Attachment 158723 Details for Bug 247296 – A later dmesg log file, this time with timeout/retry message on the drive

A later dmesg log file, this time with timeout/retry message on the drive

dmesg2.log (text/plain), 37.22 KB, created by Roger Cowles on 2007-07-07 18:06:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roger Cowles

Created: 2007-07-07 18:06:19 UTC

Size: 37.22 KB

patch

obsolete

>Linux version 2.6.20-1.2962.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Jun 19 18:24:12 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001def0000 end: 000000001dff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001dff0000 size: 0000000000008000 end: 000000001dff8000 type: 3
>copy_e820_map() start: 000000001dff8000 size: 0000000000008000 end: 000000001e000000 type: 4
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
> BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
> BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>479MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122864) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122864
>  HighMem    122864 ->   122864
>early_node_map[1] active PFN ranges
>    0:        0 ->   122864
>On node 0 totalpages: 122864
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 1159 pages used for memmap
>  Normal zone: 117609 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa270
>ACPI: RSDT (v001 AMIINT VIA_P6   0x00000010 MSFT 0x00000097) @ 0x1dff0000
>ACPI: FADT (v001 AMIINT VIA_P6   0x00000011 MSFT 0x00000097) @ 0x1dff0030
>ACPI: DSDT (v001    VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
>Detected 796.179 MHz processor.
>Built 1 zonelists.  Total pages: 121665
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>No local APIC present or hardware disabled
>mapped APIC to ffffd000 (014bc000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079a000 soft=c077a000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 478636k/491456k available (2157k kernel code, 12268k reserved, 1127k data, 232k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddff0000   ( 479 MB)
>      .init : 0xc073b000 - 0xc0775000   ( 232 kB)
>      .data : 0xc061b632 - 0xc0735494   (1127 kB)
>      .text : 0xc0400000 - 0xc061b632   (2157 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1593.75 BogoMIPS (lpj=796879)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 00803035 80803035 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
>CPU: L2 Cache: 64K (32 bytes/line)
>CPU: After all inits, caps: 00803135 80803035 00000000 00000000 00000000 00000000 00000000
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0c20)
>CPU0: Centaur VIA Samuel 2 stepping 03
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by vt8235 PM
>PCI quirk: region 0400-040f claimed by vt8235 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ddd00000-dfdfffff
>  PREFETCH window: d5c00000-ddbfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2257k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1183736128.463:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 514EF64DC05D34A7
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: Processor [CPU1] (supports 16 throttling states)
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA CLE266 chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: Unable to derive IRQ for device 0000:00:11.1
>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: SAMSUNG SV1203N, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-ST GCE-8523B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63<6>hda: hw_config=600b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 819k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 10, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 5, io mem 0xdffffd00
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:09.0: version 2.0
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ata1: SATA max UDMA/100 cmd 0xDE834E80 ctl 0xDE834E8A bmdma 0xDE834E00 irq 10
>ata2: SATA max UDMA/100 cmd 0xDE834EC0 ctl 0xDE834ECA bmdma 0xDE834E08 irq 10
>scsi0 : sata_sil
>ata1: SATA link down (SStatus 0 SControl 310)
>scsi1 : sata_sil
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: unknown partition table
>sd 1:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1183736137.219:2): selinux=0 auid=4294967295
>hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport0: Printer, EPSON Stylus COLOR 600
>input: PC Speaker as /class/input/input3
>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0xdffffc00, 00:16:ec:92:fc:9a, IRQ 11.
>eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
>NET: Registered protocol family 23
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 983032k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:983032k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3839 buckets, 30712 max)
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>hda: drive_cmd: error=0x04 { DriveStatusError }
>ide: failed opcode was: 0xb0
>mtrr: no MTRR for d8000000,1000000 found
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized via 2.10.0 20060529 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager.
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: unknown partition table
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 4-4: new high speed USB device using ehci_hcd and address 2
>usb 4-4: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi 2:0:0:0: Direct-Access     Maxtor 6 L200P0           0000 PQ: 0 ANSI: 0
>SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 27 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 27 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: Attached scsi disk sdb
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>fuse init (API version 7.8)
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:c8:59:aa:7d/00:01:02:00:00/e0 tag 0 cdb 0x0 data 233472 out
>         res 51/04:47:da:ab:7d/00:00:02:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:69:b9:17/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:c0:a9:ba:17/00:02:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:a9:a4:44/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:f0:b9:a4:44/00:03:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:b9:57:6a/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:30:89:59:6a/00:02:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd ca/00:f8:e9:cd:6b/00:00:00:00:00/ed tag 0 cdb 0x0 data 126976 out
