Attachment 157514 Details for Bug 244491 – reproduction of original errors

reproduction of original errors

ide-geometry-config-issue (text/plain), 9.28 KB, created by Ian Fennell on 2007-06-21 04:43:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ian Fennell

Created: 2007-06-21 04:43:40 UTC

Size: 9.28 KB

patch

obsolete

>
>generated today
>
>sdc is seagate ide 500 gig that I first saw the error on
>sde is seagate sata 500 gig on same usb bridge
>hal dev manager doesn't seem to permit me to save the hardware info, I could generate screen shots if you want 
>
>
>[ian@localhost ~]$ cat /sys/block/sdc/size
>792223792
>[ian@localhost ~]$ cat /sys/block/sde/size
>976773168
>[ian@localhost ~]$
>
>c is 500 gig ide , cleared first 20 gig with "dd if=/dev/zero od/dev/sdd bs=1M "
>
>when I hot plugged sata drive it locked  keyboard / usb and I lost  the screen copies of deleting drives , gparted log may be good
>
>Password:
>[root@localhost ~]# gparted
>======================
>libparted : 1.8.6
>======================
>Unable to open /dev/sdc - unrecognised disk label.
>Unable to open /dev/sde - unrecognised disk label.
>Unable to open /dev/sdc - unrecognised disk label.
>Unable to open /dev/sde - unrecognised disk label.
>Unable to open /dev/sde - unrecognised disk label.
>Unable to open /dev/sde - unrecognised disk label.
>
>(gparted:17232): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_file: assertion `fil
>ename != NULL' failed
>
>(gparted:17232): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT
>(object)' failed
>Segmentation fault
>
>note above  successfully  initialised  partion tables of sdc and sde 
>Gdk errors are from touching the edit menu with the mouse cursor(seen in evolution too)
>
>
>[root@localhost ~]# gparted
>======================
>libparted : 1.8.6
>======================
>
>(gparted:18032): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_file: assertion `fil
>ename != NULL' failed
>
>(gparted:18032): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT
>(object)' failed
>Segmentation fault
>[root@localhost ~]# gparted
>======================
>libparted : 1.8.6
>======================
>
>(gparted:18174): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_file: assertion `fil                                                 ename != NULL' failed
>
>(gparted:18174): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT                                                  (object)' failed
>Segmentation fault
>[root@localhost ~]# gparted
>======================
>libparted : 1.8.6
>======================
>
>(gparted:18727): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_file: assertion `fil                                                 ename != NULL' failed
>
>(gparted:18727): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT                                                  (object)' failed
>Segmentation fault
>
>created a partion , verifed it was there after the application crashes then ran :
>
>
>[root@localhost ~]#
>Password:
>[root@localhost ~]# fsck /dev/sde1
>fsck 1.39 (29-May-2006)
>e2fsck 1.39 (29-May-2006)
>/dev/sde1: clean, 11/120576 files, 8192/240967 blocks
>You have new mail in /var/spool/mail/root
>[root@localhost ~]# fsck /dev/sdc1
>fsck 1.39 (29-May-2006)
>e2fsck 1.39 (29-May-2006)
>/dev/sdc1: clean, 11/105504 files, 7631/210845 blocks
>
>
>then ran qtparted to compare and verify the (know) issue of attributes):
>
>[root@localhost ~]# qtparted
>ScimInputContextPlugin()
>~ScimInputContextPlugin()
>ScimInputContextPlugin()
>Error: File system has an incompatible feature enabled.
>Error: File system has an incompatible feature enabled.
>Error: File system has an incompatible feature enabled.
>Error: File system has an incompatible feature enabled.
>Error: Could not detect file system.
>Error: File system was not cleanly unmounted!  You should run e2fsck.  Modifying
> an unclean file system could cause severe corruption.
>Error: Could not detect file system.
>Error: Could not detect file system.
>Error: File system has an incompatible feature enabled.
>Error: File system has an incompatible feature enabled.
>Error: Could not detect file system.
>~ScimInputContextPlugin()
>
>and now size reporting just over 400gig on a drfive it reported 500gig when formatted with systemrescue / gparted as per original bug text, the error is reproducible:
>
>
>[root@localhost ~]# cat /sys/block/sdc/size
>792223792
>
>
>now  lets see smatctl
>
>
>
>[root@localhost ~]# smartctl -a /dev/sdc
>smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
>Home page is http://smartmontools.sourceforge.net/
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Seagate Barracuda 7200.10 family
>Device Model:     ST3500830A
>Serial Number:    9QG0V2KP
>Firmware Version: 3.AAC
>User Capacity:    405,618,581,504 bytes
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   7
>ATA Standard is:  Exact ATA specification draft version not indicated
>Local Time is:    Wed Jun 20 23:47:45 2007 EDT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82) Offline data collection activity
>                                        was completed without error.
>                                        Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0) The previous self-test routine completed
>                                        without error or no self-test has ever
>                                        been run.
>Total time to complete Offline
>data collection:                 ( 430) seconds.
>Offline data collection
>capabilities:                    (0x5b) SMART execute Offline immediate.
>                                        Auto Offline data collection on/off supp
>ort.
>                                        Suspend Offline collection upon new
>                                        command.
>                                        Offline surface scan supported.
>                                        Self-test supported.
>                                        No Conveyance Self-test supported.
>                                        Selective Self-test supported.
>SMART capabilities:            (0x0003) Saves SMART data before entering
>                                        power-saving mode.
>                                        Supports SMART auto save timer.
>Error logging capability:        (0x01) Error logging supported.
>                                        General Purpose Logging supported.
>Short self-test routine
>recommended polling time:        (   1) minutes.
>Extended self-test routine
>recommended polling time:        ( 163) minutes.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
>FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   109   099   006    Pre-fail  Always       -
>       187333585
>  3 Spin_Up_Time            0x0003   094   094   000    Pre-fail  Always       -
>       0
>  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -
>       16
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -
>       0
>  7 Seek_Error_Rate         0x000f   062   060   030    Pre-fail  Always       -
>       1603064
>  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -
>       28
> 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -
>       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -
>       18
>187 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -
>       0
>189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -
>       0
>190 Temperature_Celsius     0x0022   056   050   045    Old_age   Always       -
>       739835948
>194 Temperature_Celsius     0x0022   044   050   000    Old_age   Always       -
>       44 (Lifetime Min/Max 0/25)
>195 Hardware_ECC_Recovered  0x001a   064   060   000    Old_age   Always       -
>       193648710
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -
>       0
>198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -
>       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -                                                                  0
>200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -                                                                  0
>202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -                                                                  0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
> and for good measure 500gig sata on usb 
>
>[root@localhost ~]# smartctl -a /dev/sde
>smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
>Home page is http://smartmontools.sourceforge.net/
>
>Device: ST350063 0AS              Version: K
>Device type: disk
>Local Time is: Wed Jun 20 23:48:30 2007 EDT
>Device does not support SMART
>
>Error Counter logging not supported
>Device does not support Self Test logging
>[root@localhost ~]#             
>
>
>
>app logs available

Actions: View

Attachments on bug 244491: 157175 | 157514 | 157977