Attachment 158792 Details for Bug 247468 – here is my /root/scsconfig.log

here is my /root/scsconfig.log

scsconfig.log (text/plain), 75.83 KB, created by Valent Turkovic on 2007-07-09 17:42:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Valent Turkovic

Created: 2007-07-09 17:42:26 UTC

Size: 75.83 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Mon Jul  9 19:40:13 CEST 2007
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
>00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
>00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
>02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
>02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
>02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
>10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:27a0 (rev 03)
>	Subsystem: 103c:30a2
>	Flags: bus master, fast devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])
>	Subsystem: 103c:30a2
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at f4400000 (32-bit, non-prefetchable) [size=512K]
>	I/O ports at 4000 [size=8]
>	Memory at e0000000 (32-bit, prefetchable) [size=256M]
>	Memory at f4480000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [d0] Power Management version 2
>
>00:02.1 0380: 8086:27a6 (rev 03)
>	Subsystem: 103c:30a2
>	Flags: bus master, fast devsel, latency 0
>	Memory at f4500000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 2
>
>00:1b.0 0403: 8086:27d8 (rev 01)
>	Subsystem: 103c:30a2
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at f4580000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Express Unknown type IRQ 0
>
>00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [90] Subsystem: 103c:30a2
>	Capabilities: [a0] Power Management version 2
>
>00:1c.1 0604: 8086:27d2 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
>	Memory behind bridge: f4000000-f40fffff
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [90] Subsystem: 103c:30a2
>	Capabilities: [a0] Power Management version 2
>
>00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	I/O ports at 4020 [size=32]
>
>00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 17
>	I/O ports at 4040 [size=32]
>
>00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	I/O ports at 4060 [size=32]
>
>00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 20
>	I/O ports at 4080 [size=32]
>
>00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	Memory at f4584000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port
>
>00:1e.0 0604: 8086:2448 (rev e1) (prog-if 01 [Subtractive decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: f4100000-f43fffff
>	Prefetchable memory behind bridge: 0000000060000000-0000000063ffffff
>	Capabilities: [50] Subsystem: 103c:30a2
>
>00:1f.0 0601: 8086:27b9 (rev 01)
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 0, IRQ 16
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at 40a0 [size=16]
>
>00:1f.2 0106: 8086:27c5 (rev 01) (prog-if 01 [AHCI 1.0])
>	Subsystem: 103c:30a2
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 221
>	I/O ports at 13f0 [size=8]
>	I/O ports at 15f4 [size=4]
>	I/O ports at 1370 [size=8]
>	I/O ports at 1574 [size=4]
>	I/O ports at 40d0 [size=16]
>	Memory at f4585000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>	Capabilities: [70] Power Management version 2
>
>02:06.0 0607: 104c:8039
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 168, IRQ 18
>	Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: 60000000-63fff000 (prefetchable)
>	Memory window 1: 64000000-67fff000
>	I/O window 0: 00002000-000020ff
>	I/O window 1: 00002400-000024ff
>	16-bit legacy interface ports at 0001
>
>02:06.1 0c00: 104c:803a (prog-if 10 [OHCI])
>	Subsystem: 103c:30a2
>	Flags: bus master, medium devsel, latency 64, IRQ 20
>	Memory at f4101000 (32-bit, non-prefetchable) [size=2K]
>	Memory at f4104000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>
>02:0e.0 0200: 14e4:170c (rev 02)
>	Subsystem: 103c:30a2
>	Flags: bus master, fast devsel, latency 64, IRQ 16
>	Memory at f4108000 (32-bit, non-prefetchable) [size=8K]
>	Capabilities: [40] Power Management version 2
>
>10:00.0 0280: 8086:4222 (rev 02)
>	Subsystem: 103c:135c
>	Flags: bus master, fast devsel, latency 0, IRQ 17
>	Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>	Capabilities: [e0] Express Legacy Endpoint IRQ 0
>
>------- lsmod --------
>Module                  Size  Used by
>i915                   27209  2 
>drm                    81421  3 i915
>autofs4                25693  2 
>i2c_dev                11717  0 
>i2c_core               28369  1 i2c_dev
>hidp                   27081  2 
>nls_utf8                6209  4 
>cifs                  215557  4 
>rfcomm                 45417  0 
>l2cap                  31441  10 hidp,rfcomm
>bluetooth              59845  5 hidp,rfcomm,l2cap
>sunrpc                167485  1 
>nf_conntrack_netbios_ns     7233  0 
>nf_conntrack_ipv4      15177  2 
>xt_state                6593  2 
>nf_conntrack           64585  3 nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_state
>nfnetlink              10073  2 nf_conntrack_ipv4,nf_conntrack
>xt_tcpudp               7233  4 
>ipt_REJECT              8641  2 
>iptable_filter          7105  1 
>ip_tables              16517  1 iptable_filter
>x_tables               18901  4 xt_state,xt_tcpudp,ipt_REJECT,ip_tables
>cpufreq_ondemand       12109  1 
>acpi_cpufreq           14409  1 
>vfat                   16321  1 
>fat                    53877  1 vfat
>dm_mirror              26585  0 
>dm_multipath           22353  0 
>dm_mod                 59049  2 dm_mirror,dm_multipath
>video                  21065  0 
>sbs                    22993  0 
>button                 12241  0 
>dock                   14505  0 
>battery                14277  0 
>ac                      9413  0 
>ipv6                  282149  25 
>parport_pc             31333  0 
