Attachment 159719 Details for Bug 249139 – dmesg output

dmesg output

bootup (text/plain), 18.63 KB, created by Iain Anderson on 2007-07-21 12:05:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Iain Anderson

Created: 2007-07-21 12:05:27 UTC

Size: 18.63 KB

patch

obsolete

>Linux version 2.6.23-0.35.rc0.git6.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070704 (Red Hat 4.1.2-15)) #1 SMP Thu Jul 19 18:52:05 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017fdb000 (usable)
> BIOS-e820: 0000000017fdb000 - 0000000018000000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>383MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 98267) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    98267
>  HighMem     98267 ->    98267
>early_node_map[1] active PFN ranges
>    0:        0 ->    98267
>On node 0 totalpages: 98267
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 1195 pages used for memmap
>  Normal zone: 92976 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F4040, 0014 (r0 DELL  )
>ACPI: RSDT 17FF0000, 0028 (r1 DELL    CPi R   27D2051C ASL        61)
>ACPI: FACP 17FF0400, 0074 (r1 DELL    CPi R   27D2051C ASL        61)
>ACPI: DSDT 17FF0800, 29A6 (r1 INT430 SYSFexxx     1001 MSFT  100000D)
>ACPI: FACS 17FFF800, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 20000000 (gap: 18000000:e7e00000)
>Built 1 zonelists.  Total pages: 97020
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (014f0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 497.843 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 992 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 376880k/393068k available (2206k kernel code, 15564k reserved, 1175k data, 268k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
>    lowmem  : 0xc0000000 - 0xd7fdb000   ( 383 MB)
>      .init : 0xc0753000 - 0xc0796000   ( 268 kB)
>      .data : 0xc062799a - 0xc074d984   (1175 kB)
>      .text : 0xc0400000 - 0xc062799a   (2206 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 997.22 BogoMIPS (lpj=498613)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0820)
>CPU0: Intel Pentium III (Coppermine) stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=2864 bytes
>Time: 11:12:11  Date: 06/21/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc0ae, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-083f claimed by PIIX4 ACPI
>PCI quirk: region 0840-084f claimed by PIIX4 SMB
>PIIX4 devres B PIO at 00e0-00e7
>PIIX4 devres C PIO at 0850-085f
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 has been reserved
>pnp: 00:02: ioport range 0x808-0x80f has been reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x850-0x853 has been reserved
>pnp: 00:03: ioport range 0x856-0x85f has been reserved
>pnp: 00:03: ioport range 0x810-0x83f has been reserved
>pnp: 00:03: ioport range 0x840-0x84f has been reserved
>pnp: 00:03: ioport range 0x600-0x67f has been reserved
>pnp: 00:03: ioport range 0x680-0x6ff has been reserved
>pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:04: iomem range 0xed000000-0xedffffff has been reserved
>pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fc000000-feffffff
>  PREFETCH window: 30000000-300fffff
>PCI: Bus 2, cardbus bridge: 0000:00:03.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:03.1
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 28000000-2bffffff
>  MEM window: 2c000000-2fffffff
>PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 589824 bytes)
>TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3563k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1185016334.346:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8B4E67D017ACCF72
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THM] (45 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:03.0 [1028:00aa]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000020
>Yenta: CardBus bridge found at 0000:00:03.1 [1028:00aa]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000020
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:915:226
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 268k freed
>Write protecting the kernel read-only data: 897k
>pccard: CardBus card inserted into slot 0
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>pccard: CardBus card inserted into slot 1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>input: DualPoint Stick as /class/input/input2
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Clocksource tsc unstable (delta = -279132470 ns)
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:07.1: version 2.11
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00010860 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00010868 irq 15
>ata1.00: ATA-5: HITACHI_DK23BA-20, 00E0A0D2, max UDMA/66
>ata1.00: 39070080 sectors, multi 8: LBA 
>ata1.00: configured for UDMA/33
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4240N, D110, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23BA-2 00E0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4240N D110 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1185016343.340:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  6 users, 11 roles, 2259 types, 98 bools, 1 sens, 1024 cats
>security:  61 classes, 190155 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1185016346.339:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>parport_pc 00:0e: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Loaded prism54 driver, version 1.2
>PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others.
>0000:02:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at d8940000.
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>es1968: clocking to 48000
>FDC 0 is a post-1991 82077
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>audit(1185016379.122:4): avc:  denied  { write } for  pid=1118 comm="Xorg" name="/" dev=ramfs ino=4426 scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:ramfs_t:s0 tclass=dir
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: ACPI Dock Station Driver 
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 786424k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:786424k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
>eth0: resetting device...
>eth0: uploading firmware...
>eth0: firmware version: 1.0.4.3
>eth0: firmware upload complete
>eth0: interface reset complete
>eth0: no IPv6 routers present
>eth1:  setting full-duplex.
>audit(1185016472.608:5): audit_pid=1984 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth1: no IPv6 routers present
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: timeout waiting for mgmt response 1000, triggering device
>eth1: no IPv6 routers present
>eth0: timeout waiting for mgmt response 1000, triggering device
>eth0: timeout waiting for mgmt response 1000, triggering device
>eth0: timeout waiting for mgmt response 1000, triggering device
>eth0: timeout waiting for mgmt response 1000, triggering device
>eth0: timeout waiting for mgmt response 900, triggering device
>eth0: timeout waiting for mgmt response 1000, triggering device

Actions: View

Attachments on bug 249139: 159719