Attachment 158929 Details for Bug 247752 – dmesg of boot/suspend/resume

dmesg of boot/suspend/resume

dmesg (text/plain), 37.79 KB, created by Joe Orton on 2007-07-11 09:16:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joe Orton

Created: 2007-07-11 09:16:50 UTC

Size: 37.79 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=LABEL=/ selinux=0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bf10000 (usable)
> BIOS-e820: 000000003bf10000 - 000000003bf19000 (ACPI data)
> BIOS-e820: 000000003bf19000 - 000000003bf80000 (ACPI NVS)
> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 245520) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F87D0, 0014 (r0 HP    )
>ACPI: RSDT 3BF131F4, 0038 (r1 HP     30B5      6040000  LTP        0)
>ACPI: FACP 3BF18D52, 0074 (r1 HP     30B5      6040000 PTL_    F4240)
>ACPI: DSDT 3BF1322C, 5B26 (r1 HP       30B5    6040000 MSFT  100000E)
>ACPI: FACS 3BF19FC0, 0040
>ACPI: MCFG 3BF18DC6, 003C (r1 HP     30B5      6040000  LTP        0)
>ACPI: APIC 3BF18E02, 0054 (r1 HP     30B5      6040000  LTP        0)
>ACPI: BOOT 3BF18E56, 0028 (r1 HP     30B5      6040000  LTP        1)
>ACPI: SSDT 3BF18E7E, 0182 (r1 HP     30B5      6040000  LTP        1)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000003bf10000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 245520) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000003bf10000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   245520
>On node 0 totalpages: 245421
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1281 pages reserved
>  DMA zone: 2660 pages, LIFO batch:0
>  DMA32 zone: 3300 pages used for memmap
>  DMA32 zone: 238124 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009d000 - 000000000009e000
>Nosave address range: 000000000009e000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000d2000
>Nosave address range: 00000000000d2000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 240784
>Kernel command line: ro root=LABEL=/ selinux=0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1607.350 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>CPU 0: aperture @ 452000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 957372k/982080k available (2321k kernel code, 24312k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 3216.37 BogoMIPS (lpj=1608186)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12557436
>Detected 12.557 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3214.13 BogoMIPS (lpj=1607066)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Turion(tm) 64 X2  stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=330
>Time:  9:07:19  Date: 06/11/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:05.0
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *10
>ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10
>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
>pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
>pnp: 00:00: iomem range 0x0-0x0 could not be reserved
>pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:03: ioport range 0x1000-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:03: ioport range 0x1400-0x147f has been reserved
>pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:03: ioport range 0x1800-0x187f has been reserved
>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:03: ioport range 0x3040-0x307f has been reserved
>pnp: 00:03: ioport range 0x3000-0x303f has been reserved
>PCI: Bridge: 0000:00:02.0
>Time: acpi_pm clocksource has been installed.
>  IO window: disabled.
>  MEM window: c3000000-c30fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: c8000000-c87fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: disabled.
>  MEM window: c3100000-c31fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3075k freed
>Simple Boot Flag at 0x36 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1184144839.499:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZS0] (52 C)
>ACPI: Thermal Zone [TZS1] (55 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Turion(tm) 64 X2  processors (version 2.00.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>  Magic number: 15:847:120
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 23, io mem 0xc0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xc0005000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>SCSI subsystem initialized
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>libata version 2.20 loaded.
