Attachment 157863 Details for Bug 245712 – nasd configuration

nasd configuration

nasd.conf (text/plain), 2.81 KB, created by Bob Gautier on 2007-06-26 09:39:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bob Gautier

Created: 2007-06-26 09:39:26 UTC

Size: 2.81 KB

patch

obsolete

>#
>#	A sample config file for the NAS Audio Server
>#
># $Id: nasd.conf.eg 234 2007-03-14 03:32:50Z jon $
># $NCDId: @(#)AUVoxConfig.eg,v 1.1 1996/04/24 17:00:06 greg Exp $
>#
>
>
># set this to 0 for no debugging, a larger number equals more debugging
>#  info... (defaults to 0)
>Debug 0
>
># be verbose, comment out if you don't want it
>Verbose
>
># set this to "yes" or "no" to indicate whether nasd should release the
>#  audio device when finished playing a sound.
># defaults to "yes"
># Only the voxware, hpux, and sun servers understand this for now.
>ReleaseDevice "yes"
>
># set this to "yes" or "no" to indicate whether nasd should keep the mixer
>#  device open when releasing the audio device.
># defaults to "yes"
># Only the voxware server understands this for now.
>KeepMixer "yes"
>
># init the mixer on startup? Voxware only.
># defaults to "yes"
>MixerInit	"yes"			
>
># Initialize the mixer settings on every audio device open?
># Settings are only initialized if MixerInit is set to "yes".
># Voxware only.
># defaults to "no"
>ReInitMixer "no"
>
># This is used on hpux.  Set to "INT" to use the internal speaker,
>#  set to "EXT" to use the external device (headphone/speakers).
># defaults to "EXT"
>OutDevType	"EXT"
>
># These are all used by voxware, nowhere else yet.
>
>inputsection
>
>	device		"/dev/dsp1"		# The input device, usually
>	mixer		"/dev/mixer1"		# mixer device
>        gain            50                      # default input gain (0-100)
>	maxrate		44100
>	minrate		4000			# Kind of redundant
>	maxfrags	3			# We want really low latency
>	minfrags	2			# the default
>	fragsize	256			# Again, for low latency
>	wordsize	8			# It only handles 8 bits anyway
>	numchans	2			# Glorious living mono
>	forcerate	"no"			# forces input rate to current
>	autoOpen        "yes"			# whether to open the dev
>						# at init
>	readwrite	"no"			# open 'device' read/write?
>end
>
># These are used by voxware only for now.
>outputsection
>	device		"/dev/dsp"		# The output device, usually
>	mixer		"/dev/mixer"		# mixer device
>        gain            50                      # default output gain (0-100)
>	maxrate		44100			# CD quality.
>	minrate		5000			# Redundant again
>	maxfrags	3			# Low latency (for doom!)
>	minfrags	2			# redundant really.
>	fragsize	256			# Low latency again..
>	wordsize	16			# Yes!
>	numchans	2			# HiFi Stereo!
>	forcerate	"no"			# forces output rate to current
>	autoOpen        "yes"			# whether to open the dev
>						# at init
>	readwrite	"yes"			# open 'device' read/write?
>end
>
>#
>#	An el cheapo full duplex setup could have the following output
>#	section with the above inputsection, assuming that all they had
>#	was an 8 bit SB and the PC speaker with the voxware server.
>#
>#       I really hope no one is saddled with this type of hardware in the
>#       21st century.  If so, I sympathize.
>#
>#
>#outputsection
>#	device	"/dev/pcaudio"
>#	maxrate		8000
>#	minrate		8000
>#	wordsize	8
>#end

Actions: View

Attachments on bug 245712: 157862 | 157863 | 157865 | 157866 | 157867 | 157868 | 157869 | 160244 | 160245