xfed00000-0xfed000ff could not be reserved
>pnp: 00:0f: iomem range 0x7fee0000-0x7fefffff could not be reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: b000-bfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 2852k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1181403852.339:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: SSDT 7FEE8380, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20060912)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (52 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:948:739
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>Red Hat nash version 6.0.9 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fe00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000fd00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> G18 (level, low) -> IRQ 20
>uhci_h0000:00:1d.2: UHCI Host ntroller
>uhci_hcd 0000:00:1d.2: new USB bus registered, aed bus number 5
>uhci_hcd 0000:00:1d.2: irq 20, iobase 0x0000fb00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdfff000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>irq 19: nobody cared (try booting with the "irqpoll" option)
> [<c0452ada>] __report_bad_irq+0x36/0x75
> [<c0452cb8>] note_interrupt+0x19f/0x1db
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfdffe000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
> [<c0566b07>] usb_hcd_irq+0x21/0x4e
> [<c04521aa>] handle_IRQ_event+0x1a/0x3f
> [<c045344d>] handle_fasteoi_irq+0x86/0xa6
> [<c04533c7>] handle_fasteoi_irq+0x0/0xa6
> [<c04072bb>] do_IRQ+0xac/0xd1
> [<c04058ff>] common_interrupt+0x23/0x28
> [<c04058ff>] common_interrupt+0x23/0x28
> [<c0403281>] mwait_idle_with_hints+0x3b/0x3f
> [<c04033d6>] cpu_idle+0xa3/0xc4
> [<c071bb5f>] start_kernel+0x435/0x43d
> [<c071b25a>] unknown_bootoption+0x0/0x202
> =======================
>handlers:
>[<c0566ae6>] (usb_hcd_irq+0x0/0x4e)
>Disabling IRQ #19
>Loading mbcache.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ata1: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 19
>ata2: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 19
>scsi0 : ata_piix
>usb 7-6: new high speed USB device using ehci_hcd and address 3
>usb 7-6: configuration #1 chosen from 1 choice
>hub 7-6:1.0: USB hub found
>hub 7-6:1.0: 2 ports detected
>usb 4-1: new full speed USB device using uhci_hcd and address 3
>usb 4-1: configuration #1 chosen from 1 choice
>usb 7-6.1: new high speed USB device using ehci_hcd and address 4
>usb 7-6.1: configuration #1 chosen from 1 choice
>hub 7-6.1:1.0: USB hub found
>hub 7-6.1:1.0: 4 ports detected
>usb 7-6.2: new high speed USB device using ehci_hcd and address 5
>usb 7-6.2: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 7-6.1.2: new full speed USB device using ehci_hcd and address 6
>usb 7-6.1.2: configuration #1 chosen from 1 choice
>ata1.00: qc timeout (cmd 0x27)
>ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata1.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: failed to set xfermode (err_mask=0x40)
>ata1: failed to recover some devices, retrying in 5 secs
>ata1.00: qc timeout (cmd 0x27)
>ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata1.00: failed to set xfermode (err_mask=0x40)
>ata1.00: limiting speed to UDMA/133:PIO3
>ata1: failed to recover some devices, retrying in 5 secs
>ata1.00: qc timeout (cmd 0x27)
>ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata1.00: failed to set xfermode (err_mask=0x40)
>ata1.00: disabled
>scsi1 : ata_piix
>ata2.00: qc timeout (cmd 0x27)
>ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata2.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
>ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: qc timeout (cmd 0x27)
>ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2.00: limiting speed to UDMA/133:PIO3
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: qc timeout (cmd 0x27)
>ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 0
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2.00: disabled
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>ata3: SATA max UDMA/133 cmd 0x0001f300 ctl 0x0001f202 bmdma 0x0001ef00 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ef08 irq 19
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0x0001f307
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x0001f107
>Waiting for driver initialization.
>Loading ata_generic.ko module
>Loading usb-storage.ko module
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>Waiting for driver initialization.
>scsi 4:0:0:0: Direct-Access     SMSC     223 U HS-CF      3.60 PQ: 0 ANSI: 0
>scsi 4:0:0:1: Direct-Access     SMSC     223 U HS-MS      3.60 PQ: 0 ANSI: 0
>scsi 4:0:0:2: Direct-Access     SMSC     223 U HS-SM      3.60 PQ: 0 ANSI: 0
>scsi 4:0:0:3: Direct-Access     SMSC     223 U HS-SD/MMC  3.60 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi removable disk sda
>sd 4:0:0:1: Attached scsi removable disk sdb
>sd 4:0:0:2: Attached scsi removable disk sdc
>sd 4:0:0:3: Attached scsi removable disk sdd
>Loading ahci.ko module
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xf8860100 ctl 0x00000000 bmdma 0x00000000 irq 16
>ata6: SATA max UDMA/133 cmd 0xf8860180 ctl 0x00000000 bmdma 0x00000000 irq 16
>scsi5 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi6 : ahci
>ata6: SATA link down (SStatus 0 SControl 300)
>Waiting for driver initialization.
>Trying to resume from LABEL=SWAP-hda31
>Unable to access resume device (LABEL=SWAP-hda31)
>Creating root device.
>Mounting root filesystem.
>mount: could notKernel panic - not syncing: Attempted to kill init!

Actions: View

Attachments on bug 242561: 156647 | 156648