Attachment 158869 Details for Bug 247644 – output of dmesg

output of dmesg

dmesg.txt (text/plain), 29.91 KB, created by Thomas Antony on 2007-07-10 17:07:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Antony

Created: 2007-07-10 17:07:54 UTC

Size: 29.91 KB

patch

obsolete

>Linux version 2.6.20-2925.11.fc7xen (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Jun 11 16:18:59 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol01 rhgb quiet
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000001f0411000 (usable)
>Entering add_active_range(0, 0, 2032657) 0 entries of 256 used
>end_pfn_map = 2032657
>Entering add_active_range(0, 0, 2032657) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->  2032657
>  DMA32     2032657 ->  2032657
>  Normal    2032657 ->  2032657
>early_node_map[1] active PFN ranges
>    0:        0 ->  2032657
>On node 0 totalpages: 2032657
>  DMA zone: 27790 pages used for memmap
>  DMA zone: 1099 pages reserved
>  DMA zone: 2003768 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>DMI 2.4 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000f2620
>ACPI: XSDT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f26a0
>ACPI: FADT (v003 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f27a8
>ACPI: MADT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f289c
>ACPI: SPCR (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f297d
>ACPI: HPET (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f29cd
>ACPI: MCFG (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f2a05
>ACPI: DSDT (v001 DELL   PE_SC3   0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xfec81000] gsi_base[64])
>IOAPIC[1]: apic_id 5, address 0xfec81000, GSI 64-87
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>PERCPU: Allocating 26368 bytes of per cpu data
>Built 1 zonelists.  Total pages: 2003768
>Kernel command line: ro root=/dev/VolGroup00/LogVol01 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 1995.068 MHz processor.
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0xffff88000ab67000 - 0xffff88000eb67000
> Address size: 30 bits
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 7885428k/8130628k available (2207k kernel code, 236360k reserved, 1347k data, 192k init)
>Calibrating delay using timer specific routine.. 4987.38 BogoMIPS (lpj=9974770)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Brought up 4 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=768 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=1040 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1936 bytes
>Initializing CPU#3
>migration_cost=16
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:10:0d.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
>ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
>ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0x800-0x87f could not be reserved
>pnp: 00:08: ioport range 0x880-0x8bf has been reserved
>pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
>pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
>pnp: 00:08: ioport range 0xca9-0xcab has been reserved
>pnp: 00:08: ioport range 0xcad-0xcaf has been reserved
>pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
>pnp: 00:09: ioport range 0xcac-0xcac has been reserved
>PCI: Bridge: 0000:08:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: f2000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: fc400000-fc5fffff
>  PREFETCH window: d8000000-d80fffff
>PCI: Bridge: 0000:01:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: fc300000-fc5fffff
>  PREFETCH window: d8000000-d80fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: f8000000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f8000000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fc100000-fc2fffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>PCI: Setting latency timer of device 0000:08:00.0 to 64
>ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:07:01.0 to 64
>PCI: Setting latency timer of device 0000:06:00.3 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>PCI: Setting latency timer of device 0000:01:00.2 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 9652k freed
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1184092047.412:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>Allocate Port Service[0000:06:00.0:pcie10]
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:07:00.0:pcie20]
>PCI: Setting latency timer of device 0000:07:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:07:01.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Write protecting the kernel read-only data: 938k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
>megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 78
>megasas: FW now in Ready state
>scsi0 : LSI Logic SAS based MegaRAID driver
>scsi 0:0:0:0: Direct-Access     SEAGATE  ST373455SS       S513 PQ: 0 ANSI: 5
>scsi 0:0:1:0: Direct-Access     SEAGATE  ST373455SS       S513 PQ: 0 ANSI: 5
>scsi 0:0:2:0: Direct-Access     SEAGATE  ST3146855SS      S513 PQ: 0 ANSI: 5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>scsi 0:0:3:0: Direct-Access     SEAGATE  ST3146855SS      S513 PQ: 0 ANSI: 5
>scsi 0:0:4:0: Direct-Access     SEAGATE  ST3146855SS      S513 PQ: 0 ANSI: 5
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.1: version 2.00ac7
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
>scsi1 : ata_piix
>scsi 0:0:8:0: Enclosure         DP       BACKPLANE        1.05 PQ: 0 ANSI: 5
>scsi 0:2:0:0: Direct-Access     DELL     PERC 5/i         1.03 PQ: 0 ANSI: 5
>scsi 0:2:1:0: Direct-Access     DELL     PERC 5/i         1.03 PQ: 0 ANSI: 5
>SCSI device sda: 142082048 512-byte hdwr sectors (72746 MB)
>sda: Write Protect is off
>sda: Mode Sense: 1f 00 10 08
>SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
>SCSI device sda: 142082048 512-byte hdwr sectors (72746 MB)
>sda: Write Protect is off
>sda: Mode Sense: 1f 00 10 08
>SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:2:0:0: Attached scsi disk sda
>SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 1f 00 10 08
>SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
>SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 1f 00 10 08
>SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
> sdb: sdb1
>sd 0:2:1:0: Attached scsi disk sdb
>usb 4-5: new high speed USB device using ehci_hcd and address 2
>ata1.00: ATAPI, max UDMA/33
>usb 4-5: configuration #1 chosen from 1 choice
>hub 4-5:1.0: USB hub found
>hub 4-5:1.0: 4 ports detected
>ata1.00: configured for UDMA/33
>scsi2 : ata_piix
>ata2: port disabled. ignoring.
>scsi 1:0:0:0: CD-ROM            SONY     DVD-ROM DDU810A  KD38 PQ: 0 ANSI: 5
>usb 4-5.1: new low speed USB device using ehci_hcd and address 3
>usb 4-5.1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-5.1
>usb 4-5.2: new low speed USB device using ehci_hcd and address 4
>usb 4-5.2: configuration #1 chosen from 1 choice
>input: Dell Dell USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.7-5.2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1184092051.768:2): selinux=0 auid=4294967295
>scsi 0:0:8:0: Attached scsi generic sg0 type 13
>sd 0:2:0:0: Attached scsi generic sg1 type 0
>sd 0:2:1:0: Attached scsi generic sg2 type 0
>scsi 1:0:0:0: Attached scsi generic sg3 type 5
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.5 (February 1, 2007)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001aa01d5cd7
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 001aa01d5cd9
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:10:0d.0[A] -> GSI 19 (level, low) -> IRQ 19
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>No dock devices found.
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 8323064k swap on /dev/VolGroup00/LogVol00.  Priority:-1 extents:1 across:8323064k
>bridge: Unknown parameter `mode'
>Ethernet Channel Bonding Driver: v3.1.1 (September 26, 2006)
>bonding: In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (0 msec) is incompatible with the forwarding delay time of the switch
>bonding: MII link monitoring set to 100 ms
>ADDRCONF(NETDEV_UP): bond0: link is not ready
>bonding: bond0: Adding slave eth0.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bonding: bond0: enslaving eth0 as an active interface with a down link.
>bonding: bond0: Adding slave eth1.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bonding: bond0: enslaving eth1 as an active interface with a down link.
>bnx2: eth0 NIC Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>bonding: bond0: link status definitely up for interface eth0.
>bonding: bond0: making interface eth0 the new active one.
>BUG: sleeping function called from invalid context at mm/slab.c:3035
>in_atomic():1, irqs_disabled():0
>
>Call Trace:
> <IRQ>  [<ffffffff8020ae3f>] kmem_cache_alloc+0x20/0x7e
> [<ffffffff80234f01>] alloc_skb_from_cache+0x3c/0x143
> [<ffffffff803db0e5>] rtmsg_ifinfo+0x26/0x9f
> [<ffffffff803db19e>] rtnetlink_event+0x40/0x45
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262b5>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>BUG: at kernel/mutex.c:311 __mutex_trylock_slowpath()
>
>Call Trace:
> <IRQ>  [<ffffffff8025e819>] mutex_trylock+0x56/0x104
> [<ffffffff803e02f4>] fib_rules_event+0x15/0xff
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262b5>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>RTNL: assertion failed at net/core/fib_rules.c (444)
>
>Call Trace:
> <IRQ>  [<ffffffff803e031c>] fib_rules_event+0x3d/0xff
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262b5>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>RTNL: assertion failed at net/ipv4/devinet.c (1055)
>
>Call Trace:
> <IRQ>  [<ffffffff804075fc>] inetdev_event+0x48/0x288
> [<ffffffff8025fd49>] _spin_unlock_bh+0x9/0x15
> [<ffffffff8023d6c3>] rt_run_flush+0x7b/0xb4
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262b5>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>RTNL: assertion failed at net/core/fib_rules.c (444)
>
>Call Trace:
> <IRQ>  [<ffffffff803e031c>] fib_rules_event+0x3d/0xff
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262c7>] :bonding:alb_swap_mac_addr+0xa7/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>RTNL: assertion failed at net/ipv4/devinet.c (1055)
>
>Call Trace:
> <IRQ>  [<ffffffff804075fc>] inetdev_event+0x48/0x288
> [<ffffffff8025fd49>] _spin_unlock_bh+0x9/0x15
> [<ffffffff8023d6c3>] rt_run_flush+0x7b/0xb4
> [<ffffffff80262d5b>] notifier_call_chain+0x20/0x32
> [<ffffffff803d317e>] dev_set_mac_address+0x52/0x58
> [<ffffffff88225e50>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff882262c7>] :bonding:alb_swap_mac_addr+0xa7/0x163
> [<ffffffff8822117f>] :bonding:bond_change_active_slave+0x1da/0x336
> [<ffffffff88221607>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8822312a>] :bonding:bond_mii_monitor+0x3c7/0x41d
> [<ffffffff88222d63>] :bonding:bond_mii_monitor+0x0/0x41d
> [<ffffffff8028a88b>] run_timer_softirq+0x138/0x1ac
> [<ffffffff80211801>] __do_softirq+0x59/0xcb
> [<ffffffff8025bd1c>] call_softirq+0x1c/0x300
> [<ffffffff80269292>] do_softirq+0x31/0x90
> [<ffffffff8026941b>] do_IRQ+0x12a/0x148
> [<ffffffff8038461c>] evtchn_do_upcall+0x86/0xe0
> [<ffffffff8025b7fe>] do_hypervisor_callback+0x1e/0x30
> <EOI>  [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
> [<ffffffff8026a7fb>] raw_safe_halt+0x7f/0xa3
> [<ffffffff80267eff>] xen_idle+0x34/0x4d
> [<ffffffff8024732b>] cpu_idle+0x8a/0xad
>
>bonding: bond0: first active interface up!
>bnx2: eth1 NIC Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
>bonding: bond0: link status definitely up for interface eth1.
>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>bond0: duplicate address detected!
>audit(1184084871.714:3): audit_pid=2039 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>Bridge firewalling registered
>eth1: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>device eth0 entered promiscuous mode
>device pbond0 entered promiscuous mode
>bond0: port 1(pbond0) entering learning state
>bond0: topology change detected, propagating
>bond0: port 1(pbond0) entering forwarding state
>bond0: duplicate address detected!
>bond0: duplicate address detected!
>virbr0: no IPv6 routers present
>pbond0: no IPv6 routers present

Actions: View

Attachments on bug 247644: 158869