Attachment 159566 Details for Bug 248819 – output of hdparm, lsmod, dmesg for 6.20 and 6.22.1-15

output of hdparm, lsmod, dmesg for 6.20 and 6.22.1-15

kernel_info.txt (text/plain), 58.93 KB, created by James Hubbard on 2007-07-18 23:19:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Hubbard

Created: 2007-07-18 23:19:37 UTC

Size: 58.93 KB

patch

obsolete

>KERNEL-2.6.20-1.2962.FC6
>
>hdparm -tT /dev/sda
>
>/dev/sda:
> Timing cached reads:   14492 MB in  1.99 seconds = 7273.03 MB/sec
> Timing buffered disk reads:  148 MB in  3.00 seconds =  49.27 MB/sec
>
>lsmod 
>
>Module                  Size  Used by
>autofs4                24261  2 
>hidp                   23617  2 
>rfcomm                 43865  0 
>l2cap                  30657  10 hidp,rfcomm
>bluetooth              57893  5 hidp,rfcomm,l2cap
>sunrpc                153597  1 
>cpufreq_ondemand       12109  1 
>nls_utf8                6209  1 
>ntfs                  210964  1 
>dm_mirror              25301  0 
>dm_multipath           21833  0 
>dm_mod                 58509  2 dm_mirror,dm_multipath
>video                  19909  0 
>sbs                    19073  0 
>i2c_ec                  9025  1 sbs
>dock                   13977  0 
>button                 11857  0 
>battery                13893  0 
>asus_acpi              20445  0 
>backlight              10177  1 asus_acpi
>ac                      9157  0 
>lp                     16265  0 
>snd_hda_intel          24153  0 
>snd_hda_codec         156353  1 snd_hda_intel
>snd_seq_dummy           7877  0 
>snd_seq_oss            33601  0 
>snd_seq_midi_event     11201  1 snd_seq_oss
>snd_seq                51249  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_usb_audio          78785  0 
>snd_usb_lib            19649  1 snd_usb_audio
>snd_pcm_oss            43617  0 
>sg                     37213  0 
>snd_rawmidi            26817  1 snd_usb_lib
>snd_mixer_oss          19393  1 snd_pcm_oss
>snd_seq_device         11853  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
>snd_pcm                75205  4 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss
>snd_hwdep              12869  1 snd_usb_audio
>snd_timer              25157  2 snd_seq,snd_pcm
>uvcvideo               46084  0 
>snd                    53829  12 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_usb_audio,snd_pcm_oss,snd_rawmidi,snd_mixer_oss,snd_seq_device,snd_pcm,snd_hwdep,snd_timer
>compat_ioctl32          5569  1 uvcvideo
>ipw3945               188320  1 
>joydev                 13313  0 
>videodev               29633  1 uvcvideo
>v4l1_compat            16581  2 uvcvideo,videodev
>soundcore              11681  1 snd
>snd_page_alloc         13769  2 snd_hda_intel,snd_pcm
>nvidia               7256788  0 
>iTCO_wdt               15109  0 
>ieee80211              35209  1 ipw3945
>v4l2_common            26945  2 uvcvideo,videodev
>iTCO_vendor_support     7877  1 iTCO_wdt
>ieee80211_crypt        10049  1 ieee80211
>ohci1394               37489  0 
>i2c_i801               11725  0 
>ieee1394              294681  1 ohci1394
>i2c_core               24897  3 i2c_ec,nvidia,i2c_i801
>tg3                   104645  0 
>parport_pc             30053  1 
>parport                38537  2 lp,parport_pc
>ide_cd                 40673  0 
>cdrom                  37345  1 ide_cd
>serio_raw              10821  0 
>ata_piix               19141  4 
>libata                104661  1 ata_piix
>sd_mod                 24129  5 
>scsi_mod              138093  3 sg,libata,sd_mod
>ext3                  125641  2 
>jbd                    60777  1 ext3
>ehci_hcd               34125  0 
>ohci_hcd               23493  0 
>uhci_hcd               26705  0 
>
>dmesg
>
>Linux version 2.6.20-1.2962.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Jun 19 19:27:14 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fd81400 end: 000000007fe81400 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fe81400 size: 000000000017ec00 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000f0000000 size: 0000000004007000 end: 00000000f4007000 type: 2
>copy_e820_map() start: 00000000f4008000 size: 0000000000004000 end: 00000000f400c000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe81400 (usable)
> BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523905) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523905
>early_node_map[1] active PFN ranges
>    0:        0 ->   523905
>On node 0 totalpages: 523905
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2876 pages used for memmap
>  HighMem zone: 291653 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fc070
>ACPI: RSDT (v001 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe8198a
>ACPI: FADT (v001 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe82800
>ACPI: HPET (v001 DELL    M07     0x00000001 ASL  0x00000061) @ 0x7fe82f00
>ACPI: MADT (v001 DELL    M07     0x27d70202 ASL  0x00000047) @ 0x7fe83000
>ACPI: ASF! (v016 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe82c00
>ACPI: MCFG (v016 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe82fc0
>ACPI: SLIC (v001 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe8309c
>ACPI: TCPA (v001 DELL    M07     0x27d70202 ASL  0x00000061) @ 0x7fe83300
