Attachment 157394 Details for Bug 235902 – dmesg from booting 3228 kernel

dmesg from booting 3228 kernel

dmesg3.txt (text/plain), 22.49 KB, created by Richard Hally on 2007-06-19 16:41:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Hally

Created: 2007-06-19 16:41:42 UTC

Size: 22.49 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc8 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070615 (Red Hat 4.1.2-13)) #1 SMP Mon Jun 18 17:57:20 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
> BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
> BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>479MB LOWMEM available.
>found SMP MP-table at 000f6330
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122864) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122864
>  HighMem    122864 ->   122864
>early_node_map[1] active PFN ranges
>    0:        0 ->   122864
>On node 0 totalpages: 122864
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 1507 pages used for memmap
>  Normal zone: 117261 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7D50, 0014 (r0 AWARD )
>ACPI: RSDT 1DFF3000, 002C (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 1DFF3040, 0074 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 1DFF30C0, 34B8 (r1 AWARD  AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 1DFF0000, 0040
>ACPI: APIC 1DFF6580, 0068 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
>Built 1 zonelists.  Total pages: 121305
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b1000 soft=c0791000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2800.269 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 992 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 474068k/491456k available (2188k kernel code, 16816k reserved, 1162k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddff0000   ( 479 MB)
>      .init : 0xc074b000 - 0xc078c000   ( 260 kB)
>      .data : 0xc06231d1 - 0xc0745a24   (1162 kB)
>      .text : 0xc0400000 - 0xc06231d1   (2188 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5603.67 BogoMIPS (lpj=2801839)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000041d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07b2000 soft=c0792000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5599.45 BogoMIPS (lpj=2799728)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000041d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Total of 2 processors activated (11203.13 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2880 bytes
>Time: 11:57:20  Date: 05/19/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb9a0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Enabling SiS 96x SMBus.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: ed000000-ed0fffff
>  PREFETCH window: e0000000-e7ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 589824 bytes)
>TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3565k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1182254239.327:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 7F397089B8DEFAED
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (50 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected SiS chipset - id:1633
>agpgart: AGP aperture is 64M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:36:985
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 882k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 16, io mem 0xed103000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 17, io mem 0xed100000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
>PCI: cache line size of 128 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 18, io mem 0xed101000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_sis 0000:00:02.5: version 0.5.1
>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 19
>scsi0 : pata_sis
>scsi1 : pata_sis
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>ata2.01: ATAPI: SAMSUNG CD-R/RW SW-252S, R952, max UDMA/33
>usb 1-2: configuration #1 chosen from 1 choice
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JB-00ET 77.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>hiddev96: USB HID v1.10 Device [APC Back-UPS ES 725 FW:802.n2.D USB FW:n2] on usb-0000:00:03.0-2
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: BUG: prereset() requested invalid reset type
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: BUG: prereset() requested invalid reset type
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: BUG: prereset() requested invalid reset type
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: limiting speed to UDMA/25:PIO4
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: BUG: prereset() requested invalid reset type
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1182254308.817:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
>security:  60 classes, 65638 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1182254309.317:3): policy loaded auid=4294967295
>audit(1182254310.817:4): avc:  denied  { read write } for  pid=494 comm="restorecon" name="console" dev=tmpfs ino=1083 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=chr_file
>audit(1182254310.817:5): avc:  denied  { read write } for  pid=494 comm="restorecon" name="console" dev=tmpfs ino=1083 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=chr_file
>audit(1182254310.817:6): avc:  denied  { read write } for  pid=494 comm="restorecon" name="console" dev=tmpfs ino=1083 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=chr_file
>audit(1182254310.817:7): avc:  denied  { write } for  pid=494 comm="restorecon" name="null" dev=tmpfs ino=1079 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=chr_file
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:00:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:06.0: Try the "8139too" driver instead.
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xde8ce000, 00:c0:49:dc:8e:66, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21
>intel8x0_measure_ac97_clock: measured 50524 usecs
>intel8x0: clocking to 48000
>loop: module loaded
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>audit(1182268727.512:8): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb0" dev=tmpfs ino=5292 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:9): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb1" dev=tmpfs ino=5293 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:10): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb2" dev=tmpfs ino=5294 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:11): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb3" dev=tmpfs ino=5295 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:12): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb4" dev=tmpfs ino=5296 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:13): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb5" dev=tmpfs ino=5297 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:14): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb6" dev=tmpfs ino=5298 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>audit(1182268727.512:15): avc:  denied  { getattr } for  pid=1327 comm="pam_console_app" name="fb7" dev=tmpfs ino=5299 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>Adding 983032k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:983032k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3839 buckets, 30712 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1182268733.012:16): avc:  denied  { getattr } for  pid=1729 comm="dhclient-script" name="setfiles" dev=dm-0 ino=3241024 scontext=system_u:system_r:dhcpc_t:s0 tcontext=system_u:object_r:setfiles_exec_t:s0 tclass=file
>audit(1182268733.512:17): audit_pid=1849 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>application nasd uses obsolete OSS audio interface

Actions: View

Attachments on bug 235902: 152487 | 152852 | 152853 | 152966 | 152967 | 152968 | 152969 | 152986 | 153056 | 153057 | 154592 | 154608 | 155980 | 157394