Attachment 159217 Details for Bug 247361 – Attached is the LSPCI output for my Dell D620 failing to boot with kernel 2.6.21-1.3255. Tried with hpet=disabled... works... without it. Hangs at the same place.

Attached is the LSPCI output for my Dell D620 failing to boot with kernel 2.6.21-1.3255. Tried with hpet=disabled... works... without it. Hangs at the same place.

lspci.txt (text/plain), 17.36 KB, created by James Allerton-Austin on 2007-07-13 17:26:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Allerton-Austin

Created: 2007-07-13 17:26:28 UTC

Size: 17.36 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: ed000000-efefffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [88] Subsystem: Dell Unknown device 01c2
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 1, PowerLimit 75.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express Unknown type IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
>		Link: Latency L0s <64ns, L1 <1us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed unknown, Width x0
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 2, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Dell Unknown device 01c2
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: ecf00000-ecffffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 3, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Dell Unknown device 01c2
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: ece00000-ecefffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 4, PowerLimit 6.500000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Dell Unknown device 01c2
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 4: I/O ports at bf80 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 20
>	Region 4: I/O ports at bf60 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 21
>	Region 4: I/O ports at bf40 [size=32]
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 22
>	Region 4: I/O ports at bf20 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Subsystem: Dell Unknown device 01c2
>
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at bfa0 [size=16]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 17
>	Region 4: I/O ports at 10c0 [size=32]
>
>01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) (prog-if 00 [VGA])
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at ef000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <256ns, L1 <4us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>
>09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
>	Subsystem: Dell Unknown device 01c2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at ecef0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
>		Address: fffffff5ffffd6f4  Data: dfff
>	Capabilities: [d0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <4us, L1 unlimited
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
>		Link: Latency L0s <2us, L1 <64us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>
>0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>	Subsystem: Intel Corporation Unknown device 1021
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at ecfff000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [e0] Express Legacy Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 unlimited
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
>		Link: Latency L0s <128ns, L1 <64us
>		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>

Actions: View

Attachments on bug 247361: 158826 | 159217