>lp                     16937  0 
>parport                39337  2 parport_pc,lp
>loop                   21717  0 
>snd_hda_intel         246057  2 
>snd_seq_dummy           7877  0 
>snd_seq_oss            34513  0 
>snd_seq_midi_event     11337  1 snd_seq_oss
>snd_seq                52505  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>iwl3945               157781  0 
>snd_seq_device         12373  3 snd_seq_dummy,snd_seq_oss,snd_seq
>firewire_ohci          20937  0 
>b44                    30425  0 
>mac80211              148993  1 iwl3945
>firewire_core          44425  1 firewire_ohci
>ssb                    36053  1 b44
>iTCO_wdt               15121  0 
>crc_itu_t               6337  1 firewire_core
>snd_pcm_oss            44257  0 
>usblp                  18129  0 
>cfg80211               12505  1 mac80211
>mii                     9409  1 b44
>iTCO_vendor_support     7877  1 iTCO_wdt
>snd_mixer_oss          19913  2 snd_pcm_oss
>ata_generic            11717  0 
>snd_pcm                77165  2 snd_hda_intel,snd_pcm_oss
>rtc_cmos               12257  0 
>snd_timer              25821  2 snd_seq,snd_pcm
>serio_raw              11204  0 
>snd                    55557  10 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore              11937  2 snd
>snd_page_alloc         13897  2 snd_hda_intel,snd_pcm
>joydev                 13825  0 
>sr_mod                 21093  0 
>cdrom                  36961  1 sr_mod
>sg                     37733  0 
>ata_piix               18757  0 
>ahci                   25669  5 
>libata                121041  3 ata_generic,ata_piix,ahci
>sd_mod                 31809  6 
>scsi_mod              143917  4 sr_mod,sg,libata,sd_mod
>ext3                  126585  3 
>jbd                    61345  1 ext3
>mbcache                12741  1 ext3
>ehci_hcd               36053  0 
>ohci_hcd               24525  0 
>uhci_hcd               27993  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 b44
>alias scsi_hostadapter ata_piix
>alias scsi_hostadapter1 ahci
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0  
>options snd-hda-intel index=0  
>
>------- /etc/asound.conf --------
>
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 63
>  Mono:
>  Front Left: Playback 63 [100%] [on]
>  Front Right: Playback 63 [100%] [on]
>Simple mixer control 'PCM',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Mono:
>  Front Left: Playback 16 [52%] [-10.50dB] [on]
>  Front Right: Playback 16 [52%] [-10.50dB] [on]
>Simple mixer control 'Mic',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [off]
>Simple mixer control 'Mic Boost',0
>  Capabilities: volume
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: 0 - 3
>  Front Left: 0 [0%]
>  Front Right: 0 [0%]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 15
>  Front Left: Capture 8 [53%] [12.00dB] [on]
>  Front Right: Capture 8 [53%] [12.00dB] [on]
>Simple mixer control 'Mix',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [on]
>Simple mixer control 'Caller ID',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>Simple mixer control 'Docking-Station',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [off]
>Simple mixer control 'Internal Mic Boost',0
>  Capabilities: volume
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: 0 - 3
>  Front Left: 0 [0%]
>  Front Right: 0 [0%]
>Simple mixer control 'Off-hook',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-0.4.rc3.fc7
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-0.7.rc2.fc7
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
>00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: intel-rng
>desc: "Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge"
>vendorId: 8086
>deviceId: 27b9
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801 Mobile PCI Bridge"
>vendorId: 8086
>deviceId: 2448
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 2"
>vendorId: 8086
>deviceId: 27d2
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  1
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 1"
>vendorId: 8086
>deviceId: 27d0
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "ALCOR Generic USB Hub"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 1
>usbport: 1
>usbdev: 3
>vendorId: 058f
>deviceId: 9254
>usbmfr: ALCOR
>usbprod: Generic USB Hub
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub"
>vendorId: 8086
>deviceId: 27a0
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Lid Switch"
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3244.fc8 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3244.fc8 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3244.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3244.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3244.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3244.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3244.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3244.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3244.fc8 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3244.fc8 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0103"
>deviceId: PNP0103
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a08"
>deviceId: PNP0a08
>compat: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: rtc-cmos
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "SYN010d"
>deviceId: SYN010d
>compat: SYN0100,SYN0002,PNP0f13
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Sleep Button (CM)"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: MOUSE
>bus: USB
>detached: 0
>device: input/mice
>driver: genericwheelusb
>desc: "Microsoft Microsoft USB Wireless Mouse"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 2
>usblevel: 2
>usbport: 0
>usbdev: 4
>vendorId: 045e
>deviceId: 00b9
>usbmfr: Microsoft
>usbprod: Microsoft USB Wireless Mouse