>  >>> ERROR: Invalid checksum
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe81a11
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>Detected 1995.145 MHz processor.
>Built 1 zonelists.  Total pages: 518789
>Kernel command line: ro root=LABEL=/ vga=791 3
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2067036k/2095620k available (2190k kernel code, 27196k reserved, 1158k data, 236k init, 1178116k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623aa2 - 0xc0745494   (1158 kB)
>      .text : 0xc0400000 - 0xc0623aa2   (2190 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 3993.25 BogoMIPS (lpj=1996627)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ac000 soft=c078c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995010)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7983.27 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -1060306 usecs TSC skew, fixed it up.
>CPU#1 had 1060306 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=39
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfac76, last bus=14
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ LMPWR] OemTableId [ DELLLOM] [20060707]
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
>pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
>pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
>pnp: 00:08: ioport range 0x930-0x97f has been reserved
>pnp: 00:0e: ioport range 0xcb0-0xcbb has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ed000000-efefffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: ecf00000-ecffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: ece00000-ecefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: e000-efff
>  MEM window: ecc00000-ecdfffff
>  PREFETCH window: e0000000-e01fffff
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: ecb00000-ecbfffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1486k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1184784954.974:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9677E8E4AACC993
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 262144k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (56 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>Probing IDE interface ide1...
>hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c8]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x04b8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xecb00000 - 0xecbfffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
> Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S3 S4 S5)
>Time: hpet clocksource has been installed.
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>input: PS/2 Mouse as /class/input/input2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb2: configuration #1 chosen from 1 choice
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb3: configuration #1 chosen from 1 choice
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata: 0x170 IDE port busy
>ata: conflict with ide1
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
>ata2: DUMMY
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-8: new high speed USB device using ehci_hcd and address 4
>usb 5-8: configuration #1 chosen from 1 choice
>hub 5-8:1.0: USB hub found
>hub 5-8:1.0: 4 ports detected
>usb 1-2: USB disconnect, address 2
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1184784960.010:2): selinux=0 auid=4294967295
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 3 ports detected
>usb 5-8.1: new high speed USB device using ehci_hcd and address 5
>usb 5-8.1: configuration #1 chosen from 1 choice
>hub 5-8.1:1.0: USB hub found
>hub 5-8.1:1.0: 4 ports detected
>usb 5-8.3: new low speed USB device using ehci_hcd and address 6
>usb 5-8.3: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input4
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-8.3
>input: Logitech USB Receiver as /class/input/input5
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-8.3
>usb 5-8.4: new high speed USB device using ehci_hcd and address 7
>usb 5-8.4: configuration #1 chosen from 1 choice
>usb 2-1.2: new full speed USB device using uhci_hcd and address 4
>usb 2-1.2: configuration #1 chosen from 1 choice
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>tg3.c:v3.72 (January 8, 2007)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:bb:37:3c
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ecbff000-ecbff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>Floppy drive(s): fd0 is 1.44M
>ieee80211_crypt: registered algorithm 'NULL'
>iTCO_vendor_support: vendor-support=0
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
>Linux video capture interface: v2.00
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c5)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[374fc000295e0161]
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: ACPI Dock Station Driver 
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.28 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>Adding 2096440k swap on /dev/sda5.  Priority:-1 extents:1 across:2096440k
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>
>
>*************************************************************************
>
>KERNEL-2.6.22.1-15
>
>hdparm -tT /dev/hda
>
>
>/dev/hda:
> Timing cached reads:   11792 MB in  1.99 seconds = 5916.75 MB/sec
> Timing buffered disk reads:    6 MB in  3.54 seconds =   1.69 MB/sec
>
>
>lsmod
>
>
>Module                  Size  Used by
>autofs4                24773  2 
>hidp                   26689  2 
>rfcomm                 44249  0 
>l2cap                  30401  10 hidp,rfcomm
>bluetooth              57893  5 hidp,rfcomm,l2cap
>sunrpc                161853  1 
>cpufreq_ondemand       12237  1 
>acpi_cpufreq           14409  1 
>dm_mirror              25153  0 
>dm_multipath           21961  0 
>dm_mod                 56961  2 dm_mirror,dm_multipath
>video                  21065  0 
>sbs                    22729  0 
>button                 12113  0 
>bay                    10177  0 
>dock                   13921  1 bay
>battery                14149  0 
>ac                      9285  0 
>lp                     16105  0 
>snd_hda_intel         243417  0 
>snd_seq_dummy           7877  0 
>snd_seq_oss            33473  0 
>snd_seq_midi_event     11073  1 snd_seq_oss
>iwl3945               156965  0 
>snd_usb_audio          79553  0 
>snd_seq                50609  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>joydev                 13825  0 
>snd_pcm_oss            43457  0 
>snd_mixer_oss          19521  1 snd_pcm_oss
>snd_usb_lib            19777  1 snd_usb_audio
>iTCO_wdt               14693  0 
>iTCO_vendor_support     7877  1 iTCO_wdt
>snd_pcm                74949  3 snd_hda_intel,snd_usb_audio,snd_pcm_oss
>mac80211              145865  1 iwl3945
>i2c_i801               12369  0 
>tg3                   104901  0 
>i2c_core               27841  1 i2c_i801
>ide_cd                 40545  0 
>snd_rawmidi            26817  1 snd_usb_lib
>firewire_ohci          20673  0 
>cdrom                  37089  1 ide_cd
>parport_pc             30821  1 
>snd_seq_device         11981  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
>firewire_core          43137  1 firewire_ohci
>snd_timer              24901  2 snd_seq,snd_pcm
>parport                38281  2 lp,parport_pc
>snd_hwdep              13125  1 snd_usb_audio
>crc_itu_t               6337  1 firewire_core
>serio_raw              10821  0 
>cfg80211               12105  1 mac80211
>snd                    53317  11 snd_hda_intel,snd_seq_oss,snd_usb_audio,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq_device,snd_timer,snd_hwdep
>soundcore              11681  1 snd
>snd_page_alloc         13769  2 snd_hda_intel,snd_pcm
>rtc_cmos               12001  0 
>ata_piix               18629  0 
>libata                119985  1 ata_piix
>sd_mod                 31297  0 
>scsi_mod              140621  2 libata,sd_mod
>ext3                  125513  2 
>jbd                    59881  1 ext3
>mbcache                12485  1 ext3
>ehci_hcd               35405  0 
>ohci_hcd               23877  0 
>uhci_hcd               27089  0 
>
>
>dmesg 
>
>
>Linux version 2.6.22.1-15.fc6 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Jul 12 17:58:10 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe81400 (usable)
> BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523905) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523905
>early_node_map[1] active PFN ranges
>    0:        0 ->   523905
>On node 0 totalpages: 523905
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292228 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FC070, 0014 (r0 DELL  )
>ACPI: RSDT 7FE8198A, 0044 (r1 DELL    M07     27D70202 ASL        61)
>ACPI: FACP 7FE82800, 0074 (r1 DELL    M07     27D70202 ASL        61)
>ACPI: DSDT 7FE83400, 5495 (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7FE91C00, 0040
>ACPI: HPET 7FE82F00, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 7FE83000, 0068 (r1 DELL    M07     27D70202 ASL        47)
>ACPI: ASF! 7FE82C00, 005B (r16 DELL    M07     27D70202 ASL        61)
>ACPI: MCFG 7FE82FC0, 003E (r16 DELL    M07     27D70202 ASL        61)
>ACPI: SLIC 7FE8309C, 0176 (r1 DELL    M07     27D70202 ASL        61)
>ACPI: TCPA 7FE83300, 0032 (r1 DELL    M07     27D70202 ASL        61)
>ACPI: SSDT 7FE81A11, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>Built 1 zonelists.  Total pages: 519812
>Kernel command line: ro root=LABEL=/ vga=791
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07be000 soft=c079e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.058 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070956k/2095620k available (2217k kernel code, 23268k reserved, 1180k data, 264k init, 1178116k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0757000 - 0xc0799000   ( 264 kB)
>      .data : 0xc062a54e - 0xc0751584   (1180 kB)
>      .text : 0xc0400000 - 0xc062a54e   (2217 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3993.46 BogoMIPS (lpj=1996732)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bf000 soft=c079f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=1995005)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7983.47 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 4249980780 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 18:37:35  Date: 06/18/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI Warning (tbutils-0158): Incorrect checksum in table [TCPA] -  00, should be AC [20070126]