>sata_nv 0000:00:0e.0: version 3.3
>PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ata1: SATA max UDMA/133 cmd 0x00000000000130b0 ctl 0x00000000000130a6 bmdma 0x0000000000013090 irq 21
>ata2: SATA max UDMA/133 cmd 0x00000000000130a8 ctl 0x00000000000130a2 bmdma 0x0000000000013098 irq 21
>scsi0 : sata_nv
>usb 2-8: new high speed USB device using ehci_hcd and address 2
>usb 2-8: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: HTS541010G9SA00, MBZOC60P, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x00000000000130af
>scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9SA00  MBZO PQ: 0 ANSI: 5
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda2: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 3252478
>ext3_orphan_cleanup: deleting unreferenced inode 3252491
>ext3_orphan_cleanup: deleting unreferenced inode 360497
>ext3_orphan_cleanup: deleting unreferenced inode 3252567
>ext3_orphan_cleanup: deleting unreferenced inode 3252497
>ext3_orphan_cleanup: deleting unreferenced inode 3248680
>ext3_orphan_cleanup: deleting unreferenced inode 3258289
>ext3_orphan_cleanup: deleting unreferenced inode 3254382
>ext3_orphan_cleanup: deleting unreferenced inode 3252231
>ext3_orphan_cleanup: deleting unreferenced inode 3252283
>ext3_orphan_cleanup: deleting unreferenced inode 360942
>ext3_orphan_cleanup: deleting unreferenced inode 360494
>ext3_orphan_cleanup: deleting unreferenced inode 3252243
>ext3_orphan_cleanup: deleting unreferenced inode 3252194
>ext3_orphan_cleanup: deleting unreferenced inode 3245464
>ext3_orphan_cleanup: deleting unreferenced inode 624634
>EXT3-fs: sda2: 16 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>input: PC Speaker as /class/input/input3
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>eth0: forcedeth.c: subsystem: 0103c:30b5 bound to 0000:00:14.0
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNK1] -> GSI 19 (level, high) -> IRQ 19
>fw_ohci: Added fw-ohci device 0000:03:09.0, OHCI version 1.10
>pata_amd 0000:00:0d.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000013080 irq 14
>ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000013088 irq 15
>scsi2 : pata_amd
>ATA: abnormal status 0x7F on port 0x00000000000101f7
>scsi3 : pata_amd
>ata4.00: ATAPI, max MWDMA2
>fw_core: created new fw device fw0 (0 config rom retries)
>ata4.00: configured for MWDMA2
>scsi 3:0:0:0: CD-ROM            SONY     DVD RW DW-G520A  GPSD PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 18 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
>ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
>ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI-E core, index 3
>ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
>bcm43xx_mac80211: Broadcom 4311 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Found PHY: Analog 4, Type 2, Revision 8
>bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>bcm43xx_mac80211: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sdhci: SDHCI controller found at 0000:03:09.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:03:09.1[B] -> Link [LNK2] -> GSI 17 (level, high) -> IRQ 17
>mmc0: SDHCI at 0xc3100800 irq 17 DMA
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3836 buckets, 30688 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>bcm43xx_mac80211: Adding Interface type 2
>ssb: Switching to PCI-E core, index 3
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned on
>bcm43xx_mac80211: Radio disabled by hardware
>bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=51, tgt=120). Disabling TX power adjustment.
>bcm43xx_mac80211: Chip initialized
>bcm43xx_mac80211: 32-bit DMA initialized
>bcm43xx_mac80211: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 21 (level, high) -> IRQ 21
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>ssb ssb0:1: suspend
>bcm43xx_mac80211 ssb0:0: suspend
>bcm43xx_mac80211: Suspending...
>bcm43xx_mac80211: Wireless interface stopped
>bcm43xx_mac80211: DMA-32 0x0200 (RX) max used slots: 0/64
>bcm43xx_mac80211: DMA-32 0x02A0 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0280 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0260 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0240 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0220 (TX) max used slots: 22/128
>bcm43xx_mac80211: DMA-32 0x0200 (TX) max used slots: 0/128
>bcm43xx_mac80211: Radio turned off
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned off
>bcm43xx_mac80211: Device suspended.
