Attachment 158606 Details for Bug 242836 – dmesg after boot with apic=debug

dmesg after boot with apic=debug

dmesg.redex.f7-apic-debug (text/plain), 25.23 KB, created by D. Hugh Redelmeier on 2007-07-05 18:03:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: D. Hugh Redelmeier

Created: 2007-07-05 18:03:57 UTC

Size: 25.23 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=LABEL=/ crashkernel=128M@16M apic=debug
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
> BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
> BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786160) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F8650, 0014 (r0 HP-CPC)
>ACPI: RSDT BFEF3040, 0034 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP BFEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT BFEF31C0, 3C4E (r1 HP-CPC AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS BFEF0000, 0040
>ACPI: SSDT BFEF6F40, 0188 (r1 HP-CPC POWERNOW        1  LTP        1)
>ACPI: MCFG BFEF7140, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC BFEF6E80, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 00000000bfef0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786160) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-00000000bfef0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   786160
>On node 0 totalpages: 786063
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1282 pages reserved
>  DMA zone: 2661 pages, LIFO batch:0
>  DMA32 zone: 10692 pages used for memmap
>  DMA32 zone: 771372 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>mapped APIC to ffffffffff5fd000 (        fee00000)
>mapped IOAPIC to ffffffffff5fc000 (00000000fec00000)
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 774033
>Kernel command line: ro root=LABEL=/ crashkernel=128M@16M apic=debug
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1989.908 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>CPU 0: aperture @ 230000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2955472k/3144640k available (2321k kernel code, 188780k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 3981.96 BogoMIPS (lpj=1990984)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>enabled ExtINT on CPU#0
>ENABLING IO-APIC IRQs
>Synchronizing Arb IDs.
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0<7>IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
>IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
>, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Using local APIC timer interrupts.
>result 12436942
>Detected 12.436 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>masked ExtINT on CPU#1
>Calibrating delay using timer specific routine.. 3981.12 BogoMIPS (lpj=1990561)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=254
>Time: 13:46:30  Date: 06/05/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
>IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>number of MP IRQ sources: 15.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>
>IO APIC #2......
>.... register #00: 00000000
>.......    : physical APIC id: 00
>.... register #01: 00178021
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 1
>.......     : IO APIC version: 0021
>.... register #02: 00000000
>.......     : arbitration: 00
>.... IRQ redirection table:
> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
> 00 000 1    0    0   0   0    0    0    00
> 01 000 0    0    0   0   0    0    0    31
> 02 000 1    0    0   0   0    0    0    30
> 03 000 0    0    0   0   0    0    0    33
> 04 000 0    0    0   0   0    0    0    34
> 05 000 0    0    0   0   0    0    0    35
> 06 000 0    0    0   0   0    0    0    36
> 07 000 1    0    0   0   0    0    0    37
> 08 000 0    0    0   0   0    0    0    38
> 09 000 0    1    0   1   0    0    0    39
> 0a 000 0    0    0   0   0    0    0    3A
> 0b 000 0    0    0   0   0    0    0    3B
> 0c 000 0    0    0   0   0    0    0    3C
> 0d 000 0    0    0   0   0    0    0    3D
> 0e 000 0    0    0   0   0    0    0    3E
> 0f 000 0    0    0   0   0    0    0    3F
> 10 000 1    0    0   0   0    0    0    00
> 11 000 1    0    0   0   0    0    0    00
> 12 000 1    0    0   0   0    0    0    00
> 13 000 1    0    0   0   0    0    0    00
> 14 000 1    0    0   0   0    0    0    00
> 15 000 1    0    0   0   0    0    0    00
> 16 000 1    0    0   0   0    0    0    00
> 17 000 1    0    0   0   0    0    0    00
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x228-0x22f has been reserved
>pnp: 00:01: ioport range 0x40b-0x40b has been reserved
>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
>pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
>pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
>pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
>pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0b: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: e000-efff
>Time: acpi_pm clocksource has been installed.
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: d000-dfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3109k freed
