Attachment 157504 Details for Bug 245084 – lspci + dmesg

lspci + dmesg

dmesg_bcm43xx_061707_2 (text/plain), 26.68 KB, created by Tim Kitsos on 2007-06-20 22:33:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tim Kitsos

Created: 2007-06-20 22:33:29 UTC

Size: 26.68 KB

patch

obsolete

>[tim@localhost ~]$ su -
>Password: 
>su: incorrect password
>[tim@localhost ~]$ su -
>Password: 
>[root@localhost ~]# wget http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2
>--22:41:38--  http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2
>           => `broadcom-wl-4.80.53.0.tar.bz2'
>Resolving downloads.openwrt.org... 195.56.146.238
>Connecting to downloads.openwrt.org|195.56.146.238|:80... connected.
>HTTP request sent, awaiting response... 200 OK
>Length: 904,072 (883K) [application/x-tar]
>
>100%[====================================>] 904,072      156.03K/s    ETA 00:00
>
>22:41:45 (142.00 KB/s) - `broadcom-wl-4.80.53.0.tar.bz2' saved [904072/904072]
>
>[root@localhost ~]# tar -xjvf broadcom-wl-4.80.53.0.tar.bz2
>broadcom-wl-4.80.53.0/
>broadcom-wl-4.80.53.0/kmod/
>broadcom-wl-4.80.53.0/kmod/wl_apsta_mimo.o
>broadcom-wl-4.80.53.0/kmod/wl_apsta.o
>broadcom-wl-4.80.53.0/nas
>broadcom-wl-4.80.53.0/wl
>broadcom-wl-4.80.53.0/WHERE_FROM
>broadcom-wl-4.80.53.0/libbcmcrypto.so
>[root@localhost ~]# bcm43xx-fwcutter -w /lib/firmware/ broadcom-wl-4.80.53.0/kmod/wl_apsta.o
>*** WARNING ***
>This file contains new version4 
>firmware. v4 firmware is _not_ supported by 
>the driver in mainline kernels. For v4 firmware 
>you need latest bcm43xx development version 
>(wireless-dev kernel tree). If you don't know what 
>this warning is about, use a 3.xx.xx.xx driver version 
>instead to extract the firmware.
>
>  filename   :  wl_apsta.o
>  version    :  4.80.53.0
>  MD5        :  9207bc565c2fc9fa1591f6c7911d3fc0
>  microcodes :  4 5 11 13 
>  pcms       :  4 5 
>
>  microcode  :  4
>  revision   :  0x015f
>  patchlevel :  0x007e
>  date       :  2006-07-29
>  time       :  05:54:02
>
>  microcode  :  5
>  revision   :  0x015f
>  patchlevel :  0x007e
>  date       :  2006-07-29
>  time       :  05:54:02
>
>  microcode  :  11
>  revision   :  0x015f
>  patchlevel :  0x007e
>  date       :  2006-07-29
>  time       :  05:54:02
>
>  microcode  :  13
>  revision   :  0x015f
>  patchlevel :  0x007e
>  date       :  2006-07-29
>  time       :  05:54:02
>
>extracting bcm43xx_microcode4.fw ...
>extracting bcm43xx_microcode5.fw ...
>extracting bcm43xx_microcode11.fw ...
>extracting bcm43xx_microcode13.fw ...
>extracting bcm43xx_pcm4.fw ...
>extracting bcm43xx_pcm5.fw ...
>extracting bcm43xx_initval01.fw ...
>extracting bcm43xx_initval02.fw ...
>extracting bcm43xx_initval03.fw ...
>extracting bcm43xx_initval04.fw ...
>extracting bcm43xx_initval05.fw ...
>extracting bcm43xx_initval06.fw ...
>extracting bcm43xx_initval07.fw ...
>extracting bcm43xx_initval08.fw ...
>extracting bcm43xx_initval09.fw ...
>extracting bcm43xx_initval10.fw ...
>extracting bcm43xx_initval20.fw ...
>extracting bcm43xx_initval21.fw ...
>extracting bcm43xx_initval22.fw ...
>extracting bcm43xx_initval23.fw ...
>extracting bcm43xx_initval24.fw ...
>extracting bcm43xx_initval25.fw ...
>[root@localhost ~]# 
>
>
>
>
>
>[tim@localhost ~]$ /sbin/lspci -n
>00:00.0 0600: 8086:3580 (rev 02)
>00:00.1 0880: 8086:3584 (rev 02)
>00:00.3 0880: 8086:3585 (rev 02)
>00:02.0 0300: 8086:3582 (rev 02)
>00:02.1 0380: 8086:3582 (rev 02)
>00:1d.0 0c03: 8086:24c2 (rev 03)
>00:1d.1 0c03: 8086:24c4 (rev 03)
>00:1d.2 0c03: 8086:24c7 (rev 03)
>00:1d.7 0c03: 8086:24cd (rev 03)
>00:1e.0 0604: 8086:2448 (rev 83)
>00:1f.0 0601: 8086:24cc (rev 03)
>00:1f.1 0101: 8086:24ca (rev 03)
>00:1f.3 0c05: 8086:24c3 (rev 03)
>00:1f.5 0401: 8086:24c5 (rev 03)
>00:1f.6 0703: 8086:24c6 (rev 03)
>02:00.0 0200: 10ec:8139 (rev 10)
>02:05.0 0607: 104c:ac50 (rev 02)
>02:06.0 0280: 14e4:4320 (rev 03)
>[tim@localhost ~]$ 
>
>
>
>
>[tim@localhost ~]$ dmesg bcm43xx
>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 15:37:31 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000ce000 size: 0000000000002000 end: 00000000000d0000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001dde0000 end: 000000001dee0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001dee0000 size: 000000000000c000 end: 000000001deec000 type: 3
>copy_e820_map() start: 000000001deec000 size: 0000000000014000 end: 000000001df00000 type: 4
>copy_e820_map() start: 000000001df00000 size: 0000000002100000 end: 0000000020000000 type: 2
>copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
> BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
> BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
> BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>478MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122592) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122592
>  HighMem    122592 ->   122592
>early_node_map[1] active PFN ranges
>    0:        0 ->   122592
>On node 0 totalpages: 122592
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 925 pages used for memmap
>  Normal zone: 117571 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6560, 0014 (r0 HP    )
>ACPI: RSDT 1DEE67E7, 002C (r1 HP     3084      6040000  LTP        0)
>ACPI: FACP 1DEEBED2, 0074 (r1 HP     3084      6040000 PTL        50)
>ACPI: DSDT 1DEE6C22, 52B0 (r1 HP     3084      6040000 MSFT  100000E)
>ACPI: FACS 1DEFCFC0, 0040
>ACPI: BOOT 1DEEBFD8, 0028 (r1 HP     3084      6040000  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
>Built 1 zonelists.  Total pages: 121635
