Attachment 159744 Details for Bug 249166 – dmesg and fdisk contents 2.6.22 and 2.6.21 kernel

dmesg and fdisk contents 2.6.22 and 2.6.21 kernel

dmesg_fdisk_both_kernels.txt (text/plain), 41.64 KB, created by Daniel Duggan on 2007-07-22 14:11:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Duggan

Created: 2007-07-22 14:11:33 UTC

Size: 41.64 KB

patch

obsolete

>###############################################################################################################################################################
>dmesg booting from the kernel-2.6.21-1.3228
>###############################################################################################################################################################
>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 15:37:31 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
>copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7580, 0014 (r0 IntelR)
>ACPI: RSDT 3FFF3000, 0028 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 3BAF (r1 INTELR AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 3FFF0000, 0040
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 260081
>Kernel command line: ro root=LABEL=/ nodmraid rhgb quiet
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1818.030 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031608k/1048512k available (2066k kernel code, 16108k reserved, 1092k data, 240k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604bc2 - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604bc2   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3638.24 BogoMIPS (lpj=1819124)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 00003080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 1eb8)
>CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
>SMP motherboard not detected.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time:  9:44:23  Date: 06/22/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:00: iomem range 0xd7e00-0xd7fff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x400-0x4bf could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e0000000-e1ffffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: e2000000-e3ffffff
>  PREFETCH window: 50000000-500fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2810k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1185097463.174:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 949CEA51B56F22EC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (33 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:296:728
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
>PCI: setting IRQ 4 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 4, io base 0x0000b000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 7, io base 0x0000b800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>ohci_hcd 0000:02:02.0: OHCI Host Controller
>ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:02:02.0: irq 3, io mem 0xe3003000
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1f.2-2
>input: Logitech Logitech USB Keyboard as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1f.2-2
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:02.1 to 64
>ohci_hcd 0000:02:02.1: OHCI Host Controller
>ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:02:02.1: irq 10, io mem 0xe3000000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.2[C] -> Link [LNK0] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:02:02.2 to 64
>ehci_hcd 0000:02:02.2: EHCI Host Controller
>ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:02:02.2: irq 9, io mem 0xe3001000
>ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 117266688, hpa_sectors = 117266688
>ata1.00: ATA-5: MAXTOR 6L060L3, A93.0500, max UDMA/133
>ata1.00: 117266688 sectors, multi 16: LBA 
>ata1.01: ata_hpa_resize 1: sectors = 60058656, hpa_sectors = 60058656
>ata1.01: ATA-7: Maxtor 6E030L0, NAR61EA0, max UDMA/133
>ata1.01: 60058656 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 117266688, hpa_sectors = 117266688
>ata1.00: configured for UDMA/100
>ata1.01: ata_hpa_resize 1: sectors = 60058656, hpa_sectors = 60058656
>ata1.01: configured for UDMA/100
>scsi1 : ata_piix
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>ata2.00: ATAPI, max UDMA/33
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /class/input/input3
>input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:02:02.1-2
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      MAXTOR 6L060L3   A93. PQ: 0 ANSI: 5
>SCSI device sda: 117266688 512-byte hdwr sectors (60041 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 117266688 512-byte hdwr sectors (60041 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6E030L0   NAR6 PQ: 0 ANSI: 5
>SCSI device sdb: 60058656 512-byte hdwr sectors (30750 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 60058656 512-byte hdwr sectors (30750 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 0:0:1:0: Attached scsi disk sdb
>scsi 1:0:0:0: CD-ROM            JLMS     XJ-HD163         GH5S PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1185097476.672:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>input: PC Speaker as /class/input/input4
>intel8x0_measure_ac97_clock: measured 51005 usecs
>intel8x0: clocking to 48000