>sr 3:0:0:0: suspend
>sd 0:0:0:0: suspend
> usbdev2.2: PM: suspend 0->2, parent 2-8 already 2
>usb 2-8:1.1: PM: suspend 2-->2
>usb 2-8:1.1: PM: suspend 2->2, parent 2-8 already 2
> usbdev2.2_ep83: PM: suspend 0->2, parent 2-8:1.0 already 2
>usb 2-8:1.0: PM: suspend 2-->2
>usb 2-8:1.0: PM: suspend 2->2, parent 2-8 already 2
> usbdev2.2_ep00: PM: suspend 0->2, parent 2-8 already 2
>usb 2-8: PM: suspend 2-->2
>usb 2-8: PM: suspend 2->2, parent usb2 already 2
> usbdev2.1: PM: suspend 0->2, parent usb2 already 2
> usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
>hub 2-0:1.0: PM: suspend 2-->2
>hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
> usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
>usb usb2: PM: suspend 2-->2
> usbdev1.1: PM: suspend 0->2, parent usb1 already 2
> usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
>hub 1-0:1.0: PM: suspend 2-->2
>hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
> usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
>usb usb1: PM: suspend 2-->2
>psmouse serio4: suspend
>serio serio3: suspend
>serio serio2: suspend
>serio serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>pci_express 0000:00:03.0:pcie00: suspend
>pci_express 0000:00:02.0:pcie00: suspend
>pcspkr pcspkr: suspend
>i8042 aux 00:0a: suspend
>i8042 kbd 00:09: suspend
>pnp 00:08: suspend
>pnp 00:07: suspend
>pnp 00:06: suspend
>pnp 00:05: suspend
>system 00:04: suspend
>system 00:03: suspend
>system 00:02: suspend
>pnp 00:01: suspend
>system 00:00: suspend
>pci 0000:03:09.4: suspend
>pci 0000:03:09.3: suspend
>pci 0000:03:09.2: suspend
>sdhci 0000:03:09.1: suspend
>ACPI: PCI interrupt for device 0000:03:09.1 disabled
>fw_ohci 0000:03:09.0: suspend
>bcm43xx-pci 0000:01:00.0: suspend
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>k8temp 0000:00:18.3: suspend
>k8_edac 0000:00:18.2: suspend
>pci 0000:00:18.1: suspend
>pci 0000:00:18.0: suspend
>forcedeth 0000:00:14.0: suspend
>HDA Intel 0000:00:10.1: suspend
>ACPI: PCI interrupt for device 0000:00:10.1 disabled
>pci 0000:00:10.0: suspend
>sata_nv 0000:00:0e.0: suspend
>ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>pata_amd 0000:00:0d.0: suspend
>ehci_hcd 0000:00:0b.1: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:0b.1 disabled
>ohci_hcd 0000:00:0b.0: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:0b.0 disabled
>pci 0000:00:0a.3: suspend
>nForce2_smbus 0000:00:0a.1: suspend
>pci 0000:00:0a.0: suspend
>pci 0000:00:09.0: suspend
>pci 0000:00:05.0: suspend
>pcieport-driver 0000:00:03.0: suspend
>pcieport-driver 0000:00:02.0: suspend
>pci 0000:00:00.7: suspend
>pci 0000:00:00.6: suspend
>pci 0000:00:00.5: suspend
>pci 0000:00:00.4: suspend
>pci 0000:00:00.3: suspend
>pci 0000:00:00.2: suspend
>pci 0000:00:00.1: suspend
>pci 0000:00:00.0: suspend
>thermal thermal:02: suspend
>thermal thermal:01: suspend
>acpi thermal:00: suspend
>pci_link PNP0C0F:12: suspend
>pci_link PNP0C0F:11: suspend
>pci_link PNP0C0F:10: suspend
>pci_link PNP0C0F:0f: suspend
>pci_link PNP0C0F:0e: suspend
>pci_link PNP0C0F:0d: suspend
>pci_link PNP0C0F:0c: suspend
>pci_link PNP0C0F:0b: suspend
>pci_link PNP0C0F:0a: suspend
