Attachment 159024 Details for Bug 242295 – dmesg output for kernel-2.6.22-2.fc7.i686.rpm (Dave Jone's WIP kernel)

dmesg output for kernel-2.6.22-2.fc7.i686.rpm (Dave Jone's WIP kernel)

dmesg-2.6.22-2-usbstick.fc7.log (text/plain), 20.81 KB, created by TC on 2007-07-12 01:20:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: TC

Created: 2007-07-12 01:20:27 UTC

Size: 20.81 KB

patch

obsolete

>Linux version 2.6.22-2.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jul 10 15:21:42 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
> BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131068) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131068
>  HighMem    131068 ->   131068
>early_node_map[1] active PFN ranges
>    0:        0 ->   131068
>On node 0 totalpages: 131068
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125981 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6B00, 0014 (r0 ASUS  )
>ACPI: RSDT 1FFFC000, 002C (r1 ASUS   TUSI-M   30303031 MSFT 31313031)
>ACPI: FACP 1FFFC080, 0074 (r1 ASUS   TUSI-M   30303031 MSFT 31313031)
>ACPI: DSDT 1FFFC100, 2121 (r1   ASUS TUSI-M       1000 MSFT  100000B)
>ACPI: FACS 1FFFF000, 0040
>ACPI: BOOT 1FFFC040, 0028 (r1 ASUS   TUSI-M   30303031 MSFT 31313031)
>ACPI: PM-Timer IO Port: 0xe408
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
>Built 1 zonelists.  Total pages: 130045
>Kernel command line: ro root=/dev/VolGroup00/LogVol06 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0140d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0794000 soft=c0774000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 930.368 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511300k/524272k available (2115k kernel code, 12376k reserved, 1117k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfffc000   ( 511 MB)
>      .init : 0xc072e000 - 0xc076f000   ( 260 kB)
>      .data : 0xc0610f6e - 0xc0728504   (1117 kB)
>      .text : 0xc0400000 - 0xc0610f6e   (2115 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1861.23 BogoMIPS (lpj=930619)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0ca0)
>CPU0: Intel Pentium III (Coppermine) stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 22:01:19  Date: 06/11/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0e70, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x1fffffff could not be reserved
>pnp: 00:00: iomem range 0xffee0000-0xffefffff has been reserved
>pnp: 00:03: ioport range 0xe400-0xe47f has been reserved
>pnp: 00:03: ioport range 0xe480-0xe4ff has been reserved
>pnp: 00:03: ioport range 0x290-0x297 has been reserved
>pnp: 00:03: ioport range 0x480-0x48f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: e6700000-e67fffff
>  PREFETCH window: feb00000-febfffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3478k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1184191279.617:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2CE88BD452847FB7
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:0d.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>cpuidle: driver acpi_idle failed to attach to cpu 0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected SiS chipset - id:1584
>agpgart: AGP aperture is 64M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:128:47
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 867k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:0f.0: UHCI Host Controller
>uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:0f.0: irq 10, io base 0x00009800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
>uhci_hcd 0000:00:0f.1: UHCI Host Controller
>uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:0f.1: irq 7, io base 0x00009400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:01.2: OHCI Host Controller
>ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:01.2: irq 5, io mem 0xe7800000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:01.3: OHCI Host Controller
>ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:01.3: irq 5, io mem 0xe7000000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:0f.2[C] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:0f.2: EHCI Host Controller
>ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:0f.2: irq 5, io mem 0xe4800000
>ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 4 ports detected
>SCSI subsystem initialized
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>libata version 2.21 loaded.
>pata_sis 0000:00:00.1: version 0.5.1
>scsi0 : pata_sis
>scsi1 : pata_sis
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15
>usb 3-1: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input2
>input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:01.2-1
>ata1.00: ATA-7: ST3160812A, 3.AAE, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 3-2: new full speed USB device using ohci_hcd and address 3
>ata2.00: ATAPI: LITE-ON DVDRW SHM-165P6S, MS0P, max UDMA/66
>ata2.00: limited to UDMA/33 due to 40-wire cable
>usb 3-2: configuration #1 chosen from 1 choice
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3160812A       3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: limiting speed to UDMA/66:PIO4
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: soft resetting port
>ata1.00: configured for UDMA/66
>ata1: EH complete
> sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW SHM-165P6S MS0P PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1823 types, 79 bools, 1 sens, 1024 cats
>security:  61 classes, 68327 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1184191408.098:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>3c59x: Donald Becker and others.
>0000:00:0e.0: 3Com PCI 3c905C Tornado at e0842000.
>ACPI: PCI Interrupt 0000:00:0f.3[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>firewire_ohci: Added fw-ohci device 0000:00:0f.3, OHCI version 1.0
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year
>firewire_core: created new fw device fw0 (0 config rom retries)
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 3-2:1.0: pl2303 converter detected
>usb 3-2: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
>loop: module loaded
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.27.0 20060524 on minor 0
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda2, type vfat), uses genfs_contexts
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
>eth0:  setting full-duplex.
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>mtrr: no MTRR for f0000000,4000000 found
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>WARNING: at drivers/usb/core/driver.c:1192 usb_autopm_do_device() (Not tainted)
> [<c057056f>] usb_autopm_do_device+0x63/0xd9
> [<c057092c>] usb_suspend_both+0x1fc/0x20c
> [<c05705ce>] usb_autopm_do_device+0xc2/0xd9
> [<c0572c1b>] usb_create_sysfs_intf_files+0x74/0x87
> [<c056f82b>] usb_set_configuration+0x3c8/0x3f2
> [<c0576024>] generic_probe+0x18b/0x1db
> [<c0570dde>] usb_probe_device+0x32/0x37
> [<c05597e7>] driver_probe_device+0xea/0x168
> [<c060bd85>] klist_next+0x4b/0x6c
> [<c0559865>] __device_attach+0x0/0x5
> [<c0558c53>] bus_for_each_drv+0x39/0x60
> [<c05598f7>] device_attach+0x72/0x86
> [<c0559865>] __device_attach+0x0/0x5
> [<c0558bc4>] bus_attach_device+0x26/0x7c
> [<c0558f22>] bus_add_device+0xd0/0x10b
> [<c0557b8b>] device_add+0x346/0x526
> [<c056b842>] usb_new_device+0xa4/0xf1
> [<c056c39f>] hub_thread+0x6fd/0xa6a
> [<c060c705>] __sched_text_start+0x675/0x714
> [<c041fc2e>] __wake_up_common+0x32/0x55
> [<c0438515>] autoremove_wake_function+0x0/0x35
> [<c056bca2>] hub_thread+0x0/0xa6a
> [<c043844e>] kthread+0x38/0x5e
> [<c0438416>] kthread+0x0/0x5e
> [<c0405b6b>] kernel_thread_helper+0x7/0x10
> =======================
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Pretec   512MB Tiny       1.00 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] 1040384 512-byte hardware sectors (533 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 1040384 512-byte hardware sectors (533 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0

Actions: View

Attachments on bug 242295: 156009 | 156077 | 156258 | 157244 | 157245 | 159024 | 221491