Attachment 159636 Details for Bug 155496 – dmesg

dmesg

dmesg.txt (text/plain), 16.40 KB, created by Michael Schwendt on 2007-07-20 09:09:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Schwendt

Created: 2007-07-20 09:09:05 UTC

Size: 16.40 KB

patch

obsolete

>Linux version 2.6.22.1-20.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Jul 12 20:06:57 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
> BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 196592) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   196592
>  HighMem    196592 ->   196592
>early_node_map[1] active PFN ranges
>    0:        0 ->   196592
>On node 0 totalpages: 196592
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1503 pages used for memmap
>  Normal zone: 190993 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FABF0, 0014 (r0 AMI   )
>ACPI: RSDT 2FFF0000, 0028 (r1 AMIINT VIA_K7         10 MSFT       97)
>ACPI: FACP 2FFF0030, 0074 (r1 AMIINT VIA_K7         11 MSFT       97)
>ACPI: DSDT 2FFF00B0, 2ABB (r1    VIA   VT8371     1000 MSFT  100000B)
>ACPI: FACS 2FFF8000, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
>Built 1 zonelists.  Total pages: 195057
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0160e000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0792000 soft=c0772000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1303.081 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 771532k/786368k available (2111k kernel code, 14164k reserved, 1113k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
>    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
>      .init : 0xc072c000 - 0xc076d000   ( 260 kB)
>      .data : 0xc060fd8e - 0xc0726504   (1113 kB)
>      .text : 0xc0400000 - 0xc060fd8e   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2607.41 BogoMIPS (lpj=1303709)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e20)
>CPU0: AMD Duron(tm) stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time:  8:18:44  Date: 06/20/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb61, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-08ff claimed by vt82c586 ACPI
>PCI quirk: region 0c00-0c7f claimed by vt82c686 HW-mon
>PCI quirk: region 0400-040f claimed by vt82c686 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: dee00000-dfefffff
>  PREFETCH window: dac00000-decfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2830k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1184919524.142:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4CC2A71854BDF601
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>PCI: Disabling Via external APIC routing
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Thermal Zone [THRM] (54 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 671 not supported
>Using IPI No-Shortcut mode
>  Magic number: 15:625:321
>  hash matches device tty46
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 863k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.3: UHCI Host Controller
>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:07.3: irq 10, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:07.1: version 0.3.1
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>input: PS/2 Generic Mouse as /class/input/input2
>ata1.00: ATA-6: ST340015A, 3.01, max UDMA/100
>ata1.00: 78165360 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/66
>ata2.00: ATA-5: ST320423A, 3.02, max UDMA/66
>ata2.00: 40011300 sectors, multi 32: LBA 
>ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
>ata2.00: configured for UDMA/66
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST340015A        3.01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST320423A        3.02 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 40011300 512-byte hardware sectors (20486 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 40011300 512-byte hardware sectors (20486 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1184919531.141:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>FDC 0 is a post-1991 82077
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport_pc: VIA parallel port: io=0x378, irq=7
>ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>eth0: RealTek RTL-8029 found at 0xcc00, IRQ 10, 00:E0:7D:A0:FA:12.
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:0d.0: Try the "8139too" driver instead.
>Linux video capture interface: v2.00
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>eth1: RealTek RTL8139 at 0xf098af00, 00:40:f4:b0:90:ad, IRQ 9
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>bttv0: Bt878 (rev 2) at 0000:00:0c.0, irq: 11, latency: 64, mmio: 0xdedfe000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>tveeprom 1-0050: Hauppauge model 61334, rev B1  , serial# 3164091
>tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5)
>tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
>tveeprom 1-0050: audio processor is MSP3415 (idx 6)
>tveeprom 1-0050: has radio
>bttv0: Hauppauge eeprom indicates model#61334
>bttv0: using tuner=5
>bt878: Unknown symbol bttv_read_gpio
>bt878: Unknown symbol bttv_write_gpio
>bt878: Unknown symbol bttv_gpio_enable
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp3400 1-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw])
>msp3400 1-0040: MSP3410D-B4 supports nicam, mode is autodetect
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>loop: module loaded
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>md: md0 stopped.
>md: bind<sdb6>
>md: bind<sda6>
>md: raid1 personality registered for level 1
>raid1: raid set md0 active with 2 out of 2 mirrors
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda11, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1574324k swap on /dev/sda12.  Priority:-1 extents:1 across:1574324k
>eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1184919564.370:3): audit_pid=1777 old=0 by auid=4294967295
>eth1: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized mga 3.2.1 20051102 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>[drm] Initialized card for AGP DMA.

Actions: View

Attachments on bug 155496: 113437 | 123385 | 159636 | 159637 | 161932