Attachment 159629 Details for Bug 220385 – Kernel dmesg output

Kernel dmesg output

dmesg.txt (text/plain), 36.83 KB, created by Carl Roth on 2007-07-20 03:21:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Carl Roth

Created: 2007-07-20 03:21:49 UTC

Size: 36.83 KB

patch

obsolete

>Linux version 2.6.20-1.2962.fc6 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Jun 19 18:50:05 EDT 2007
>Command line: ro root=/dev/maxtor1/zod64 vga=0x31b video=vesa resume=/dev/maxtor1/swap acpi_sleep=s3_bios
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ed19000 (usable)
> BIOS-e820: 000000003ed19000 - 000000003edec000 (ACPI NVS)
> BIOS-e820: 000000003edec000 - 000000003fea7000 (usable)
> BIOS-e820: 000000003fea7000 - 000000003fee9000 (ACPI NVS)
> BIOS-e820: 000000003fee9000 - 000000003feed000 (usable)
> BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data)
> BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 257305) 1 entries of 3200 used
>Entering add_active_range(0, 257516, 261799) 2 entries of 3200 used
>Entering add_active_range(0, 261865, 261869) 3 entries of 3200 used
>Entering add_active_range(0, 261887, 261888) 4 entries of 3200 used
>end_pfn_map = 261888
>DMI 2.3 present.
>ACPI: RSDP (v000 INTEL                                 ) @ 0x00000000000fe020
>ACPI: RSDT (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fefde48
>ACPI: FADT (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fefcf10
>ACPI: MADT (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fefce10
>ACPI: WDDT (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fef7f90
>ACPI: MCFG (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fef7f10
>ACPI: ASF! (v032 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x000000003fefcd10
>ACPI: SSDT (v001 INTEL  SetupVar 0x000005c4 MSFT 0x01000013) @ 0x000000003fef7e90
>ACPI: DSDT (v001 INTEL  D975XBX  0x000005c4 MSFT 0x01000013) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff00000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 257305) 1 entries of 3200 used
>Entering add_active_range(0, 257516, 261799) 2 entries of 3200 used
>Entering add_active_range(0, 261865, 261869) 3 entries of 3200 used
>Entering add_active_range(0, 261887, 261888) 4 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003ff00000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[5] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   257305
>    0:   257516 ->   261799
>    0:   261865 ->   261869
>    0:   261887 ->   261888
>On node 0 totalpages: 261496
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1321 pages reserved
>  DMA zone: 2614 pages, LIFO batch:0
>  DMA32 zone: 4028 pages used for memmap
>  DMA32 zone: 253469 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Nosave address range: 000000003ed19000 - 000000003edec000
>Nosave address range: 000000003fea7000 - 000000003fee9000
>Nosave address range: 000000003feed000 - 000000003feff000
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 256083
>Kernel command line: ro root=/dev/maxtor1/zod64 vga=0x31b video=vesa resume=/dev/maxtor1/swap acpi_sleep=s3_bios
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1020044k/1047552k available (2456k kernel code, 25940k reserved, 1457k data, 312k init)
>Calibrating delay using timer specific routine.. 6936.98 BogoMIPS (lpj=3468491)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16667624
>Detected 16.667 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x2
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6932.65 BogoMIPS (lpj=3466326)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6932.62 BogoMIPS (lpj=3466310)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU2: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6932.65 BogoMIPS (lpj=3466327)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU3: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>Brought up 4 CPUs
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3466.878 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=8,959
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f could not be reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: 50200000-502fffff
>  PREFETCH window: 40000000-4fffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 50400000-504fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: 50500000-505fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: 2000-2fff
>  MEM window: 50100000-501fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 50000000-500fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2453k freed
>audit: initializing netlink socket (disabled)
>audit(1184899119.873:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3BF7C3DE2E80CC3F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0x40000000, mapped to 0xffffc20000080000, using 10240k, total 16384k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x40b0-0x40b7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: DVDRW IDE H16X, ATAPI CD/DVD-ROM drive
>hda: hw_config=0000
>hda: hw_config=0000
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1042k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50304400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 2-2: USB disconnect, address 2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x40C8 ctl 0x40E6 bmdma 0x40A0 irq 19
>ata2: SATA max UDMA/133 cmd 0x40C0 ctl 0x40E2 bmdma 0x40A8 irq 19
