Attachment 159660 Details for Bug 249045 – dmesg

dmesg

knurd_d630_dmesg (text/plain), 31.02 KB, created by Thorsten Leemhuis on 2007-07-20 15:03:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thorsten Leemhuis

Created: 2007-07-20 15:03:59 UTC

Size: 31.02 KB

patch

obsolete

>Linux version 2.6.22.1-27.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jul 17 17:19:58 EDT 2007
>Command line: ro root=/dev/system/root1 nohpet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f680400 (usable)
> BIOS-e820: 000000007f680400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521856) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FBB00, 0024 (r2 DELL  )
>ACPI: XSDT 7F681E00, 0064 (r1 DELL    M08     27D70607 ASL        61)
>ACPI: FACP 7F681C9C, 00F4 (r4 DELL    M08     27D70607 ASL        61)
>ACPI: DSDT 7F682400, 6122 (r2 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7F690C00, 0040
>ACPI: HPET 7F681F00, 0038 (r1 DELL    M08            1 ASL        61)
>ACPI: APIC 7F682000, 0068 (r1 DELL    M08     27D70607 ASL        47)
>ACPI: ASF! 7F681C00, 007E (r32 DELL    M08     27D70607 ASL        61)
>ACPI: MCFG 7F681FC0, 003E (r16 DELL    M08     27D70607 ASL        61)
>ACPI: SLIC 7F68209C, 0176 (r1 DELL    M08     27D70607 ASL        61)
>ACPI: TCPA 7F682300, 0032 (r1                        0 ASL         0)
>ACPI: SSDT 7F6806EF, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f680000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521856) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f680000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521856
>On node 0 totalpages: 521759
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1300 pages reserved
>  DMA zone: 2643 pages, LIFO batch:0
>  DMA32 zone: 7078 pages used for memmap
>  DMA32 zone: 510682 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 513325
>Kernel command line: ro root=/dev/system/root1 nohpet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 1995.061 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2049124k/2087424k available (2366k kernel code, 37912k reserved, 1401k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3992.97 BogoMIPS (lpj=1996487)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12469123
>Detected 12.469 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.41 BogoMIPS (lpj=1994706)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f8000000 - fbffffff
>ACPI: SSDT 7F690C80, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>pnp: 00:05: ioport range 0xc80-0xcaf has been reserved
>pnp: 00:05: ioport range 0xcc0-0xcff could not be reserved
>pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved
>pnp: 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:0b: ioport range 0x900-0x97f has been reserved
>pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:0b: ioport range 0x1008-0x100f has been reserved
>pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:0c: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:0c: ioport range 0x1060-0x107f has been reserved
>pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:0c: ioport range 0x1010-0x102f has been reserved
>pnp: 00:0d: iomem range 0x0-0x9efff could not be reserved
>pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: fe700000-fe7fffff
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: fe600000-fe6fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3754k freed
>audit: initializing netlink socket (disabled)
>audit(1184942050.679:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 88A06E0E2D36A1D0
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F6810F6, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7F680BBB, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F68137C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7F681071, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to possible TSC halt in C2
>Time: acpi_pm clocksource has been installed.
>ACPI: Thermal Zone [THM] (31 C)
>hpet_acpi_add: no address or irqs in _CRS
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.2
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 4 ports detected
>usb 5-1.2: new full speed USB device using uhci_hcd and address 4
>usb 5-1.2: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc2000034a900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata2: DUMMY
>ata3: SATA max UDMA/133 cmd 0xffffc2000034aa00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: ST980813AS, 3.ADB, max UDMA/133
>ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST980813AS       3.AD PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1184942062.758:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1823 types, 80 bools, 1 sens, 1024 cats
>security:  61 classes, 68337 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1184942063.010:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>Floppy drive(s): fd0 is 1.44M
>scsi4 : ata_piix
>ata4: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000016fa0 irq 14
>ata5: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000016fa8 irq 15
>ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T11N, A103, max UDMA/33
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-T11N A103 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:db:6a:6e
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.36kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries)
>hda_intel: azx_get_response timeout, switching to polling mode...
>floppy0: no floppy controllers found
>hda_intel: azx_get_response timeout, switching to single_cmd mode...
>hda_codec: No auto-config is available, default to model=ref
>hda-intel: no codecs initialized
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>loop: module loaded
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
>ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>Adding 2096440k swap on /dev/sda7.  Priority:-1 extents:1 across:2096440k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>audit(1184942091.858:4): audit_pid=1990 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>ata1.00: exception Emask 0x2 SAct 0x39 SErr 0x0 action 0x2 frozen
>ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x39 FIS=004040a1:00000004)
>ata1.00: cmd 60/08:00:2f:00:04/00:00:01:00:00/40 tag 0 cdb 0x0 data 4096 in
>         res 40/00:28:47:00:04/00:00:01:00:00/40 Emask 0x2 (HSM violation)
>ata1.00: cmd 60/08:18:37:00:04/00:00:01:00:00/40 tag 3 cdb 0x0 data 4096 in
>         res 40/00:28:47:00:04/00:00:01:00:00/40 Emask 0x2 (HSM violation)
>ata1.00: cmd 60/08:20:3f:00:04/00:00:01:00:00/40 tag 4 cdb 0x0 data 4096 in
>         res 40/00:28:47:00:04/00:00:01:00:00/40 Emask 0x2 (HSM violation)
>ata1.00: cmd 60/08:28:47:00:04/00:00:01:00:00/40 tag 5 cdb 0x0 data 4096 in
>         res 40/00:28:47:00:04/00:00:01:00:00/40 Emask 0x2 (HSM violation)
>ata1: soft resetting port
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen
>ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x4 FIS=004040a1:00000002)
>ata1.00: cmd 60/04:10:0b:b2:02/00:00:00:00:00/40 tag 2 cdb 0x0 data 2048 in
>         res 40/00:10:0b:b2:02/00:00:00:00:00/40 Emask 0x2 (HSM violation)
>ata1: soft resetting port
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x0 action 0x2 frozen
>ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x1 FIS=004040a1:00000008)
>ata1.00: cmd 60/60:00:3f:1d:24/00:00:01:00:00/40 tag 0 cdb 0x0 data 49152 in
>         res 40/00:00:3f:1d:24/00:00:01:00:00/40 Emask 0x2 (HSM violation)
>ata1: soft resetting port
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>eth0: no IPv6 routers present
>ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
>ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18 FIS=004040a1:00000006)
>ata1.00: cmd 61/08:18:47:82:92/00:00:03:00:00/40 tag 3 cdb 0x0 data 4096 out
>         res 40/00:20:3f:83:92/00:00:03:00:00/40 Emask 0x2 (HSM violation)
>ata1.00: cmd 61/08:20:3f:83:92/00:00:03:00:00/40 tag 4 cdb 0x0 data 4096 out
>         res 40/00:20:3f:83:92/00:00:03:00:00/40 Emask 0x2 (HSM violation)
>ata1: soft resetting port
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>psmouse.c: GlidePoint at isa0060/serio1/input0 lost sync at byte 2
>psmouse.c: GlidePoint at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
>psmouse.c: resync failed, issuing reconnect request
>ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
>ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18 FIS=004040a1:00000006)
>ata1.00: cmd 61/08:18:ff:47:3d/00:00:01:00:00/40 tag 3 cdb 0x0 data 4096 out
>         res 40/00:20:a7:b1:bb/00:00:02:00:00/40 Emask 0x2 (HSM violation)
>ata1.00: cmd 61/08:20:a7:b1:bb/00:00:02:00:00/40 tag 4 cdb 0x0 data 4096 out
>         res 40/00:20:a7:b1:bb/00:00:02:00:00/40 Emask 0x2 (HSM violation)
>ata1: soft resetting port
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Actions: View

Attachments on bug 249045: 159660 | 159661