Attachment 158791 Details for Bug 247499 – Output of "lspci -vv" after booting with "noapic"

Output of "lspci -vv" after booting with "noapic"

lspci-2.6.21-1.3255.fc7.noapic.txt (text/plain), 5.63 KB, created by Joachim Frieben on 2007-07-09 17:33:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Frieben

Created: 2007-07-09 17:33:26 UTC

Size: 5.63 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
>	Latency: 32
>
>00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (2000ns min, 14000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at ffbee000 (32-bit, prefetchable) [size=4K]
>	Region 1: I/O ports at ff00 [size=32]
>	Region 2: Memory at ff800000 (32-bit, non-prefetchable) [size=1M]
>	[virtual] Expansion ROM at 30000000 [disabled] [size=1M]
>
>00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master])
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at ffa0 [size=16]
>
>00:09.0 SCSI storage controller: Adaptec AIC-7880U
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at f800 [disabled] [size=256]
>	Region 1: Memory at ffbeb000 (32-bit, non-prefetchable) [size=4K]
>	[virtual] Expansion ROM at 30120000 [disabled] [size=64K]
>
>00:0b.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200] (prog-if 00 [VGA])
>	Subsystem: ATI Technologies Inc Radeon AIW
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>	Region 1: I/O ports at fc00 [size=256]
>	Region 2: Memory at ffb00000 (32-bit, non-prefetchable) [size=512K]
>	[virtual] Expansion ROM at 30100000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0f.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])
>	Subsystem: 3Com Corp, Modem Division USR 56k Internal FAX Modem (Model 5610)
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at fff0 [size=8]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>00:11.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
>	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at ff40 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>00:11.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
>	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at ff80 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI])
>	Subsystem: VIA Technologies, Inc. USB 2.0
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 11
>	Region 0: Memory at ffbefc00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 247499: 158787 | 158788 | 158789 | 158790 | 158791 | 158830 | 202121 | 202131