Attachment 156767 Details for Bug 243803 – Output of lspci -vv

Output of lspci -vv

lspci.txt (text/plain), 6.27 KB, created by Bojan Smojver on 2007-06-11 23:22:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bojan Smojver

Created: 2007-06-11 23:22:42 UTC

Size: 6.27 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
>	Subsystem: Intel Corporation D815EEA2 mainboard
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Capabilities: [88] Vendor Specific Information
>
>00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02) (prog-if 00 [VGA])
>	Subsystem: Intel Corporation D815EEA2 Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>	Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 11) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: ff000000-ff8fffff
>	Prefetchable memory behind bridge: f6a00000-f6afffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 11)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 11) (prog-if 80 [Master])
>	Subsystem: Intel Corporation D815EEA2 mainboard
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at ffa0 [size=16]
>
>00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 11) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation D815EEA2 mainboard
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 12
>	Region 4: I/O ports at ef40 [size=32]
>
>00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 11)
>	Subsystem: Intel Corporation D815EEA2 mainboard
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at efa0 [size=16]
>
>00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 11) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation D815EEA2 mainboard
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 9
>	Region 4: I/O ports at ef80 [size=32]
>
>01:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
>	Subsystem: Intel Corporation EtherExpress PRO/100 VE
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at df00 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>01:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 14000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at f6afe000 (32-bit, prefetchable) [size=4K]
>	Region 1: I/O ports at df40 [size=32]
>	Region 2: Memory at ff500000 (32-bit, non-prefetchable) [size=1M]
>	Expansion ROM at ff000000 [disabled] [size=1M]
>
>01:0a.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 14000ns max)
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at f6aff000 (32-bit, prefetchable) [size=4K]
>	Region 1: I/O ports at df80 [size=32]
>	Region 2: Memory at ff700000 (32-bit, non-prefetchable) [size=1M]
>	Expansion ROM at ff100000 [disabled] [size=1M]
>
>01:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 9
>	Region 0: I/O ports at d800 [disabled] [size=256]
>	Region 1: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
>	Expansion ROM at f6a00000 [disabled] [size=64K]
>

Actions: View

Attachments on bug 243803: 156767