>pata_hpt37x: BIOS has not set timing clocks.
>hpt37x: HPT372: Bus clock 33MHz.
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ata3: PATA max UDMA/133 cmd 0x00019400 ctl 0x00019802 bmdma 0x0001a400 irq 11
>ata4: PATA max UDMA/133 cmd 0x00019c00 ctl 0x0001a002 bmdma 0x0001a408 irq 11
>scsi2 : pata_hpt37x
>ata3.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
>ata3.00: ATA-6: WDC WD400BB-00FJA0, 13.03G13, max UDMA/100
>ata3.00: 78165360 sectors, multi 16: LBA 
>Find mode for 12 reports C829C62
>Find mode for DMA 69 reports 1C6DDC62
>ata3.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
>ata3.00: configured for UDMA/100
>scsi3 : pata_hpt37x
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>via-rhine: Broken BIOS detected, avoid_D3 enabled.
>ata4.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
>ata4.00: ATA-6: WDC WD400BB-00FJA0, 13.03G13, max UDMA/100
>ata4.00: 78165360 sectors, multi 16: LBA 
>Find mode for 12 reports C829C62
>Find mode for DMA 69 reports 1C6DDC62
>ata4.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
>ata4.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD400BB-00FJ 13.0 PQ: 0 ANSI: 5
>SCSI device sdc: 78165360 512-byte hdwr sectors (40021 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 78165360 512-byte hdwr sectors (40021 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: Attached scsi disk sdc
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD400BB-00FJ 13.0 PQ: 0 ANSI: 5
>SCSI device sdd: 78165360 512-byte hdwr sectors (40021 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 78165360 512-byte hdwr sectors (40021 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: Attached scsi disk sdd
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:03.0 to 64
>eth0: VIA Rhine III at 0xe3002000, 00:15:e9:2f:56:35, IRQ 10.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
>loop: loaded (max 8 devices)
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>fuse distribution version: 2.6.5
>Adding 2047712k swap on /dev/sdb5.  Priority:-1 extents:1 across:2047712k
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>###############################################################################################################################################################
># fdisk -l
>
>Disk /dev/sda: 60.0 GB, 60040544256 bytes
>255 heads, 63 sectors/track, 7299 cylinders
>Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sda1   *           1        2550    20482843+   7  HPFS/NTFS
>/dev/sda2            2551        7298    38138310    f  W95 Ext'd (LBA)
>/dev/sda5            2551        5100    20482843+   7  HPFS/NTFS
>/dev/sda6            5101        6375    10241406    7  HPFS/NTFS
>/dev/sda7            6376        7298     7413966    b  W95 FAT32
>
>Disk /dev/sdb: 30.7 GB, 30750031872 bytes
>16 heads, 63 sectors/track, 59582 cylinders
>Units = cylinders of 1008 * 512 = 516096 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sdb1   *           1         203      102280+  83  Linux
>/dev/sdb2             204       31138    15591240   83  Linux
>/dev/sdb3           31139       55519    12288024   83  Linux
>/dev/sdb4           55520       59582     2047752    5  Extended
>/dev/sdb5           55520       59582     2047720+  82  Linux swap / Solaris
>
>Disk /dev/sdc: 40.0 GB, 40020664320 bytes
>255 heads, 63 sectors/track, 4865 cylinders
>Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sdc1   *           1        4865    39078081    b  W95 FAT32
>
>Disk /dev/sdd: 40.0 GB, 40020664320 bytes
>255 heads, 63 sectors/track, 4865 cylinders
>Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sdd1               1        4865    39078081   83  Linux
>###############################################################################################################################################################
>dmesg booting from the kernel-2.6.22.1-27
>###############################################################################################################################################################
>Linux version 2.6.22.1-27.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jul 17 17:13:26 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7580, 0014 (r0 IntelR)
>ACPI: RSDT 3FFF3000, 0028 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 3BAF (r1 INTELR AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 3FFF0000, 0040
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 260081
>Kernel command line: ro root=LABEL=/ nodmraid rhgb quiet
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0792000 soft=c0772000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1818.126 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031532k/1048512k available (2111k kernel code, 16196k reserved, 1114k data, 260k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072c000 - 0xc076d000   ( 260 kB)
>      .data : 0xc060fcf6 - 0xc0726504   (1114 kB)
>      .text : 0xc0400000 - 0xc060fcf6   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3638.38 BogoMIPS (lpj=1819193)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 0000b080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 1eb8)
>CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
