Attachment 157977 Details for Bug 244491 – boot dmseg log

boot dmseg log

dmesg (text/plain), 22.10 KB, created by Ian Fennell on 2007-06-27 01:41:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ian Fennell

Created: 2007-06-27 01:41:57 UTC

Size: 22.10 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7debug (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:35:32 EDT 2007
>Command line: root=/dev/sdb2  vga=791
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
> BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data)
> BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786416) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F4540, 0024 (r2 ACPIAM)
>ACPI: XSDT BFFF0100, 004C (r1 A M I  OEMXSDT  11000328 MSFT       97)
>ACPI: FACP BFFF0281, 00F4 (r1 A M I  OEMFACP  11000328 MSFT       97)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
>ACPI: DSDT BFFF0400, 293F (r1  0ABCF 0ABCF008        8 INTL  2002026)
>ACPI: FACS BFFFF000, 0040
>ACPI: APIC BFFF0380, 0074 (r1 A M I  OEMAPIC  11000328 MSFT       97)
>ACPI: OEMB BFFFF040, 0041 (r1 A M I  OEMBIOS  11000328 MSFT       97)
>ACPI: SRAT BFFF2D40, 00F0 (r1 A M I  OEMSRAT  11000328 MSFT       97)
>ACPI: ASF! BFFF2E30, 0086 (r1 AMIASF AMDSTRET        1 INTL  2002026)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 1 -> APIC 1 -> Node 1
>SRAT: Node 0 PXM 0 100000-80000000
>Entering add_active_range(0, 256, 524288) 0 entries of 3200 used
>SRAT: Node 1 PXM 1 80000000-c0000000
>Entering add_active_range(1, 524288, 786416) 1 entries of 3200 used
>SRAT: Node 0 PXM 0 0-80000000
>Entering add_active_range(0, 0, 159) 2 entries of 3200 used
>Entering add_active_range(0, 256, 524288) 3 entries of 3200 used
>NUMA: Using 31 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000080000000
>Bootmem setup node 1 0000000080000000-00000000bfff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524288
>    1:   524288 ->   786416
>On node 0 totalpages: 524191
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2370 pages reserved
>  DMA zone: 1541 pages, LIFO batch:0
>  DMA32 zone: 11176 pages used for memmap
>  DMA32 zone: 509016 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>On node 1 totalpages: 262128
>  DMA zone: 0 pages used for memmap
>  DMA32 zone: 5631 pages used for memmap
>  DMA32 zone: 256497 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x5008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfebfe000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfebfe000, GSI 24-27
>ACPI: IOAPIC (id[0x04] address[0xfebff000] gsi_base[28])
>IOAPIC[2]: apic_id 4, address 0xfebff000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3f7c0000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 2 zonelists.  Total pages: 767054
>Kernel command line: root=/dev/sdb2  vga=791
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1395.665 MHz processor.
>Console: colour dummy device 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>CPU 0: aperture @ 1b60000000 size 512 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Memory: 3058520k/3145664k available (2473k kernel code, 86756k reserved, 1449k data, 328k init)
>Calibrating delay using timer specific routine.. 2793.59 BogoMIPS (lpj=1396799)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12461316
>Detected 12.461 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2790.91 BogoMIPS (lpj=1395458)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 1
>AMD Opteron(tm) Processor 240 stepping 01
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=0,756
>Time: 21:21:42  Date: 05/26/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:03:06.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: Power Resource [GFAN] (on)
>ACPI: Power Resource [LFAN] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0a: ioport range 0x295-0x296 has been reserved
>pnp: 00:0a: ioport range 0x778-0x77f has been reserved
>pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved
>pnp: 00:0a: ioport range 0xf78-0xf7f has been reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0c: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0c: iomem range 0xff780000-0xff7fffff could not be reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: b000-bfff
>  MEM window: fca00000-feafffff
>  PREFETCH window: ff500000-ff5fffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: fc900000-fc9fffff
>  PREFETCH window: ff400000-ff4fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: fc800000-fc8fffff
>  PREFETCH window: ff300000-ff3fffff
>Time: acpi_pm clocksource has been installed.
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3179k freed
>audit: initializing netlink socket (disabled)
>audit(1182892903.042:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0a.0 subordinate bus.
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0b.0 subordinate bus.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xfd000000, mapped to 0xffffc20000080000, using 3072k, total 8128k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Fan [FN00] (on)
>ACPI: Fan [FN01] (on)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (48 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Power state transitions not supported
>powernow-k8: Power state transitions not supported
>  Magic number: 11:6:400
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 328k freed
>Write protecting the kernel read-only data: 1063k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:03:08.0: UHCI Host Controller
>uhci_hcd 0000:03:08.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:03:08.0: irq 16, io base 0x0000bf40
>usb usb1: configuration #1 chosen from 1 choice
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:03:08.1[B] -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:03:08.1: UHCI Host Controller