>audit: initializing netlink socket (disabled)
>audit(1183643190.544:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>  Magic number: 15:992:785
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>logips2pp: Detected unknown logitech mouse model 11
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>IOAPIC[0]: Set routing entry (2-19 -> 0x49 -> IRQ 19 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>input: PS/2 Logitech Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_sil 0000:00:12.0: version 2.1
>IOAPIC[0]: Set routing entry (2-22 -> 0x51 -> IRQ 22 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ata1: SATA max UDMA/100 cmd 0xffffc20000020080 ctl 0xffffc2000002008a bmdma 0xffffc20000020000 irq 22
>ata2: SATA max UDMA/100 cmd 0xffffc200000200c0 ctl 0xffffc200000200ca bmdma 0xffffc20000020008 irq 22
>scsi0 : sata_sil
>usb 3-1: new high speed USB device using ehci_hcd and address 2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E01, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi1 : sata_sil
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>usb 3-1.1: new high speed USB device using ehci_hcd and address 5
>usb 3-1.1: configuration #1 chosen from 1 choice
>hub 3-1.1:1.0: USB hub found
>hub 3-1.1:1.0: 3 ports detected
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2
>usb 2-4: new full speed USB device using ohci_hcd and address 2
>usb 2-4: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 3-1.1.1: new high speed USB device using ehci_hcd and address 6
>usb 3-1.1.1: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>IOAPIC[0]: Set routing entry (2-16 -> 0x59 -> IRQ 16 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>ata3: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f800 irq 14
>ata4: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f808 irq 15
>scsi2 : pata_atiixp
>ata3.00: ATAPI, max UDMA/33
>ata3.01: ATAPI, max UDMA/33
>ata3.00: configured for UDMA/33
>ata3.01: configured for UDMA/33
>scsi3 : pata_atiixp
>ATA: abnormal status 0x7F on port 0x0000000000010177
>scsi 2:0:0:0: CD-ROM            HP       DVD Writer 740b  HI24 PQ: 0 ANSI: 5
>scsi 2:0:1:0: CD-ROM            TSSTcorp DVD-ROM TS-H352C HP01 PQ: 0 ANSI: 5
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi removable disk sdb
>sd 4:0:0:1: Attached scsi removable disk sdc
>sd 4:0:0:2: Attached scsi removable disk sdd
>sd 4:0:0:3: Attached scsi removable disk sde
>usb-storage: device scan complete
>scsi 5:0:0:0: Direct-Access     Generic  Flash HS-CF      4.49 PQ: 0 ANSI: 0
>scsi 5:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.49 PQ: 0 ANSI: 0
>sd 5:0:0:0: Attached scsi removable disk sdf
>sd 5:0:0:1: Attached scsi removable disk sdg
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1183643206.726:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1823 types, 79 bools, 1 sens, 1024 cats
>security:  61 classes, 68305 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1183643206.945:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>scsi 2:0:1:0: Attached scsi generic sg2 type 5
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:1: Attached scsi generic sg4 type 0
>sd 4:0:0:2: Attached scsi generic sg5 type 0
>sd 4:0:0:3: Attached scsi generic sg6 type 0
>sd 5:0:0:0: Attached scsi generic sg7 type 0
>sd 5:0:0:1: Attached scsi generic sg8 type 0
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>sr 2:0:1:0: Attached scsi CD-ROM sr1
>8139too Fast Ethernet driver 0.9.28
>IOAPIC[0]: Set routing entry (2-20 -> 0x61 -> IRQ 20 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xffffc20000022000, 00:13:d3:4f:93:ea, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>input: PC Speaker as /class/input/input4
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Linux video capture interface: v2.00
>IOAPIC[0]: Set routing entry (2-21 -> 0x69 -> IRQ 21 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
>fw_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
>bttv0: Bt848 (rev 18) at 0000:02:01.0, irq: 21, latency: 64, mmio: 0xfddff000
>bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ff3fff [init]
>tveeprom 0-0050: Huh, no eeprom present (err=-121)?
>bttv0: using tuner=-1
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>bttv0: registered device video0
>bttv0: registered device vbi0
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>fw_core: created new fw device fw0 (0 config rom retries)
>IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda9, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>Adding 6144820k swap on /dev/sda7.  Priority:-1 extents:1 across:6144820k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1183657623.830:4): audit_pid=2156 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>IOAPIC[0]: Set routing entry (2-18 -> 0x81 -> IRQ 18 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18

Actions: View

Attachments on bug 242836: 156305 | 156306 | 156307 | 156308 | 157212 | 157213 | 157515 | 157516 | 158321 | 158404 | 158606 | 158724 | 160214