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (013cb000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1296.835 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 477720k/490368k available (2066k kernel code, 12040k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddee0000   ( 478 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604bc2 - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604bc2   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2594.41 BogoMIPS (lpj=1297206)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c20)
>CPU0: Intel(R) Celeron(R) M processor         1.30GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time: 15:08:04  Date: 05/17/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 7 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
>Time: tsc clocksource has been installed.
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 3, cardbus bridge: 0000:02:05.0
>  IO window: 00003400-000034ff
>  IO window: 00003800-000038ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 38000000-3bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: e0200000-e02fffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3487k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1182092883.117:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 949CEA51B56F22EC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 855 Chipset.
>agpgart: Detected 32636K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:05.0 [103c:3084]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:05.0, mfunc 0x01111112, devctl 0x64
>Time: acpi_pm clocksource has been installed.
>Yenta: ISA IRQ mask 0x04d8, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:930:133
>  hash matches device device:08
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
>ata1.00: ATA-6: ST94019A, 3.09, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATAPI, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      ST94019A         3.09 PQ: 0 ANSI: 5
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4243N 1.07 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1182092891.984:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1817 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 67727 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1182092892.484:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>eth0: RealTek RTL8139 at 0xde9ce000, 00:c0:9f:74:e7:c5, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>intel_rng: FWH not detected
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50043 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
>ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
>ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
>ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI core, index 4
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:06.0
>bcm43xx_mac80211: Broadcom 4306 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Found PHY: Analog 2, Type 2, Revision 2
>bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>bcm43xx_mac80211: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>MC'97 0 converters and GPIO not ready (0x1)
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>ACPI: AC Adapter [ACAD] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 983032k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:983032k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3831 buckets, 30648 max)
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>audit(1182118126.535:4): audit_pid=1804 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>bcm43xx_mac80211: Adding Interface type 2
>ssb: Switching to PCI core, index 4
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned on
>bcm43xx_mac80211: Radio enabled by hardware
>bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=5, tgt=62). Disabling TX power adjustment.
>bcm43xx_mac80211: Chip initialized
>bcm43xx_mac80211: 30-bit DMA initialized
>bcm43xx_mac80211: Wireless interface started
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>eth0: no IPv6 routers present
>security:  3 users, 6 roles, 1816 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 67766 rules
>
>
>
>
>
>
>[tim@localhost ~]$ su -
>Password: 
>[root@localhost ~]# #!/bin/sh
>[root@localhost ~]# 
>[root@localhost ~]# BCM43XX_V3_FW="http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername \
>> 1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fx-ms \
>> download&blobheadervalue2=inline%3B+filename%3DWMP54GSv1.1_20050428.exe&blobkey=id&blo \
>> btable=MungoBlobs&blobwhere=1124848568427&ssbinary=true"
>[root@localhost ~]# 
>[root@localhost ~]# wget $BCM43XX_V3_FW
>--14:52:30--  http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername
>           => `Satellite?blobcol=urldata&blobheadername'
>Resolving www.linksys.com... 66.161.11.90
>Connecting to www.linksys.com|66.161.11.90|:80... connected.
>HTTP request sent, awaiting response... 500 Internal Server Error
>14:52:30 ERROR 500: Internal Server Error.
>
>--14:52:30--  http://1=content-type&blobheadername2=content-disposition&blobheadervalue1=application/x-ms/
>           => `index.html'
>Resolving 1=content-type&blobheadername2=content-disposition&blobheadervalue1=application/x-ms... failed: Name or service not known.
>--14:52:30--  http://download&blobheadervalue2=inline;+filename=wmp54gsv1.1_20050428.exe&blobkey=id&blo/
>           => `index.html'
>Resolving download&blobheadervalue2=inline;+filename=wmp54gsv1.1_20050428.exe&blobkey=id&blo... failed: Name or service not known.
>--14:52:31--  http://btable=mungoblobs&blobwhere=1124848568427&ssbinary=true/
>           => `index.html'
>Resolving btable=mungoblobs&blobwhere=1124848568427&ssbinary=true... failed: Temporary failure in name resolution.
>
>FINISHED --14:52:31--
>Downloaded: 0 bytes in 0 files
>[root@localhost ~]# 
>
>

Actions: View

Attachments on bug 245084: 157504 | 247191 | 274421 | 274441 | 274461 | 291451