>         res 51/04:d7:0a:ce:6b/00:02:0d:00:00/ed Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:61:86:e3/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:90:d1:88:e3/00:01:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x7c0001)
>ata2.00: cmd 35/00:00:19:7c:ef/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:01:18:80:ef/00:00:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:21:31:f3/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:31:f0:34:f3/00:00:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:d9:a2:fb/00:04:0d:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:e0:f9:a3:fb/00:02:0d:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:91:2c:5b/00:04:0e:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:f0:a1:2e:5b/00:01:0e:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:d1:ad:50/00:04:0e:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:60:71:b0:50/00:01:0e:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:91:f0:1b/00:04:0f:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:4f:42:f2:1b/00:02:0f:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:39:90:58/00:04:0f:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:30:09:93:58/00:01:0f:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:79:1d:2b/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:f0:89:1d:2b/00:03:06:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:a9:81:51/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:bf:ea:82:51/00:02:06:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:b1:e1:58/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:50:61:e3:58/00:02:06:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:a8:49:ca:c0/00:03:06:00:00/e0 tag 0 cdb 0x0 data 479232 out
>         res 51/04:c9:28:cd:c0/00:00:06:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:d1:75:ea/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:d0:01:79:ea/00:00:06:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:19:df:3e/00:04:07:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:20:f9:df:3e/00:03:07:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:09:fb:5c/00:04:07:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:e0:29:fe:5c/00:00:07:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:59:ff:68/00:04:07:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:4f:0a:02:69/00:01:07:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:09:9c:09/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:30:d9:9d:09/00:02:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:71:1e:2b/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:f0:81:21:2b/00:00:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:39:37:3b/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:f0:49:3a:3b/00:00:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:a1:cd:db/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:20:81:d0:db/00:01:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:d9:b3:e1/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:60:79:b4:e1/00:03:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:69:9a:e8/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:30:39:9d:e8/00:01:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:a1:ca:f2/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:50:51:cd:f2/00:01:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:39:62:f4/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:e0:59:62:f4/00:03:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:c9:dd:fb/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:2f:9a:de:fb/00:03:08:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:b9:91:01/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:90:29:93:01/00:02:09:00:00/e0 Emask 0x1 (device error)
>ata2.00: configured for UDMA/100
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to UDMA/66
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:59:aa:1c/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:ff:5a:ac:1c/00:01:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for UDMA/66
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to UDMA/44
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:b9:0b:21/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:d0:e9:0c:21/00:02:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for UDMA/44
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to UDMA/33
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:39:52:2e/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:70:c9:52:2e/00:03:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for UDMA/33
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to UDMA/25
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:11:b6:a2/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:bf:52:b7:a2/00:02:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for UDMA/25
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to UDMA/16
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:f1:22:a9/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:c0:31:26:a9/00:00:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for UDMA/16
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to PIO4
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: (BMDMA2 stat 0x750001)
>ata2.00: cmd 35/00:00:a1:2c:c1/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:b0:f1:2f:c1/00:00:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for PIO4
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: limiting speed to PIO3
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2
>ata2.00: cmd 39/00:00:49:73:d3/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>         res 51/04:70:d9:74:d3/00:02:09:00:00/e0 Emask 0x1 (device error)
>ata2: soft resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ATA: abnormal status 0xD1 on port 0xDE834EC7
>ata2.00: qc timeout (cmd 0xec)
>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.00: revalidation failed (errno=-5)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: hard resetting port
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: configured for PIO3
>ata2: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Actions: View

Attachments on bug 247296: 158684 | 158723 | 158735 | 158736 | 158737