Attachment 158717 Details for Bug 247348 – Output of "dmesg" after booting system with inserted "USB" stick

Output of "dmesg" after booting system with inserted "USB" stick

dmesg-2.6.21-1.3228.fc7.txt (text/plain), 15.38 KB, created by Joachim Frieben on 2007-07-07 13:26:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Frieben

Created: 2007-07-07 13:26:13 UTC

Size: 15.38 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 15:37:31 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000000100000 size: 000000001ff00000 end: 0000000020000000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000fec00000 size: 0000000000009000 end: 00000000fec09000 type: 2
>copy_e820_map() start: 00000000ffe80000 size: 0000000000180000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
> BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved)
> BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>512MB LOWMEM available.
>found SMP MP-table at 000f7ef0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131072) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131072
>  HighMem    131072 ->   131072
>early_node_map[1] active PFN ranges
>    0:        0 ->   131072
>On node 0 totalpages: 131072
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 992 pages used for memmap
>  Normal zone: 125984 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.0 present.
>Using APIC driver default
>ACPI: BIOS age (1998) fails cutoff (1999), acpi=force is required to enable ACPI
>ACPI: Disabling ACPI support
>Intel MultiProcessor Specification v1.1
>    Virtual Wire compatibility mode.
>OEM ID: INTEL    Product ID: PR440FX      APIC at: 0xFEC08000
>Processor #0 6:3 APIC version 17
>Processor #12 6:3 APIC version 17
>I/O APIC #13 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Built 1 zonelists.  Total pages: 130048
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fec08000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 331.123 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511256k/524288k available (2066k kernel code, 12392k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604bc2 - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604bc2   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 662.80 BogoMIPS (lpj=331403)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>CPU0: Intel Pentium II (Klamath) stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/12 eip 3000
>CPU 1 irqstacks, hard=c077d000 soft=c075d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 662.15 BogoMIPS (lpj=331079)
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Pentium II (Klamath) stepping 02
>Total of 2 processors activated (1324.96 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=-1 pin1=-1 apic2=0 pin2=0
>...trying to set up timer (IRQ0) through the 8259A ... 
>..... (found pin 0) ...works.
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=10540
>Time: 11:41:43  Date: 06/03/107
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=0
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Firmware left 0000:00:06.0 e100 interrupts enabled, disabling
>Boot video device is 0000:00:0b.0
>PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:09.0[A] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 17
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>NET: Registered protocol family 2
>IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
>TCP established hash table entries: 65536 (order: 7, 786432 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3554k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1183462904.361:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 949CEA51B56F22EC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: Card 'CS4236B Audio'
>isapnp: 1 Plug & Play card detected total
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>0000:00:0f.0: ttyS2 at I/O 0xfff0 (irq = 17) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:527:680
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>usb 1-2: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec aic7880 Ultra SCSI adapter>
>        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
>scsi 0:0:0:0: Direct-Access     QUANTUM  ATLAS10K3_36_WLS 020K PQ: 0 ANSI: 3
>scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
> target0:0:0: Beginning Domain Validation
> target0:0:0: wide asynchronous
> target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
> target0:0:0: Domain Validation skipping write tests
> target0:0:0: Ending Domain Validation
>libata version 2.20 loaded.
>ata_piix 0000:00:07.1: version 2.10ac1
>ata1: PATA max MWDMA2 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max MWDMA2 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi1 : ata_piix
>ata1.00: ATAPI, max UDMA/33
>ata1.00: configured for MWDMA2
>scsi2 : ata_piix
>scsi: waiting for bus probes to complete ...
>SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
>sda: Write Protect is off
>sda: Mode Sense: e5 00 10 08
>SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
>SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
>sda: Write Protect is off
>sda: Mode Sense: e5 00 10 08
>SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            SONY     DVD-ROM DDU1612  DYS3 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1822 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 68296 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1183462929.357:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>pnp: Device 00:01.01 activated.
>gameport: NS558 PnP Gameport is pnp00:01.01/gameport0, io 0x200, speed 727kHz
>input: PC Speaker as /class/input/input3
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>e100: eth0: e100_probe: addr 0xffbef000, irq 18, MAC addr 00:A0:C9:49:74:68
>loop: loaded (max 8 devices)
>parport0: PC-style at 0x378 [PCSPP]
>parport0: Printer, Hewlett-Packard HP LaserJet 4000 Series
>lp0: using parport0 (polling).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>audit(1183455752.824:3): avc:  denied  { search } for  pid=948 comm="rhgb" name="/" dev=dm-1 ino=2 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir
>audit(1183455752.824:4): avc:  denied  { dac_override } for  pid=948 comm="rhgb" capability=1 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:system_r:rhgb_t:s0 tclass=capability
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>Adding 2097144k swap on /dev/VolGroup00/LogVol03.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4096 buckets, 32768 max)
>audit(1183455778.820:5): audit_pid=1382 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>pnp: Device 00:01.00 activated.
>pnp: Device 00:01.02 activated.
>pnp: Device 00:01.03 activated.
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 247348: 158717 | 158718 | 158719