>scsi0 : ata_piix
>usb 5-4: new high speed USB device using ehci_hcd and address 2
>ata1.00: ATA-7, max UDMA/133, 398297088 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>usb 5-4: configuration #1 chosen from 1 choice
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>hub 5-4:1.0: USB hub found
>hub 5-4:1.0: 4 ports detected
>ata2.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BACE PQ: 0 ANSI: 5
>SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 5-4.2: new full speed USB device using ehci_hcd and address 3
> sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L300S0   BACE PQ: 0 ANSI: 5
>SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 5-4.2: configuration #1 chosen from 1 choice
>input: HID 047f:c001 as /class/input/input1
>input: USB HID v1.00 Device [HID 047f:c001] on usb-0000:00:1d.7-4.2
>SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: Attached scsi disk sdb
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>usb 5-4.4: new high speed USB device using ehci_hcd and address 4
>usb 5-4.4: configuration #1 chosen from 1 choice
>hub 5-4.4:1.0: USB hub found
>hub 5-4.4:1.0: 4 ports detected
>snd_hda_codec: Unknown symbol snd_pcm_hw_constraint_list
>snd_hda_codec: Unknown symbol snd_pcm_hw_constraint_step
>snd_hda_codec: Unknown symbol snd_pcm_format_width
>snd_hda_intel: Unknown symbol snd_pcm_new
>snd_hda_intel: Unknown symbol snd_pcm_limit_hw_rates
>snd_hda_intel: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
>snd_hda_intel: Unknown symbol snd_hda_bus_new
>snd_hda_intel: Unknown symbol snd_hda_build_pcms
>snd_hda_intel: Unknown symbol snd_hda_codec_new
>snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event
>snd_hda_intel: Unknown symbol snd_pcm_lib_malloc_pages
>snd_hda_intel: Unknown symbol snd_pcm_lib_ioctl
>snd_hda_intel: Unknown symbol snd_pcm_lib_free_pages
>snd_hda_intel: Unknown symbol snd_hda_calc_stream_format
>snd_hda_intel: Unknown symbol snd_pcm_set_ops
>usb 5-4.4.1: new low speed USB device using ehci_hcd and address 5
>snd_hda_intel: Unknown symbol snd_hda_suspend
>snd_hda_intel: Unknown symbol snd_pcm_suspend_all
>snd_hda_intel: Unknown symbol snd_hda_resume
>snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_integer
>snd_hda_intel: Unknown symbol snd_hda_build_controls
>usb 5-4.4.1: configuration #1 chosen from 1 choice
>input: HID 0430:0005 as /class/input/input2
>input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1d.7-4.4.1
>snd_hda_intel: Unknown symbol snd_pcm_period_elapsed
>usb 5-4.4.2: new low speed USB device using ehci_hcd and address 6
>usb 5-4.4.2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-4.4.2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1651 types, 210 bools, 1 sens, 1024 cats
>security:  60 classes, 56026 rules
>Losing some ticks... checking if CPU frequency changed.
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1184899127.621:2): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input4
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 916 MBytes.
>[fglrx] module loaded - fglrx 8.38.7 [Jun 26 2007] on minor 0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:20:9c:c8
>ieee1394: Initialized config rom entry `ip1394'
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[50004000-500047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sata_sil 0000:05:05.0: version 2.0
>ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix
>ata3: SATA max UDMA/100 cmd 0xFFFFC20000A98880 ctl 0xFFFFC20000A9888A bmdma 0xFFFFC20000A98800 irq 17
>ata4: SATA max UDMA/100 cmd 0xFFFFC20000A988C0 ctl 0xFFFFC20000A988CA bmdma 0xFFFFC20000A98808 irq 17
>ata5: SATA max UDMA/100 cmd 0xFFFFC20000A98A80 ctl 0xFFFFC20000A98A8A bmdma 0xFFFFC20000A98A00 irq 17
>ata6: SATA max UDMA/100 cmd 0xFFFFC20000A98AC0 ctl 0xFFFFC20000A98ACA bmdma 0xFFFFC20000A98A08 irq 17
>scsi2 : sata_sil
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ata3: SATA link down (SStatus 0 SControl 310)
>scsi3 : sata_sil
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>ata4: SATA link down (SStatus 0 SControl 310)
>scsi4 : sata_sil
>ata5: SATA link down (SStatus 0 SControl 310)
>scsi5 : sata_sil
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001996c83]
>ata6: SATA link down (SStatus 0 SControl 310)
>usbcore: registered new interface driver snd-usb-audio
>i2c_adapter i2c-0: lm85: Detected SMSC chip
>i2c_adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85.
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>audit(1184899146.146:3): avc:  denied  { getattr } for  pid=2223 comm="fsck" name=".in_sysinit" dev=tmpfs ino=1737 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>EXT3 FS on dm-6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>audit(1184899154.894:4): avc:  denied  { relabelto } for  pid=2276 comm="cryptsetup" name="luks_crypto_e653943d-0b02-453a-ae45-9c51597cee3f" dev=tmpfs ino=10103 scontext=system_u:system_r:lvm_t:s0 tcontext=system_u:object_r:removable_device_t:s0 tclass=blk_file
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-9, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-10, type ext3), uses xattr
>Adding 3145720k swap on /dev/maxtor1/swap.  Priority:-1 extents:1 across:3145720k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1184899172.732:5): audit_pid=3044 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>i2c /dev entries driver