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: synaptics
>desc: "SynPS/2 Synaptics TouchPad"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller"
>vendorId: 8086
>deviceId: 27d8
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1b
>pcifn:  0
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "TSSTcorp CD/DVDW TS-L632D"
>host: 4
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>desc: "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
>vendorId: 8086
>deviceId: 27a6
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  1
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: intelfb
>desc: "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
>video.xdriver: intel
>vendorId: 8086
>deviceId: 27a2
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA ST9120822AS"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: PRINTER
>bus: USB
>detached: 0
>driver: usblp
>desc: "Canon iP3000"
>usbclass: 7
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 2
>usblevel: 2
>usbport: 2
>usbdev: 5
>vendorId: 04a9
>deviceId: 1094
>usbmfr: Canon
>usbprod: iP3000
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller"
>vendorId: 8086
>deviceId: 27cc
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  7
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4"
>vendorId: 8086
>deviceId: 27cb
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3"
>vendorId: 8086
>deviceId: 27ca
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2"
>vendorId: 8086
>deviceId: 27c9
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1"
>vendorId: 8086
>deviceId: 27c8
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  0
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "Texas Instruments PCIxx12 Cardbus Controller"
>vendorId: 104c
>deviceId: 8039
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  6
>pcifn:  0
>-
>class: FIREWIRE
>bus: PCI
>detached: 0
>driver: firewire-ohci
>desc: "Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller"
>vendorId: 104c
>deviceId: 803a
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  6
>pcifn:  1
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_generic
>desc: "Intel Corporation 82801G (ICH7 Family) IDE Controller"
>vendorId: 8086
>deviceId: 27df
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  1
>-
>class: SATA
>bus: PCI
>detached: 0
>driver: ahci
>desc: "Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller"
>vendorId: 8086
>deviceId: 27c5
>subVendorId: 103c
>subDeviceId: 30a2
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  2
>
>------- dmesg --------
>Linux version 2.6.21-1.3244.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Mon Jul 2 13:03:34 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005f7d0000 (usable)
> BIOS-e820: 000000005f7d0000 - 000000005f7e5600 (reserved)
> BIOS-e820: 000000005f7e5600 - 000000005f7f8000 (ACPI NVS)
> BIOS-e820: 000000005f7f8000 - 000000005f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>631MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 391120) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   391120
>early_node_map[1] active PFN ranges
>    0:        0 ->   391120
>On node 0 totalpages: 391120
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 2053 pages used for memmap
>  HighMem zone: 159691 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7BD0, 0024 (r2 HP    )
>ACPI: XSDT 5F7E57C4, 0074 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 5F7E5684, 00F4 (r4 HP     30A2            3 HP          1)
>ACPI: DSDT 5F7E5AC0, F9BB (r1 HP       nx7400    10000 MSFT  100000E)
>ACPI: FACS 5F7F7E80, 0040
>ACPI: SLIC 5F7E5838, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 5F7E59B0, 0038 (r1 HP     30A2            1 HP          1)
>ACPI: APIC 5F7E59E8, 0068 (r1 HP     30A2            1 HP          1)
>ACPI: MCFG 5F7E5A50, 003C (r1 HP     30A2            1 HP          1)
>ACPI: TCPA 5F7E5A8C, 0032 (r2 HP     30A2            1 HP          1)
>ACPI: SSDT 5F7F547B, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT 5F7F5FB4, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 5F7F6213, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 5F7F62B9, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 60000000 (gap: 5f800000:9f400000)
>Built 1 zonelists.  Total pages: 386155
>Kernel command line: ro root=LABEL=/12 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b6000 soft=c0796000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1828.864 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 992 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1533008k/1564480k available (2199k kernel code, 30180k reserved, 1166k data, 264k init, 646976k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074f000 - 0xc0791000   ( 264 kB)
>      .data : 0xc0625e1e - 0xc0749964   (1166 kB)
>      .text : 0xc0400000 - 0xc0625e1e   (2199 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3661.42 BogoMIPS (lpj=1830713)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07b7000 soft=c0797000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3657.50 BogoMIPS (lpj=1828753)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>Total of 2 processors activated (7318.93 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2880 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Time: 19:24:35  Date: 06/09/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C002] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C104._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C114._PRT]
>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C112] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C113] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C21D] (on)
>ACPI: Power Resource [C226] (off)
>ACPI: Power Resource [C320] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>ACPI: Power Resource [C323] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x5f7fffff could not be reserved