>pci_link PNP0C0F:09: suspend
>pci_link PNP0C0F:08: suspend
>pci_link PNP0C0F:07: suspend
>pci_link PNP0C0F:06: suspend
>pci_link PNP0C0F:05: suspend
>pci_link PNP0C0F:04: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>ac ACPI0003:00: suspend
>battery PNP0C0A:00: suspend
>ec PNP0C09:00: suspend
>acpi SYN0127:00: suspend
>acpi PNP0303:00: suspend
>acpi PNP0C04:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0800:00: suspend
>acpi PNP0200:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0000:00: suspend
>acpi PNP0C02:02: suspend
>acpi PNP0C02:01: suspend
>acpi PNP0C02:00: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>acpi device:01: suspend
>video video:00: suspend
>pci_root PNP0A03:00: suspend
>acpi PNP0C01:00: suspend
>button PNP0C0C:00: suspend
>button PNP0C0E:00: suspend
>button PNP0C0D:00: suspend
>acpi PNP0C14:00: suspend
>acpi HPQ0006:00: suspend
>acpi device:00: suspend
>processor ACPI0007:01: suspend
>processor ACPI0007:00: suspend
>button button_power:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>Breaking affinity for irq 1
>Breaking affinity for irq 9
>Breaking affinity for irq 12
>Breaking affinity for irq 15
>Breaking affinity for irq 18
>Breaking affinity for irq 20
>Breaking affinity for irq 21
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>PM: Entering mem sleep
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>pcspkr pcspkr: LATE suspend
>pci 0000:03:09.4: LATE suspend
>pci 0000:03:09.3: LATE suspend
>pci 0000:03:09.2: LATE suspend
>sdhci 0000:03:09.1: LATE suspend
>fw_ohci 0000:03:09.0: LATE suspend
>bcm43xx-pci 0000:01:00.0: LATE suspend
>k8temp 0000:00:18.3: LATE suspend
>k8_edac 0000:00:18.2: LATE suspend
>pci 0000:00:18.1: LATE suspend
>pci 0000:00:18.0: LATE suspend
>forcedeth 0000:00:14.0: LATE suspend
>HDA Intel 0000:00:10.1: LATE suspend
>pci 0000:00:10.0: LATE suspend
>pci 0000:00:0a.3: LATE suspend
>nForce2_smbus 0000:00:0a.1: LATE suspend
>pci 0000:00:0a.0: LATE suspend
>pci 0000:00:09.0: LATE suspend
>pci 0000:00:05.0: LATE suspend
>pcieport-driver 0000:00:03.0: LATE suspend
>pcieport-driver 0000:00:02.0: LATE suspend
>pci 0000:00:00.7: LATE suspend
>pci 0000:00:00.6: LATE suspend
>pci 0000:00:00.5: LATE suspend
>pci 0000:00:00.4: LATE suspend
>pci 0000:00:00.3: LATE suspend
>pci 0000:00:00.2: LATE suspend
>pci 0000:00:00.1: LATE suspend
>pci 0000:00:00.0: LATE suspend
>Back to C!
>pci 0000:00:00.0: EARLY resume
>pci 0000:00:00.1: EARLY resume
>pci 0000:00:00.2: EARLY resume
>pci 0000:00:00.3: EARLY resume
>pci 0000:00:00.4: EARLY resume
>pci 0000:00:00.5: EARLY resume
>pci 0000:00:00.6: EARLY resume
>pci 0000:00:00.7: EARLY resume
>pcieport-driver 0000:00:02.0: EARLY resume
>pcieport-driver 0000:00:03.0: EARLY resume
>pci 0000:00:05.0: EARLY resume
>pci 0000:00:09.0: EARLY resume
>pci 0000:00:0a.0: EARLY resume
>nForce2_smbus 0000:00:0a.1: EARLY resume
>pci 0000:00:0a.3: EARLY resume
>ohci_hcd 0000:00:0b.0: EARLY resume
>ehci_hcd 0000:00:0b.1: EARLY resume
>pata_amd 0000:00:0d.0: EARLY resume
>sata_nv 0000:00:0e.0: EARLY resume
>pci 0000:00:10.0: EARLY resume
>HDA Intel 0000:00:10.1: EARLY resume
>forcedeth 0000:00:14.0: EARLY resume
