Attachment 156757 Details for Bug 243167 – The lspci -vv output file from the system with Fedora Installed

The lspci -vv output file from the system with Fedora Installed

lspci_output (text/plain), 21.66 KB, created by Brett Havekost on 2007-06-11 20:22:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brett Havekost

Created: 2007-06-11 20:22:13 UTC

Size: 21.66 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 5000V Chipset Memory Controller Hub (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 0
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: d9000000-da0fffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
>	Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 4: I/O ports at 1800 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 4: I/O ports at 1820 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 19
>	Region 4: I/O ports at 1840 [size=32]
>
>00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 16
>	Region 4: I/O ports at 1860 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at db200000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
>	Memory behind bridge: da100000-daffffff
>	Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 31fe
>
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1880 [size=16]
>
>00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA AHCI Controller (rev 09) (prog-if 01 [AHCI 1.0])
>	Subsystem: Hewlett-Packard Company Unknown device 31fe
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 0: I/O ports at 18b8 [size=8]
>	Region 1: I/O ports at 18ac [size=4]
>	Region 2: I/O ports at 18b0 [size=8]
>	Region 3: I/O ports at 18a8 [size=4]
>	Region 4: I/O ports at 18c0 [size=32]
>	Region 5: Memory at db200400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] #12 [0010]
>
>01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=01, secondary=02, subordinate=03, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Upstream Port IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: SlotPowerLimit 0.000000
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
>
>01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=01, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: d9000000-da0fffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
>	Capabilities: [d8] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>		Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>
>02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Downstream Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 2, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Hewlett-Packard Company Unknown device 31fd
>
>04:00.0 VGA compatible controller: nVidia Corporation NV18GL [Quadro NVS 50 PCI] (rev c1) (prog-if 00 [VGA])
>	Subsystem: nVidia Corporation Unknown device 02b4
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 40 (1250ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 7
>	Region 0: Memory at d9000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>	[virtual] Expansion ROM at da020000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>04:02.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 01)
>	Subsystem: Hewlett-Packard Company Unknown device 3228
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: I/O ports at 2000 [disabled] [size=256]
>	Region 1: Memory at da010000 (64-bit, non-prefetchable) [size=16K]
>	Region 3: Memory at da000000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [68] PCI-X non-bridge device
>		Command: DPERE- ERO- RBC=512 OST=16
>		Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=16 DMCRS=128 RSCEM- 266MHz- 533MHz-
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>		Vector table: BAR=1 offset=00002000
>		PBA: BAR=1 offset=00003000
>
>07:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
>	Subsystem: Compaq Computer Corporation NC7781 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (16000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at da100000 (64-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at da120000 [disabled] [size=64K]
>	Capabilities: [40] PCI-X non-bridge device
>		Command: DPERE- ERO- RBC=512 OST=1
>		Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
>		Address: c9a923982f40e084  Data: 3118
>
>07:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA])
>	Subsystem: Hewlett-Packard Company Unknown device 31fa
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 128 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled] [size=16M]
>	Region 1: Memory at da110000 (32-bit, non-prefetchable) [disabled] [size=16K]
>	Region 2: Memory at da800000 (32-bit, non-prefetchable) [disabled] [size=8M]
>	[virtual] Expansion ROM at da130000 [disabled] [size=64K]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 243167: 156755 | 156756 | 156757 | 156758