Attachment 158098 Details for Bug 246056 – lspci -vv output (with irqpoll enabled)

lspci -vv output (with irqpoll enabled)

lspci.txt (text/plain), 8.48 KB, created by Pekka Savola on 2007-06-28 07:17:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pekka Savola

Created: 2007-06-28 07:17:06 UTC

Size: 8.48 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at <unassigned> (32-bit, prefetchable)
>	Capabilities: [40] Vendor Specific Information
>
>00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 1
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 1
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at 1800 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 1820 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 11
>	Region 4: I/O ports at 1840 [size=32]
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=07, sec-latency=64
>	I/O behind bridge: 00003000-00007fff
>	Memory behind bridge: d0200000-dfffffff
>	Prefetchable memory behind bridge: f0000000-f7ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1860 [size=16]
>	Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
>
>00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 1880 [size=32]
>
>00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 1c00 [size=256]
>	Region 1: I/O ports at 18c0 [size=64]
>
>00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 2400 [size=256]
>	Region 1: I/O ports at 2000 [size=128]
>
>01:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
>	Memory window 0: f0000000-f3fff000 (prefetchable)
>	Memory window 1: d4000000-d7fff000
>	I/O window 0: 00003000-000030ff
>	I/O window 1: 00003400-000034ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>01:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168
>	Interrupt: pin B routed to IRQ 11
>	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=01, secondary=06, subordinate=06, sec-latency=176
>	Memory window 0: f4000000-f7fff000 (prefetchable)
>	Memory window 1: d8000000-dbfff000
>	I/O window 0: 00003800-000038ff
>	I/O window 1: 00003c00-00003cff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>01:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (prog-if 10 [OHCI])
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (500ns min, 1000ns max)
>	Interrupt: pin C routed to IRQ 11
>	Region 0: Memory at d0201000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME+
>
>01:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
>	Subsystem: IBM ThinkPad A/T/X Series
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at 7000 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>

Actions: View

Attachments on bug 246056: 158096 | 158097 | 158098 | 160716