>pci 0000:00:18.0: EARLY resume
>pci 0000:00:18.1: EARLY resume
>k8_edac 0000:00:18.2: EARLY resume
>k8temp 0000:00:18.3: EARLY resume
>bcm43xx-pci 0000:01:00.0: EARLY resume
>fw_ohci 0000:03:09.0: EARLY resume
>sdhci 0000:03:09.1: EARLY resume
>pci 0000:03:09.2: EARLY resume
>pci 0000:03:09.3: EARLY resume
>pci 0000:03:09.4: EARLY resume
>pcspkr pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>PM: Finishing wakeup.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3214.18 BogoMIPS (lpj=1607094)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Turion(tm) 64 X2  stepping 02
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>CPU1 is up
>acpi acpi_system:00: resuming
>button button_power:00: resuming
>processor ACPI0007:00: resuming
>processor ACPI0007:01: resuming
>acpi device:00: resuming
>acpi HPQ0006:00: resuming
>acpi PNP0C14:00: resuming
>button PNP0C0D:00: resuming
>button PNP0C0E:00: resuming
>button PNP0C0C:00: resuming
>acpi PNP0C01:00: resuming
>pci_root PNP0A03:00: resuming
>video video:00: resuming
>acpi device:01: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi PNP0C02:00: resuming
>acpi PNP0C02:01: resuming
>acpi PNP0C02:02: resuming
>acpi PNP0000:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0303:00: resuming
>acpi SYN0127:00: resuming
>ec PNP0C09:00: resuming
>battery PNP0C0A:00: resuming
>ac ACPI0003:00: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>pci_link PNP0C0F:07: resuming
>pci_link PNP0C0F:08: resuming
>pci_link PNP0C0F:09: resuming
>pci_link PNP0C0F:0a: resuming
>pci_link PNP0C0F:0b: resuming
>pci_link PNP0C0F:0c: resuming
>pci_link PNP0C0F:0d: resuming
>pci_link PNP0C0F:0e: resuming
>pci_link PNP0C0F:0f: resuming
>pci_link PNP0C0F:10: resuming
>pci_link PNP0C0F:11: resuming
>pci_link PNP0C0F:12: resuming
>acpi thermal:00: resuming
>thermal thermal:01: resuming
>thermal thermal:02: resuming
>pci 0000:00:00.0: resuming
>pci 0000:00:00.1: resuming
>pci 0000:00:00.2: resuming
>pci 0000:00:00.3: resuming
>pci 0000:00:00.4: resuming
>pci 0000:00:00.5: resuming
>pci 0000:00:00.6: resuming
>pci 0000:00:00.7: resuming
>pcieport-driver 0000:00:02.0: resuming
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcieport-driver 0000:00:03.0: resuming
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pci 0000:00:05.0: resuming
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 21 (level, high) -> IRQ 21
>pci 0000:00:09.0: resuming
>pci 0000:00:0a.0: resuming
>nForce2_smbus 0000:00:0a.1: resuming
>pci 0000:00:0a.3: resuming
>ohci_hcd 0000:00:0b.0: resuming
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ehci_hcd 0000:00:0b.1: resuming
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>pata_amd 0000:00:0d.0: resuming
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>sata_nv 0000:00:0e.0: resuming
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>pci 0000:00:10.0: resuming
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>HDA Intel 0000:00:10.1: resuming
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 18 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>forcedeth 0000:00:14.0: resuming
>eth0: no link during initialization.