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[fglrx] total      GART = 130023424
>[fglrx] free       GART = 114032640
>[fglrx] max single GART = 114032640
>[fglrx] total      LFB  = 268304384
>[fglrx] free       LFB  = 243060736
>[fglrx] max single LFB  = 243060736
>[fglrx] total      Inv  = 268435456
>[fglrx] free       Inv  = 268435456
>[fglrx] max single Inv  = 268435456
>[fglrx] total      TIM  = 0
>[fglrx] PCIe has already been initialized. Reinitializing ...
>[fglrx] total      GART = 130023424
>[fglrx] free       GART = 114032640
>[fglrx] max single GART = 114032640
>[fglrx] total      LFB  = 268304384
>[fglrx] free       LFB  = 243060736
>[fglrx] max single LFB  = 243060736
>[fglrx] total      Inv  = 268435456
>[fglrx] free       Inv  = 268435456
>[fglrx] max single Inv  = 268435456
>[fglrx] total      TIM  = 0
>SELinux: initialized (dev 0:1b, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1d, type nfs), uses genfs_contexts
>NET: Unregistered protocol family 31
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[0090270001996c83]
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>CPU1 is down
>CPU 2 is now offline
>CPU2 is down
>Breaking affinity for irq 14
>Breaking affinity for irq 16
>Breaking affinity for irq 17
>Breaking affinity for irq 19
>Breaking affinity for irq 22
>Breaking affinity for irq 23
>CPU 3 is now offline
>SMP alternatives: switching to UP code
>CPU3 is down
>Stopping tasks ... done.
>Shrinking memory...  -\|/-\|/-\|done (125675 pages freed)
>Freed 502700 kbytes in 2.25 seconds (223.42 MB/s)
>Suspending console(s)
>snd-usb-audio 5-4.2:1.0: no suspend for driver snd-usb-audio?
>snd-usb-audio 5-4.2:1.1: no suspend for driver snd-usb-audio?
>snd-usb-audio 5-4.2:1.2: no suspend for driver snd-usb-audio?
>pnp: Device 00:0a disabled.
>pnp: Device 00:09 disabled.
>ACPI: PCI interrupt for device 0000:04:00.0 disabled
>[fglrx] firegl_gps_setpowerdown .
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>swsusp: critical section: 
>swsusp: Need to copy 132887 pages
>swsusp: Not enough free memory
>Error -12 suspending
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 109)
>PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50300004)
>PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 10b)
>PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing 50304400)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[fglrx] firegl_gps_setpowerup .
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18
>pnp: Device 00:09 activated.
>pnp: Device 00:0a activated.
>hda: hw_config=0000
>hda: hw_config=0000
>snd-usb-audio 5-4.2:1.0: no resume for driver snd-usb-audio?
>snd-usb-audio 5-4.2:1.1: no resume for driver snd-usb-audio?
>snd-usb-audio 5-4.2:1.2: no resume for driver snd-usb-audio?
>Restarting tasks ... <6>usb 5-4: USB disconnect, address 2
>usb 5-4.2: USB disconnect, address 3
>usb 5-4.4: USB disconnect, address 4
>usb 5-4.4.1: USB disconnect, address 5
>usb 5-4.4.2: USB disconnect, address 6
>done.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x2
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6932.65 BogoMIPS (lpj=3466326)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>CPU1 is up
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>ata3: SATA link down (SStatus 0 SControl 310)
>ata4: SATA link down (SStatus 0 SControl 310)
>ata5: SATA link down (SStatus 0 SControl 310)
>ata6: SATA link down (SStatus 0 SControl 310)
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6932.62 BogoMIPS (lpj=3466311)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>CPU2 is up
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>usb 5-4: new high speed USB device using ehci_hcd and address 7
>Calibrating delay using timer specific routine.. 6932.81 BogoMIPS (lpj=3466405)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>                   Genuine Intel(R) CPU 3.46GHz stepping 02
>CPU3 is up
>usb 5-4: configuration #1 chosen from 1 choice
>hub 5-4:1.0: USB hub found
>hub 5-4:1.0: 4 ports detected
>usb 5-4.2: new full speed USB device using ehci_hcd and address 8
>usb 5-4.2: configuration #1 chosen from 1 choice
>input: HID 047f:c001 as /class/input/input7
>input: USB HID v1.00 Device [HID 047f:c001] on usb-0000:00:1d.7-4.2
>ata2.00: configured for UDMA/133
>ata1.00: configured for UDMA/133
>usb 5-4.4: new high speed USB device using ehci_hcd and address 9
>SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 5-4.4: configuration #1 chosen from 1 choice
>hub 5-4.4:1.0: USB hub found
>hub 5-4.4:1.0: 4 ports detected
>usb 5-4.4.1: new low speed USB device using ehci_hcd and address 10
>usb 5-4.4.1: configuration #1 chosen from 1 choice
>input: HID 0430:0005 as /class/input/input8
>input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1d.7-4.4.1
>usb 5-4.4.2: new low speed USB device using ehci_hcd and address 11
>usb 5-4.4.2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input9
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-4.4.2
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>input: Power Button (FF) as /class/input/input10
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input11
>ACPI: Sleep Button (CM) [SLPB]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[50004000-500047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001996c83]

Actions: View

Attachments on bug 220385: 159629