>ACPI: SSDT 7FE819CE, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:02: ioport range 0x1008-0x100f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
>pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
>pnp: 00:08: ioport range 0x930-0x97f has been reserved
>pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>pnp: 00:0e: ioport range 0xcb0-0xcbb has been reserved
>pnp: 00:0e: iomem range 0xfed40000-0xfed44fff could not be reserved
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ed000000-efefffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: ecf00000-ecffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: ece00000-ecefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: e000-efff
>  MEM window: ecc00000-ecdfffff
>  PREFETCH window: e0000000-e01fffff
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: ecb00000-ecbfffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1501k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1184783855.267:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key C98B12891A0F2669
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 262144k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: SSDT 7FE82138, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE81EED, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FE8237C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE820B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (56 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Clocksource tsc unstable (delta = -101028827 ns)
>hda: Hitachi HTS721010G9SA00, ATA DISK drive
>Probing IDE interface ide1...
>hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 195371568 sectors (100030 MB) w/7538KiB Cache, CHS=16383/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c8]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x04b8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xecb00000 - 0xecbfffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:847:645
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 903k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>hub 1-2:1.0: hub_port_status failed (err = -71)
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
>ata_piix 0000:00:1f.2: 0x170 IDE port busy
>ata_piix 0000:00:1f.2: no available legacy port
>usb 5-8: new high speed USB device using ehci_hcd and address 4
>usb 5-8: configuration #1 chosen from 1 choice
>hub 5-8:1.0: USB hub found
>hub 5-8:1.0: 4 ports detected
>usb 1-2: USB disconnect, address 2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 3 ports detected
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1184783862.766:2): selinux=0 auid=4294967295
>usb 5-8.1: new high speed USB device using ehci_hcd and address 5
>usb 5-8.1: configuration #1 chosen from 1 choice
>hub 5-8.1:1.0: USB hub found
>hub 5-8.1:1.0: 4 ports detected
>usb 5-8.3: new low speed USB device using ehci_hcd and address 6
>usb 5-8.3: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input4
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-8.3
>drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /class/input/input5
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-8.3
>usb 5-8.4: new high speed USB device using ehci_hcd and address 7
>usb 5-8.4: configuration #1 chosen from 1 choice
>usb 2-1.2: new full speed USB device using uhci_hcd and address 3
>usb 2-1.2: configuration #1 chosen from 1 choice
>WARNING: at drivers/usb/core/driver.c:1192 usb_autopm_do_device() (Not tainted)
> [<c058ab17>] usb_autopm_do_device+0x63/0xd9
> [<c058aed4>] usb_suspend_both+0x1fc/0x20c
> [<c058ab76>] usb_autopm_do_device+0xc2/0xd9
> [<c058d1c3>] usb_create_sysfs_intf_files+0x74/0x87
> [<c0589dd3>] usb_set_configuration+0x3c8/0x3f2
> [<c05905cc>] generic_probe+0x18b/0x1db
> [<c058b386>] usb_probe_device+0x32/0x37
> [<c0559657>] driver_probe_device+0xea/0x168
> [<c0625365>] klist_next+0x4b/0x6c
> [<c05596d5>] __device_attach+0x0/0x5
> [<c0558ac3>] bus_for_each_drv+0x39/0x60
> [<c0559767>] device_attach+0x72/0x86
> [<c05596d5>] __device_attach+0x0/0x5
> [<c0558a34>] bus_attach_device+0x26/0x7c
> [<c0558d92>] bus_add_device+0xd0/0x10b
> [<c05579fb>] device_add+0x346/0x526
> [<c0585dea>] usb_new_device+0xa4/0xf1
> [<c0586947>] hub_thread+0x6fd/0xa6a
> [<c0625ce5>] __sched_text_start+0x675/0x714
> [<c043856d>] autoremove_wake_function+0x0/0x35
> [<c058624a>] hub_thread+0x0/0xa6a
> [<c04384a6>] kthread+0x38/0x5e
> [<c043846e>] kthread+0x0/0x5e
> [<c0405b6b>] kernel_thread_helper+0x7/0x10
> =======================
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>Floppy drive(s): fd0 is 1.44M
>intel_rng: FWH not detected
>parport_pc 00:0d: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:bb:37:3c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>firewire_core: created new fw device fw0 (0 config rom retries)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.25kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096440k swap on /dev/hda5.  Priority:-1 extents:1 across:2096440k
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>cdrom: This disc doesn't have any tracks I recognize!
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.

Actions: View

Attachments on bug 248819: 159566