>pci 0000:00:18.0: resuming
>pci 0000:00:18.1: resuming
>k8_edac 0000:00:18.2: resuming
>k8temp 0000:00:18.3: resuming
>bcm43xx-pci 0000:01:00.0: resuming
>PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 19
>fw_ohci 0000:03:09.0: resuming
>ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNK1] -> GSI 19 (level, high) -> IRQ 19
>sdhci 0000:03:09.1: resuming
>ACPI: PCI Interrupt 0000:03:09.1[B] -> Link [LNK2] -> GSI 17 (level, high) -> IRQ 17
>pci 0000:03:09.2: resuming
>pci 0000:03:09.3: resuming
>pci 0000:03:09.4: resuming
>system 00:00: resuming
>pnp 00:01: resuming
>system 00:02: resuming
>system 00:03: resuming
>system 00:04: resuming
>pnp 00:05: resuming
>pnp 00:06: resuming
>pnp 00:07: resuming
>pnp 00:08: resuming
>i8042 kbd 00:09: resuming
>i8042 aux 00:0a: resuming
>pcspkr pcspkr: resuming
>pci_express 0000:00:02.0:pcie00: resuming
>pci_express 0000:00:03.0:pcie00: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>serio serio1: resuming
>serio serio2: resuming
>serio serio3: resuming
>psmouse serio4: resuming
>ATA: abnormal status 0x7F on port 0x00000000000101f7
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x00000000000130af
> usbdev1.1_ep00: PM: resume from 0, parent usb1 still 2
> usbdev1.1_ep81: PM: resume from 0, parent 1-0:1.0 still 2
> usbdev1.1: PM: resume from 0, parent usb1 still 2
> usbdev2.1_ep00: PM: resume from 0, parent usb2 still 2
> usbdev2.1_ep81: PM: resume from 0, parent 2-0:1.0 still 2
> usbdev2.1: PM: resume from 0, parent usb2 still 2
> usbdev2.2_ep00: PM: resume from 0, parent 2-8 still 2
> usbdev2.2_ep83: PM: resume from 0, parent 2-8:1.0 still 2
> usbdev2.2: PM: resume from 0, parent 2-8 still 2
>sd 0:0:0:0: resuming
>sr 3:0:0:0: resuming
>bcm43xx_mac80211 ssb0:0: resuming
>bcm43xx_mac80211: Resuming...
>bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned on
>bcm43xx_mac80211: Radio disabled by hardware
>bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=51, tgt=120). Disabling TX power adjustment.
>bcm43xx_mac80211: Chip initialized
>bcm43xx_mac80211: 32-bit DMA initialized
>bcm43xx_mac80211: PHY transmission error
>bcm43xx_mac80211: Wireless interface started
>bcm43xx_mac80211: Device resumed.
>ssb ssb0:1: resuming
>Restarting tasks ... done.
>bcm43xx_mac80211: PHY transmission error
>bcm43xx_mac80211: PHY transmission error
>ata4.00: configured for MWDMA2
>eth0: link up.
>ata1: SATA link down (SStatus 111 SControl 300)
>ATA: abnormal status 0x80 on port 0x00000000000130b7
>ata1: failed to recover some devices, retrying in 5 secs
>ata1: SATA link down (SStatus 111 SControl 300)
>ATA: abnormal status 0x80 on port 0x00000000000130b7
>ata1.00: limiting speed to UDMA/100:PIO3
>ata1: failed to recover some devices, retrying in 5 secs
>ata1: SATA link down (SStatus 111 SControl 300)
>ATA: abnormal status 0x80 on port 0x00000000000130b7
>ata1.00: disabled
>sd 0:0:0:0: rejecting I/O to offline device
>sd 0:0:0:0: rejecting I/O to offline device
>Buffer I/O error on device sda2, logical block 865606
>lost page write due to I/O error on sda2
>sd 0:0:0:0: SCSI error: return code = 0x00010000
>end_request: I/O error, dev sda, sector 7048973
>Buffer I/O error on device sda2, logical block 855016
>lost page write due to I/O error on sda2
>sd 0:0:0:0: rejecting I/O to offline device
>Aborting journal on device sda2.
>sd 0:0:0:0: rejecting I/O to offline device
>sd 0:0:0:0: rejecting I/O to offline device
>__journal_remove_journal_head: freeing b_committed_data
>journal commit I/O error
>ext3_abort called.
>EXT3-fs error (device sda2): ext3_journal_start_sb: Detected aborted journal<3>sd 0:0:0:0: rejecting I/O to offline device
>Buffer I/O error on device sda2, logical block 865606
>lost page write due to I/O error on sda2
>sd 0:0:0:0: rejecting I/O to offline device
>Buffer I/O error on device sda2, logical block 882565
>lost page write due to I/O error on sda2
>
>ext3_abort called.
>EXT3-fs error (device sda2): ext3_journal_start_sb: Detected aborted journal
>Remounting filesystem read-only
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data
>__journal_remove_journal_head: freeing b_frozen_data

Actions: View

Attachments on bug 247752: 158929