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>Switched to high resolution mode on CPU 1
>pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0b: iomem range 0xd2800-0xd3fff has been reserved
>pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f4000000-f40fffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 60000000-63ffffff
>  MEM window: 64000000-67ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: f4100000-f43fffff
>  PREFETCH window: 60000000-63ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2840k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1184009074.542:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3650279ADC9E5F91
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C324] to D3
>ACPI: Transitioning device [C324] to D3
>ACPI: Fan [C324] (off)
>ACPI: Transitioning device [C325] to D3
>ACPI: Transitioning device [C325] to D3
>ACPI: Fan [C325] (off)
>ACPI: Transitioning device [C326] to D3
>ACPI: Transitioning device [C326] to D3
>ACPI: Fan [C326] (off)
>ACPI: Transitioning device [C327] to D3
>ACPI: Transitioning device [C327] to D3
>ACPI: Fan [C327] (off)
>ACPI: SSDT 5F7F5869, 01FB (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 5F7F5AE9, 04CB (r1 HP      Cpu0Cst     3001 INTL 20060317)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 5F7F57A1, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 5F7F5A64, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [TZ0] (50 C)
>ACPI: Thermal Zone [TZ1] (45 C)
>ACPI: Thermal Zone [TZ2] (32 C)
>ACPI: Thermal Zone [TZ3] (30 C)
>ACPI: Thermal Zone [TZ4] (73 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
>pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
>Clocksource tsc unstable (delta = -490693255 ns)
>PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:72:445
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 890k
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x00004080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf4584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.2
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xf886c100 ctl 0x00000000 bmdma 0x00000000 irq 0
>ata2: SATA max UDMA/133 cmd 0xf886c180 ctl 0x00000000 bmdma 0x00000000 irq 0
>ata3: SATA max UDMA/133 cmd 0xf886c200 ctl 0x00000000 bmdma 0x00000000 irq 0
>ata4: SATA max UDMA/133 cmd 0xf886c280 ctl 0x00000000 bmdma 0x00000000 irq 0
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>ata2: SATA link down (SStatus 0 SControl 0)
>usb 2-2.1: new low speed USB device using uhci_hcd and address 4
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft USB Wireless Mouse as /class/input/input3
>input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.1-2.1
>ata3: SATA link down (SStatus 0 SControl 0)
>usb 2-2.3: new full speed USB device using uhci_hcd and address 5
>usb 2-2.3: configuration #1 chosen from 1 choice
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140a0 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140a8 irq 15
>ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH15, max MWDMA2
>ata5.00: configured for MWDMA2
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1823 types, 79 bools, 1 sens, 1024 cats
>security:  61 classes, 68327 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda10, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1184009089.985:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>iTCO_vendor_support: vendor-support=0
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1094
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
>ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
>ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
>ssb: Unsupported SPROM revision 16 detected. Will extract v1
>ssb: Switching to PCI core, index 2
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
>b44.c:v2.0
>ssb: Switching to Fast Ethernet core, index 0
>ssb: Switching to PCI core, index 2
>ssb: Switching to Fast Ethernet core, index 0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:4a:d2:5d
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.25kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Radio disabled by HW RF Kill switch
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries)
>floppy0: no floppy controllers found
>loop: module loaded
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: AC Adapter [C1BC] (off-line)
>ACPI: Battery Slot [C1BE] (battery present)
>ACPI: Battery Slot [C1BD] (battery absent)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [C243]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [C23C]
>ACPI: Video Device [C085] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda10, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda11, type ext3), uses xattr
>SELinux: initialized (dev sda2, type vfat), uses genfs_contexts
>Adding 1534168k swap on /dev/sda5.  Priority:-1 extents:1 across:1534168k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1184001926.352:3): audit_pid=2040 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>CIFS: Unknown mount option bg
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>CIFS: Unknown mount option bg
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>CIFS: Unknown mount option bg
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>CIFS: Unknown mount option bg
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>i2c /dev entries driver
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>application nasd uses obsolete OSS audio interface
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>usb 2-2.1: USB disconnect, address 4
>usb 2-2.1: new low speed USB device using uhci_hcd and address 6
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 10
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 14
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 18