>uhci_hcd 0000:03:08.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:03:08.1: irq 17, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ACPI: PCI Interrupt 0000:03:08.2[C] -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:03:08.2: EHCI Host Controller
>ehci_hcd 0000:03:08.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:03:08.2: irq 18, io mem 0xfeafec00
>ehci_hcd 0000:03:08.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>pata_amd 0000:00:07.1: version 0.2.8
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>scsi0 : pata_amd
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>ata1.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768
>ata1.00: ATA-7: ST3400620A, 3.AAC, max UDMA/100
>ata1.00: 781422768 sectors, multi 16: LBA48 
>ata1.01: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 771751983
>ata1.01: ATA-7: ST3400620A, 3.AAC, max UDMA/100
>ata1.01: 781422768 sectors, multi 16: LBA48 
>usb 3-1: configuration #1 chosen from 1 choice
>ata1.00: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768
>ata1.00: configured for UDMA/100
>input:   USB Keyboard as /class/input/input2
>input: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:03:00.0-1
>ata1.01: ata_hpa_resize 1: sectors = 781422768, hpa_sectors = 781422768
>ata1.01: configured for UDMA/100
>scsi1 : pata_amd
>input:   USB Keyboard as /class/input/input3
>input: USB HID v1.10 Device [  USB Keyboard] on usb-0000:03:00.0-1
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>ata2.00: ATAPI, max UDMA/33
>usb 5-1: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ata2.01: ata_hpa_resize 1: sectors = 792223792, hpa_sectors = 976773168
>ata2.01: Host Protected Area detected:
>	current size: 792223792 sectors
>	native size: 976773168 sectors
>ata2.01: ATA-7: ST3500830A, 3.AAC, max UDMA/100
>ata2.01: 792223792 sectors, multi 16: LBA48 
>usb 5-2: new high speed USB device using ehci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 7 ports detected
>ata2.00: configured for UDMA/33
>ata2.01: ata_hpa_resize 1: sectors = 792223792, hpa_sectors = 976773168
>ata2.01: Host Protected Area detected:
>	current size: 792223792 sectors
>	native size: 976773168 sectors
>ata2.01: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3400620A       3.AA PQ: 0 ANSI: 5
>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: Direct-Access     ATA      ST3400620A       3.AA PQ: 0 ANSI: 5
>SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 0:0:1:0: Attached scsi disk sdb
>scsi 1:0:0:0: CD-ROM            BENQ     DVD DUAL DW1610  B8B9 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      ST3500830A       3.AA PQ: 0 ANSI: 5
>SCSI device sdc: 792223792 512-byte hdwr sectors (405619 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 792223792 512-byte hdwr sectors (405619 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 1:0:1:0: Attached scsi disk sdc
>usb 1-1: USB disconnect, address 2
>usb 5-2: USB disconnect, address 3
>usb 5-2: new high speed USB device using ehci_hcd and address 5
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 7 ports detected
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-2.7: new high speed USB device using ehci_hcd and address 6
>usb 5-2.7: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>Initializing USB Mass Storage driver...
>usb 5-1: USB disconnect, address 2
>usb 5-1: new high speed USB device using ehci_hcd and address 7
>usb 5-1: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
>scsi 2:0:0:0: Direct-Access     Brother  MFC-420CN        1.00 PQ: 0 ANSI: 2
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     MAXTOR 4 K020H1           1500 PQ: 0 ANSI: 2 CCS
>sd 3:0:0:0: Attached scsi removable disk sdd
>sd 2:0:0:0: Attached scsi removable disk sde
>SCSI device sdf: 39876480 512-byte hdwr sectors (20417 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 38 00 00
>sdf: assuming drive cache: write through
>SCSI device sdf: 39876480 512-byte hdwr sectors (20417 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 38 00 00
>sdf: assuming drive cache: write through
> sdf: unknown partition table
>sd 4:0:0:0: Attached scsi disk sdf
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1182892924.783:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>sd 1:0:1:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>sd 2:0:0:0: Attached scsi generic sg5 type 0
>sd 4:0:0:0: Attached scsi generic sg6 type 0
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>AMD768 RNG detected
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>input: PC Speaker as /class/input/input4
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>tg3.c:v3.75.2 (June 5, 2007)
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 29 (level, low) -> IRQ 29
>tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
>tg3: Could not obtain valid ethernet address, aborting.
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>tg3: probe of 0000:01:02.0 failed with error -22
>ACPI: PCI Interrupt 0000:01:02.1[B] -> GSI 30 (level, low) -> IRQ 30
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0162
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed.
>eth0: Tigon3 [partno(none) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:0c:76:18:4d:ba
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 17 (level, low) -> IRQ 17
>loop: loaded (max 8 devices)
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb2, internal journal
>Adding 2072344k swap on /dev/sda8.  Priority:-1 extents:1 across:2072344k
>Adding 2040212k swap on /dev/sda9.  Priority:-2 extents:1 across:2040212k
>Adding 2337416k swap on /dev/sda10.  Priority:-3 extents:1 across:2337416k

Actions: View

Attachments on bug 244491: 157175 | 157514 | 157977