Attachment 158439 Details for Bug 244116 – bootlog with broken dmraid and LVM

bootlog with broken dmraid and LVM

bootlog-dmraid-1.0.0.rc14-5_RHEL4_U5-broken.log (text/plain), 14.42 KB, created by Karl Grindley on 2007-07-03 13:35:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Karl Grindley

Created: 2007-07-03 13:35:27 UTC

Size: 14.42 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol01 console=ttyS0,38400)
>Linux version 2.6.9-55.0.2.ELsmp (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Tue Jun 12 17:58:20 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
> BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data)
> BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
>Enabling SRAT NUMA discovery
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 1 -> APIC 2 -> Node 1
>SRAT: PXM 1 -> APIC 3 -> Node 1
>SRAT: Node 0 PXM 0 100000-bfffffff
>SRAT: Node 1 PXM 1 140000000-23fffffff
>SRAT: Node 0 PXM 0 100000-13fffffff
>SRAT: Node 0 PXM 0 0-13fffffff
>Warning: acpi_table_parse(ACPI_SLIT) returned 0!
>Bootmem setup node 0 0000000000000000-000000013fffffff
>Bootmem setup node 1 0000000140000000-000000023fffffff
>DMI 2.3 present.
>ACPI: PM-Timer IO Port: 0x5008
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 15:1 APIC version 16
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfebfe000] gsi_base[40])
>IOAPIC[1]: apic_id 9, version 17, address 0xfebfe000, GSI 40-46
>ACPI: IOAPIC (id[0x0a] address[0xfebff000] gsi_base[47])
>IOAPIC[2]: apic_id 10, version 17, address 0xfebff000, GSI 47-53
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c4000000 (gap: c0000000:3f780000)
>Checking aperture...
>CPU 0: aperture @ 4000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ 4000000
>Built 2 zonelists
>Kernel command line: ro root=/dev/VolGroup00/LogVol01 console=ttyS0,38400
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2405.531 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Memory: 8161320k/9437184k available (2113k kernel code, 0k reserved, 1305k data, 208k init)
>Calibrating delay using timer specific routine.. 4817.57 BogoMIPS (lpj=2408786)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Node 0
>BIOS bug: Legacy-free FADT detected, but FADT size (129) is incorrect!
>Using local APIC NMI watchdog using perfctr0
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Node 0
>CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02
>per-CPU timeslice cutoff: 1024.16 usecs.
>task migration cache decay timeout: 1 msecs.
>Booting processor 1/1 rip 6000 rsp 101418b9f58
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.23 BogoMIPS (lpj=2405116)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Node 0
>Dual Core AMD Opteron(tm) Processor 280 stepping 02
>Booting processor 2/2 rip 6000 rsp 1023c7abf58
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4810.23 BogoMIPS (lpj=2405118)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 2(2) -> Node 1
>Dual Core AMD Opteron(tm) Processor 280 stepping 02
>Booting processor 3/3 rip 6000 rsp 1013b983f58
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4810.24 BogoMIPS (lpj=2405124)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 3(2) -> Node 1
>Dual Core AMD Opteron(tm) Processor 280 stepping 02
>Total of 4 processors activated (19248.28 BogoMIPS).
>Using local APIC timer interrupts.
>Detected 12.528 MHz APIC timer.
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>Disabling vsyscall due to use of PM timer
>time.c: Using PM based timekeeping.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 42 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 49 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 50 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 169
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 17 (level, low) -> IRQ 201
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ 4000000 size 65536 KB
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1183453438.542:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 1F57BD3D511E78D1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports C1, 8 throttling states)
>ACPI: Processor [CPU2] (supports C1)
>ACPI: Processor [CPU3] (supports C1)
>ACPI: Processor [CPU4] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>AMD8111: IDE controller at PCI slot 0000:00:07.1
>AMD8111: chipset revision 3
>AMD8111: not 100% native mode: will probe irqs later