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 22
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 26
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 30
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 34
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 38
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 42
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 46
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 50
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 54
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 58
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 62
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 66
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 70
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 74
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 78
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 82
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 86
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 90
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 94
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 98
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 102
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 106
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 110
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 114
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 118
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 122
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 126
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 6
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 10
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 14
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 18
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 22
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 26
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 30
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 34
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 38
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 42
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 46
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 50
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 54
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 58
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 62
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 66
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 70
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 74
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 78
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 82
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 86
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 90
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 94
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 98
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 102
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 106
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 110
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 114
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 118
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 122
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 126
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 6
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 10
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 14
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 18
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 22
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 26
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 30
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 34
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft USB Wireless Mouse as /class/input/input7
>input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.1-2.1
>usb 2-2.1: USB disconnect, address 34
>usb 2-2.1: new low speed USB device using uhci_hcd and address 35
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 39
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 43
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 47
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 51
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 55
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 59
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 63
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 67
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 71
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-2.1: new low speed USB device using uhci_hcd and address 75
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>hub 2-2:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft USB Wireless Mouse as /class/input/input8
>input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.2-2
>hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
>usb 3-2: USB disconnect, address 2
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: device descriptor read/64, error -71
>usb 3-2: device descriptor read/64, error -71
>usb 3-2: new low speed USB device using uhci_hcd and address 4
>usb 3-2: device descriptor read/64, error -71
>usb 3-2: device descriptor read/64, error -71
>usb 3-2: new low speed USB device using uhci_hcd and address 5
>usb 3-2: device not accepting address 5, error -71
>usb 3-2: new low speed USB device using uhci_hcd and address 6
>usb 3-2: device not accepting address 6, error -71
>usb 3-2: new low speed USB device using uhci_hcd and address 7
>usb 3-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft USB Wireless Mouse as /class/input/input9
>input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.2-2
>

Actions: View

Attachments on bug 247468: 158792 | 158800 | 158808 | 199901 | 199911 | 200191 | 219021 | 246821