Attachment 158661 Details for Bug 247224 – /var/log/dmesg booting with webcam plugged in

/var/log/dmesg booting with webcam plugged in

dmesg.with-webcam (text/plain), 24.82 KB, created by Tom Horsley on 2007-07-06 13:45:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Horsley

Created: 2007-07-06 13:45:46 UTC

Size: 24.82 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=LABEL=FC7ROOT64 rhgb quiet audit=0 selinux=0 8250.nr_uarts=9
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.2 present.
>ACPI: RSDP 000F7A70, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF3180, 5EE0 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SSDT 7FFF9180, 01CA (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 7FFF93C0, 00A0 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 7FFF94C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FFF90C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>SRAT: Node 0 PXM 0 0-80000000
>Entering add_active_range(0, 0, 159) 1 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000007fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524272
>On node 0 totalpages: 524175
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1281 pages reserved
>  DMA zone: 2662 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513065 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515727
>Kernel command line: ro root=LABEL=FC7ROOT64 rhgb quiet audit=0 selinux=0 8250.nr_uarts=9
>audit: disabled (after initialization)
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2211.342 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 872000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2056448k/2097088k available (2321k kernel code, 40252k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 4423.94 BogoMIPS (lpj=2211974)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12564465
>Detected 12.564 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4422.15 BogoMIPS (lpj=2211075)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=421
>Time: 13:10:53  Date: 06/06/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>Boot video device is 0000:05:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 2 of device 0000:05:00.0
>PCI: Cannot allocate resource region 0 of device 0000:05:00.1
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
>pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: d000-dfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: fea00000-feafffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: c000-cfff
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: fe700000-fe7fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: fe600000-fe6fffff
>  PREFETCH window: fe500000-fe5fffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: a000-afff
>  MEM window: fe400000-fe4fffff
>  PREFETCH window: fe300000-fe3fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 9000-9fff
>  MEM window: fe200000-fe2fffff
>  PREFETCH window: b0000000-cfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>Time: acpi_pm clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3112k freed
>audit: initializing netlink socket (disabled)
>audit(1183727453.475:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 9 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS4: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS4 at I/O 0xdf00 (irq = 17) is a 16C950/954
>ttyS5: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS5 at I/O 0xdf08 (irq = 17) is a 16C950/954
>ttyS6: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS6 at I/O 0xdf10 (irq = 17) is a 16C950/954
>ttyS7: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS7 at I/O 0xdf18 (irq = 17) is a 16C950/954
>ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS8: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS8 at I/O 0xdd00 (irq = 17) is a 16C950/954
>ttyS1: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS1 at I/O 0xdd08 (irq = 17) is a 16C950/954
>ttyS2: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS2 at I/O 0xdd10 (irq = 17) is a 16C950/954
>ttyS3: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS3 at I/O 0xdd18 (irq = 17) is a 16C950/954
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>  Magic number: 15:449:179
>  hash matches device device:0f
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 22, io mem 0xfebfe000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_nv 0000:00:07.0: version 3.3
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0xffffc2000001e480 ctl 0xffffc2000001e4a0 bmdma 0x000000000001f600 irq 21
>ata2: SATA max UDMA/133 cmd 0xffffc2000001e580 ctl 0xffffc2000001e5a0 bmdma 0x000000000001f608 irq 21
>scsi0 : sata_nv
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata2.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
>ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>usb 2-2: configuration #1 chosen from 1 choice
>ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: Attached scsi disk sdb
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0xffffc20000020480 ctl 0xffffc200000204a0 bmdma 0x000000000001f100 irq 20
>ata4: SATA max UDMA/133 cmd 0xffffc20000020580 ctl 0xffffc200000205a0 bmdma 0x000000000001f108 irq 20
>scsi2 : sata_nv
>usb 2-3: new high speed USB device using ehci_hcd and address 3
>usb 2-3: configuration #1 chosen from 1 choice
>hub 2-3:1.0: USB hub found
>hub 2-3:1.0: 4 ports detected
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : sata_nv
>usb 2-4: new high speed USB device using ehci_hcd and address 4
>ata4: SATA link down (SStatus 0 SControl 300)
>usb 2-4: configuration #1 chosen from 1 choice
>usb 2-6: new high speed USB device using ehci_hcd and address 6
>usb 2-6: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 2-3.1: new low speed USB device using ehci_hcd and address 8
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: Chicony USB Gaming Keyboard Pro as /class/input/input1
>input: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.1-3.1
>input: Chicony USB Gaming Keyboard Pro as /class/input/input2
>input,hiddev96: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.1-3.1
>input: Chicony USB Gaming Keyboard Pro as /class/input/input3
>input: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.1-3.1
>usb 2-3.2: new low speed USB device using ehci_hcd and address 9
>usb 2-3.2: configuration #1 chosen from 1 choice
>input: Kensington USB/PS2 Wheel Mouse  as /class/input/input4
>input: USB HID v1.00 Mouse [Kensington USB/PS2 Wheel Mouse ] on usb-0000:00:02.1-3.2
>usb 1-5: new low speed USB device using ohci_hcd and address 2
>usb 1-5: configuration #1 chosen from 1 choice
>pata_amd 0000:00:06.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
>scsi4 : pata_amd
>ata5.00: ATAPI, max UDMA/66
>hiddev97: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 ] on usb-0000:00:02.0-5
>ata5.00: configured for UDMA/33
>scsi5 : pata_amd
>ATA: abnormal status 0x7F on port 0x0000000000010177
>scsi 4:0:0:0: CD-ROM            DVDRW    IDE 16X          A089 PQ: 0 ANSI: 5
>usb 1-10: new low speed USB device using ohci_hcd and address 3
>usb 1-10: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     Maxtor   OneTouch III     0341 PQ: 0 ANSI: 4
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 17 00 00 00
>sdc: assuming drive cache: write through
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 17 00 00 00
>sdc: assuming drive cache: write through
> sdc: sdc1 < sdc5 >
>sd 6:0:0:0: Attached scsi disk sdc
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>FDC 0 is a post-1991 82077
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>input: PC Speaker as /class/input/input5
>Linux video capture interface: v2.00
>eth0: forcedeth.c: subsystem: 01565:2501 bound to 0000:00:0a.0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>parport0: Printer, Hewlett-Packard HP LaserJet 6L
>fw_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.0
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c9)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>usbcore: registered new interface driver snd-usb-audio
>fw_core: created new fw device fw0 (0 config rom retries)
>cannot find the slot for index 0 (range 0-0), error: -16
>Intel ICH: probe of 0000:00:04.0 failed with error -12
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>No dock devices found.
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>usb 2-6: reset high speed USB device using ehci_hcd and address 6
>EXT3 FS on sda10, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 247224: 158658 | 158659 | 158660 | 158661 | 158686 | 158687