>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>hdd: TOSHIBA ODD-DVD SD-C2732, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide1 at 0x170-0x177,0x376 on irq 15
>hdd: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 4 Dual Core AMD Opteron(tm) Processor 280 processors (version 2.00.00-rhel4)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: No _PSS objects for CPU other than CPU0
>powernow-k8: No _PSS objects for CPU other than CPU0
>powernow-k8: No _PSS objects for CPU other than CPU0
>ACPI wakeup devices: 
>PCI1 USB0 USB1 PS2K PS2M UAR1 UAR2 POGA POGB PWRB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 208k freed
>Red Hat nash version 4.2.1.8 starting
>Mounted /proc filesystem
>Mounting sysfs
>Creating /dev
>SCSI subsystem initialized
>Starting udev
>Loading scsi_mod.ko module
>Loadisata_mv 0000:03:03.0: version 0.7
>ng sd_mod.ko modACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 42 (level, low) -> IRQ 177
>ule
>Loading libsata_mv 0000:03:03.0: Applying B2 workarounds to unknown rev
>ata.ko module
>Lsata_mv 0000:03:03.0: 32 slots 4 ports unknown mode IRQ via INTx
>oading sata_mv.kata1: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFFF00000A2120 bmdma 0x0 irq 177
>o module
>ata2: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFFF00000A4120 bmdma 0x0 irq 177
>ata3: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFFF00000A6120 bmdma 0x0 irq 177
>ata4: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFFF00000A8120 bmdma 0x0 irq 177
>scsi0 : sata_mv
>ata1.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 0
>ata1.00: configured for UDMA/133
>scsi1 : sata_mv
>ata2.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi2 : sata_mv
>ata3: no device found (phy stat 00000000)
>scsi3 : sata_mv
>ata4: no device found (phy stat 00000000)
>  Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: ST3300622AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>Loading dm-mod.kdevice-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>o module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>cdrom: open failed.
>  Found volume group "VolGroup01" using metadata type lvm2
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumkjournald starting.  Commit interval 5 seconds
>es
>  2 logical EXT3-fs: mounted filesystem with ordered data mode.
>volume(s) in volume group "VolGroup00" now active
>Creating root device
>Mounting root filesystem
>Switching to new root
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>INIT: version 2.85 booting
>Setting default font (latarcyrheb-sun16): [  OK  ]
>
>		Welcome to Red Hat Enterprise Linux WS
>		Press 'I' to enter interactive startup.
>Starting udev:  [  OK  ]
>Initializing hardware...  storage network audio done[  OK  ]
>Configuring kernel parameters:  [  OK  ]
>Setting clock  (localtime): Tue Jul  3 09:04:11 EDT 2007 [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname grid63-12x:  [  OK  ]
>Checking root filesystem
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol01 
>/dev/VolGroup00/LogVol01: clean, 86930/7995392 files, 810510/15974400 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>ddf1: physical drives with CRC 9513BC8E, expected 8C26D753 on /dev/sda
>ddf1: physical drives with CRC 9513BC8E, expected 8C26D753 on /dev/sdb
>ERROR: dos: partition address past end of RAID device
>Setting up Logical Volume Management: [  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>/boot: clean, 46/66264 files, 36110/265040 blocks
>[  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling swap space:  [  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Starting monitoring for VG VolGroup00: [  OK  ]
>Starting monitoring for VG VolGroup01: [  OK  ]
>Checking for new hardware [  OK  ]
>Starting pcmcia:  [  OK  ]
>Setting network parameters:  [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting portmap: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting lm_sensors:  [  OK  ]
>Starting automount: No Mountpoints Defined[  OK  ]
>Starting smartd: [  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting cups: [  OK  ]
>Starting sshd:[  OK  ]
>Starting xinetd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting cfengine server daemon (cfservd): [  OK  ]
>Starting system message bus: [  OK  ]
>Starting Red Hat Network Daemon: [  OK  ]
>Starting cfengine anomaly detection service (cfenvd): [  OK  ]
>Starting cups-config-daemon: [  OK  ]
>Starting HAL daemon: [  OK  ]

Actions: View

Attachments on bug 244116: 158438 | 158439