Attachment 158161 Details for Bug 246157 – dmesg output

dmesg output

dmesg.txt (text/plain), 19.30 KB, created by Jérôme Benoit on 2007-06-28 21:04:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jérôme Benoit

Created: 2007-06-28 21:04:47 UTC

Size: 19.30 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 15:37:31 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009e800 end: 000000000009e800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009e800 size: 0000000000001800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001beec000 end: 000000001bfec000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001bfec000 size: 0000000000003000 end: 000000001bfef000 type: 3
>copy_e820_map() start: 000000001bfef000 size: 0000000000010000 end: 000000001bfff000 type: 2
>copy_e820_map() start: 000000001bfff000 size: 0000000000001000 end: 000000001c000000 type: 4
>copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bfec000 (usable)
> BIOS-e820: 000000001bfec000 - 000000001bfef000 (ACPI data)
> BIOS-e820: 000000001bfef000 - 000000001bfff000 (reserved)
> BIOS-e820: 000000001bfff000 - 000000001c000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114668) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114668
>  HighMem    114668 ->   114668
>early_node_map[1] active PFN ranges
>    0:        0 ->   114668
>On node 0 totalpages: 114668
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 863 pages used for memmap
>  Normal zone: 109709 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6A70, 0014 (r0 ASUS  )
>ACPI: RSDT 1BFEC000, 002C (r1 ASUS   A7V-133  30303031 MSFT 31313031)
>ACPI: FACP 1BFEC080, 0074 (r1 ASUS   A7V-133  30303031 MSFT 31313031)
>ACPI: DSDT 1BFEC100, 2CE1 (r1   ASUS A7V-133      1000 MSFT  100000B)
>ACPI: FACS 1BFFF000, 0040
>ACPI: BOOT 1BFEC040, 0028 (r1 ASUS   A7V-133  30303031 MSFT 31313031)
>ACPI: PM-Timer IO Port: 0xe408
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e3ff0000)
>Built 1 zonelists.  Total pages: 113773
>Kernel command line: ro root=/dev/md2 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0138b000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 807.290 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 446612k/458672k available (2066k kernel code, 11356k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdbfec000   ( 447 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604bc2 - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604bc2   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1615.54 BogoMIPS (lpj=807770)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0183f1ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 1c20)
>CPU0: AMD Duron(tm) Processor stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time: 20:21:58  Date: 05/28/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
>PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
>PCI quirk: region e800-e80f claimed by vt82c686 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x1bffffff could not be reserved
>pnp: 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
>pnp: 00:03: ioport range 0xe400-0xe47f has been reserved
>pnp: 00:03: ioport range 0xe800-0xe80f has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d6000000-d7dfffff
>  PREFETCH window: d7f00000-e5ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3058k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1183062118.718:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 949CEA51B56F22EC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Applying VIA southbridge workaround.
>PCI: Disabling Via external APIC routing
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 16 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
>agpgart: AGP aperture is 32M @ 0xe6000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Time: acpi_pm clocksource has been installed.
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 631 not supported
>Using IPI No-Shortcut mode
>  Magic number: 11:50:398
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.2: irq 5, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:04.3: UHCI Host Controller
>uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:04.3: irq 5, io base 0x0000d000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>md: raid1 personality registered for level 1
>raid5: measuring checksumming speed
>   8regs     :  1016.000 MB/sec
>   8regs_prefetch:  1016.000 MB/sec
>   32regs    :   696.000 MB/sec
>   32regs_prefetch:   828.000 MB/sec
>   pII_mmx   :  2168.000 MB/sec
>   p5_mmx    :  2884.000 MB/sec
>raid5: using function: p5_mmx (2884.000 MB/sec)
>raid6: int32x1    253 MB/s
