Attachment 159488 Details for Bug 248665 – dmesg from kernel-2.6.21-1.3228.fc7.x86_64

dmesg from kernel-2.6.21-1.3228.fc7.x86_64

dmesg-2.6.21-1.3228.fc7.txt (text/plain), 16.36 KB, created by Jason Quartarone on 2007-07-18 01:46:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason Quartarone

Created: 2007-07-18 01:46:06 UTC

Size: 16.36 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037fef000 (usable)
> BIOS-e820: 0000000037ff0000 - 0000000037ffffc0 (ACPI data)
> BIOS-e820: 0000000037ffffc0 - 0000000038000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 229359) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000E5010, 0014 (r0 OID_00)
>ACPI: RSDT 37FFC360, 0030 (r1 INSYDE FACP_000      100 0000    10200)
>ACPI: FACP 37FFFAC0, 0074 (r1 INSYDE FACP_000      100 0000    10200)
>ACPI: DSDT 37FFC3A0, 3715 (r1 INSYDE ATIRS480     1000 INTL 20040116)
>ACPI: FACS 37FFFFC0, 0040
>ACPI: APIC 37FFFB50, 0068 (r1 INSYDE APIC_000 30303030 0000    10200)
>ACPI: HPET 37FFFBC0, 0038 (r1 INSYDE HPET_000 30303030 0000 30303030)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 0000000037fef000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 229359) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-0000000037fef000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   229359
>On node 0 totalpages: 229262
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1278 pages reserved
>  DMA zone: 2665 pages, LIFO batch:0
>  DMA32 zone: 3079 pages used for memmap
>  DMA32 zone: 222184 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed0000000000000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 38000000:c7f80000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 224849
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1800.095 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>CPU 0: aperture @ 0 size 32 MB
>No AGP bridge found
>Memory: 893864k/917436k available (2321k kernel code, 23184k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 3602.29 BogoMIPS (lpj=1801148)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12500667
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>Time: 16:13:16  Date: 06/16/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-103f claimed by ali7101 ACPI
>Boot video device is 0000:01:05.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: Power Resource [PUT2] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:11.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:05: iomem range 0xd0000-0xdefff has been reserved
>pnp: 00:05: iomem range 0xe0000000-0xe0ffffff has been reserved
>pnp: 00:07: ioport range 0x480-0x48f has been reserved
>pnp: 00:07: ioport range 0x330-0x331 has been reserved
>pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:07: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:07: ioport range 0x1400-0x140f has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: c0000000-cfffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Bus 3, cardbus bridge: 0000:00:10.0
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 40000000-43ffffff
>  MEM window: 44000000-47ffffff
>PCI: Bridge: 0000:00:19.0
>  IO window: a000-bfff
>  MEM window: b8000000-bfffffff
>  PREFETCH window: 88000000-8fffffff
>PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3738k freed
>audit: initializing netlink socket (disabled)
>audit(1184602396.442:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Time: acpi_pm clocksource has been installed.
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:10.0 [1071:8317]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:10.0, mfunc 0x01ac1b22, devctl 0x66
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 17
>Socket status: 30000006
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xa
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x18
>  Magic number: 15:73:237
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:1c.0: OHCI Host Controller
>ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:1c.0: irq 20, io mem 0x48023000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:1c.1: OHCI Host Controller
>ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:1c.1: irq 18, io mem 0x48024000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:1c.2: OHCI Host Controller
>ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:1c.2: irq 20, io mem 0x48025000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1c.3: EHCI Host Controller
>ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1c.3: debug port 1
>ehci_hcd 0000:00:1c.3: irq 23, io mem 0x48026000
>ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011100 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011108 irq 15
>scsi0 : pata_ali
>ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
>ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0A1, max UDMA/100
>ata1.00: 39070080 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
>ata1.00: configured for UDMA/33
>scsi1 : pata_ali
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>ata2.01: ATAPI, max UDMA/33
>usb 1-2: configuration #1 chosen from 1 choice
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23DA-2 00J2 PQ: 0 ANSI: 5
>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>input: HID 04b3:310b as /class/input/input2
>input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1c.0-2
> sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:1:0: CD-ROM            MATSHITA UJ-840D          1.00 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1184602405.437:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:1:0: Attached scsi generic sg1 type 5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: RTL8169sb/8110sb at 0xffffc20000022300, 00:40:d0:76:4a:c8, IRQ 16
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:10.3[A] -> GSI 17 (level, low) -> IRQ 17
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:00:10.4 [104c:8034] (rev 0)
>ACPI: PCI Interrupt 0000:00:10.4[A] -> GSI 17 (level, low) -> IRQ 17
>mmc0: SDHCI at 0xd000a000 irq 17 DMA
>mmc1: SDHCI at 0xd000a100 irq 17 DMA
>mmc2: SDHCI at 0xd000a200 irq 17 DMA
>Loading module: rt2500pci - 2.0.0 by http://rt2x00.serialmonkey.com.
>PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>wmaster0: Selected rate control algorithm 'simple'
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 19 (level, low) -> IRQ 19
>fw_ohci: Added fw-ohci device 0000:00:10.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 22 (level, low) -> IRQ 22
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>fw_core: created new fw device fw0 (0 config rom retries)
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3583 buckets, 28664 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 23
>IrCOMM protocol (Dag Brattli)
>PPP generic driver version 2.4.2
>r8169: eth0: link up
>r8169: eth0: link up
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 248665: 159488 | 159494 | 159531 | 159540 | 237521 | 237531