Attachment 157809 Details for Bug 245426 – dmesg output right after boot & login

dmesg output right after boot & login

dmesg_immediate_out.txt (text/plain), 20.67 KB, created by Kyle on 2007-06-25 20:31:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kyle

Created: 2007-06-25 20:31:30 UTC

Size: 20.67 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
> BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
> BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F7810, 0024 (r2 Nvidia)
>ACPI: XSDT 3FEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 3FEFA4C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FEF3240, 720D (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS 3FEF0000, 0040
>ACPI: HPET 3FEFA700, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 3FEFA780, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 3FEFA600, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fef0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003fef0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   261872
>On node 0 totalpages: 261775
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1280 pages reserved
>  DMA zone: 2663 pages, LIFO batch:0
>  DMA32 zone: 3524 pages used for memmap
>  DMA32 zone: 254252 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 256915
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 1866.778 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1022704k/1047488k available (2321k kernel code, 24396k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 3736.16 BogoMIPS (lpj=1868081)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 16667652
>Detected 16.667 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3733.62 BogoMIPS (lpj=1866813)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=77
>Time: 20:25:59  Date: 05/25/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
>pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0d: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:0d: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: d0000000-d2ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: b000-bfff
>  MEM window: d3000000-d4ffffff
>  PREFETCH window: 40000000-400fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>Time: tsc clocksource has been installed.
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3075k freed
>audit: initializing netlink socket (disabled)
>audit(1182803159.588:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 11:375:448
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 23, io mem 0xd5006000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xd5007000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_nv 0000:00:0e.0: version 3.3
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d400 irq 21
>ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d408 irq 21
>scsi0 : sata_nv
>ata1: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x00000000000109f7
>scsi1 : sata_nv
>usb 1-5: new low speed USB device using ohci_hcd and address 2
>usb 1-5: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-5
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
>ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
>ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata2.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 1:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001e800 irq 20
>ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001e808 irq 20
>scsi2 : sata_nv
>ata3: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x00000000000109e7
>scsi3 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x0000000000010967
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1182803168.415:2): selinux=0 auid=4294967295
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>input: PC Speaker as /class/input/input3
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>pata_amd 0000:00:0d.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
>scsi4 : pata_amd
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ATA: abnormal status 0x7F on port 0x00000000000101f7
>scsi5 : pata_amd
>nvidia: module license 'NVIDIA' taints kernel.
>ata6.00: ATAPI, max UDMA/66
>ata6.00: configured for UDMA/33
>scsi 5:0:0:0: CD-ROM            SONY     DVD RW DW-G120A  MYR5 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:06:0c.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>skge 1.10 addr 0xd4000000 irq 18 chip Yukon-Lite rev 9
>skge eth0: addr 00:18:f3:97:a7:61
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.11  Wed Jun 13 16:33:22 PDT 2007
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2032212k swap on /dev/sda2.  Priority:-1 extents:1 across:2032212k
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period

Actions: View

Attachments on bug 245426: 157672 | 157673 | 157702 | 157809 | 253771 | 296735 | 296759 | 296760