>raid6: int32x2    300 MB/s
>raid6: int32x4    292 MB/s
>raid6: int32x8    269 MB/s
>raid6: mmxx1      613 MB/s
>raid6: mmxx2      886 MB/s
>raid6: sse1x1     593 MB/s
>raid6: sse1x2     992 MB/s
>raid6: using algorithm sse1x2 (992 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ata1: PATA max UDMA/100 cmd 0x00019800 ctl 0x00019402 bmdma 0x00018400 irq 10
>ata2: PATA max UDMA/100 cmd 0x00019000 ctl 0x00018802 bmdma 0x00018408 irq 10
>scsi0 : pata_pdc202xx_old
>ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata1.00: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
>ata1.00: 160836480 sectors, multi 16: LBA48 
>ata1.01: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata1.01: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
>ata1.01: 160836480 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata1.00: configured for UDMA/33
>ata1.01: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata1.01: configured for UDMA/33
>scsi1 : pata_pdc202xx_old
>ata2.00: ata_hpa_resize 1: sectors = 80418240, hpa_sectors = 120103200
>ata2.00: Host Protected Area detected:
>	current size: 80418240 sectors
>	native size: 120103200 sectors
>ata2.00: ATA-6: ExcelStor Technology J340, V22OA63A, max UDMA/100
>ata2.00: 80418240 sectors, multi 16: LBA48 
>ata2.01: ata_hpa_resize 1: sectors = 120103200, hpa_sectors = 120103200
>ata2.01: ATA-6: ExcelStor Technology J360, V22OA63A, max UDMA/100
>ata2.01: 120103200 sectors, multi 16: LBA48 
>ata2.00: ata_hpa_resize 1: sectors = 80418240, hpa_sectors = 120103200
>ata2.00: Host Protected Area detected:
>	current size: 80418240 sectors
>	native size: 120103200 sectors
>ata2.00: configured for UDMA/33
>ata2.01: ata_hpa_resize 1: sectors = 120103200, hpa_sectors = 120103200
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HDS728080PLAT20  PF2O PQ: 0 ANSI: 5
>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: Direct-Access     ATA      HDS728080PLAT20  PF2O PQ: 0 ANSI: 5
>SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 0:0:1:0: Attached scsi disk sdb
>scsi 1:0:0:0: Direct-Access     ATA      ExcelStor Techno V22O PQ: 0 ANSI: 5
>SCSI device sdc: 80418240 512-byte hdwr sectors (41174 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 80418240 512-byte hdwr sectors (41174 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 1:0:0:0: Attached scsi disk sdc
>scsi 1:0:1:0: Direct-Access     ATA      ExcelStor Techno V22O PQ: 0 ANSI: 5
>SCSI device sdd: 120103200 512-byte hdwr sectors (61493 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 120103200 512-byte hdwr sectors (61493 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 1:0:1:0: Attached scsi disk sdd
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>md: md2 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: md1 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1183062128.946:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: Attached scsi generic sg2 type 0
>sd 1:0:1:0: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>pata_via 0000:00:04.1: version 0.2.1
>ata3: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14
>ata4: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15
>scsi2 : pata_via
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport_pc: VIA parallel port: io=0x378, irq=7
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/natsemi.html
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ata3.00: ATAPI, max UDMA/33
>ata3.00: configured for UDMA/33
>scsi3 : pata_via
>scsi 2:0:0:0: CD-ROM            SAMSUNG  CD-R/RW SW-252F  R801 PQ: 0 ANSI: 5
>scsi 2:0:0:0: Attached scsi generic sg4 type 5
>i2c_adapter i2c-9191: sensors disabled - enable with force_addr=0xe200
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>natsemi eth0: NatSemi DP8381[56] at 0xd5800000 (0000:00:09.0), 00:a0:cc:78:39:9f, IRQ 5, port TP.
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
>sr0: scsi3-mmc drive: 52x/1x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: md3 stopped.
>md: bind<sdb4>
>md: bind<sda4>
>raid1: raid set md3 active with 2 out of 2 mirrors
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052152k swap on /dev/md1.  Priority:-1 extents:1 across:1052152k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: DSPCFG accepted after 0 usec.
>eth0: link up.
>eth0: Setting full-duplex based on negotiated link capability.
>audit(1183062153.152:3): audit_pid=1891 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Bridge firewalling registered
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3583 buckets, 28664 max)
>virbr0: no IPv6 routers present

Actions: View

Attachments on bug 246157: 158161