>SMP motherboard not detected.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time:  9:48:57  Date: 06/22/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:00: iomem range 0xd7e00-0xd7fff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x400-0x4bf could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e0000000-e1ffffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: e2000000-e3ffffff
>  PREFETCH window: 50000000-500fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2817k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1185097737.177:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 46DA39B2D4D596FA
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (36 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 845G Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:399:829
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 863k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
>PCI: setting IRQ 4 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 4, io base 0x0000b000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 7, io base 0x0000b800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>ohci_hcd 0000:02:02.0: OHCI Host Controller
>ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:02:02.0: irq 3, io mem 0xe3003000
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1f.2-2
>input: Logitech Logitech USB Keyboard as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1f.2-2
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:02.1 to 64
>ohci_hcd 0000:02:02.1: OHCI Host Controller
>ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:02:02.1: irq 10, io mem 0xe3000000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.2[C] -> Link [LNK0] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:02:02.2 to 64
>ehci_hcd 0000:02:02.2: EHCI Host Controller
>ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:02:02.2: irq 9, io mem 0xe3001000
>ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>ata1.00: ATA-5: MAXTOR 6L060L3, A93.0500, max UDMA/133
>ata1.00: 117266688 sectors, multi 16: LBA 
>ata1.01: ATA-7: Maxtor 6E030L0, NAR61EA0, max UDMA/133
>ata1.01: 60058656 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>usb 4-2: new low speed USB device using ohci_hcd and address 2
>ata2.00: ATAPI: JLMS    XJ-HD163, GH5S, max UDMA/33
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /class/input/input3
>input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:02:02.1-2
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      MAXTOR 6L060L3   A93. PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117266688 512-byte hardware sectors (60041 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117266688 512-byte hardware sectors (60041 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6E030L0   NAR6 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 60058656 512-byte hardware sectors (30750 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 60058656 512-byte hardware sectors (30750 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            JLMS     XJ-HD163         GH5S PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1185097749.676:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>iTCO_vendor_support: vendor-support=0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>intel_rng: FWH not detected
>hpt37x: DPLL did not stabilize.
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>via-rhine: Broken BIOS detected, avoid_D3 enabled.
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:03.0 to 64
>eth0: VIA Rhine III at 0xe3002000, 00:15:e9:2f:56:35, IRQ 10.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50061 usecs
>intel8x0: clocking to 48000
>loop: module loaded
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>Adding 2047712k swap on /dev/sdb5.  Priority:-1 extents:1 across:2047712k
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>###############################################################################################################################################################
># fdisk -l
>
>Disk /dev/sda: 60.0 GB, 60040544256 bytes
>255 heads, 63 sectors/track, 7299 cylinders
>Units = cylinders of 16065 * 512 = 8225280 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sda1   *           1        2550    20482843+   7  HPFS/NTFS
>/dev/sda2            2551        7298    38138310    f  W95 Ext'd (LBA)
>/dev/sda5            2551        5100    20482843+   7  HPFS/NTFS
>/dev/sda6            5101        6375    10241406    7  HPFS/NTFS
>/dev/sda7            6376        7298     7413966    b  W95 FAT32
>
>Disk /dev/sdb: 30.7 GB, 30750031872 bytes
>16 heads, 63 sectors/track, 59582 cylinders
>Units = cylinders of 1008 * 512 = 516096 bytes
>
>   Device Boot      Start         End      Blocks   Id  System
>/dev/sdb1   *           1         203      102280+  83  Linux
>/dev/sdb2             204       31138    15591240   83  Linux
>/dev/sdb3           31139       55519    12288024   83  Linux
>/dev/sdb4           55520       59582     2047752    5  Extended
>/dev/sdb5           55520       59582     2047720+  82  Linux swap / Solaris
>###############################################################################################################################################################

Actions: View

Attachments on bug 249166: 159744