Attachment 159749 Details for Bug 249209 – dmesg log

dmesg log

dmesg.epsilon (text/plain), 18.64 KB, created by Andrew Clayton on 2007-07-22 17:22:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Clayton

Created: 2007-07-22 17:22:52 UTC

Size: 18.64 KB

patch

obsolete

>Linux version 2.6.22.1-27.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jul 17 17:13:26 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002eff0000 (usable)
> BIOS-e820: 000000002eff0000 - 000000002effffc0 (ACPI data)
> BIOS-e820: 000000002effffc0 - 000000002f000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>751MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 192496) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   192496
>  HighMem    192496 ->   192496
>early_node_map[1] active PFN ranges
>    0:        0 ->   192496
>On node 0 totalpages: 192496
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1471 pages used for memmap
>  Normal zone: 186929 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000E5010, 0014 (r0 OID_00)
>ACPI: RSDT 2EFFFBC0, 0030 (r1 INSYDE RSDT_000        1 _CSI    10101)
>ACPI: FACP 2EFFFAC0, 0074 (r1 INSYDE FACP_000      100 _CSI    10101)
>ACPI: DSDT 2EFFBAE0, 3FD7 (r1 FUJITS EF4           419 MSFT  100000D)
>ACPI: FACS 2EFFFFC0, 0040
>ACPI: BOOT 2EFFFB50, 0028 (r1 INSYDE SYS_BOOT      100 _CSI    10101)
>ACPI: DBGP 2EFFFB80, 0034 (r1 INSYDE DBGP_000      100 _CSI    10101)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 2f000000:d0f80000)
>Built 1 zonelists.  Total pages: 190993
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (015ee000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0792000 soft=c0772000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2392.588 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 755276k/769984k available (2111k kernel code, 14036k reserved, 1114k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xef800000 - 0xff7fe000   ( 255 MB)
>    lowmem  : 0xc0000000 - 0xeeff0000   ( 751 MB)
>      .init : 0xc072c000 - 0xc076d000   ( 260 kB)
>      .data : 0xc060fcf6 - 0xc0726504   (1114 kB)
>      .text : 0xc0400000 - 0xc060fcf6   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4788.63 BogoMIPS (lpj=2394318)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf1ff 00000000 00000000 0000b080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: Intel Mobile Intel(R) Celeron(R) CPU 2.40GHz stepping 09
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 16:49:55  Date: 06/22/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe8964, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 *9 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *10 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 *10 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>PCI: setting IRQ 13 as level-triggered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:03: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:05: ioport range 0x330-0x331 has been reserved
>pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:05: ioport range 0x1000-0x107f has been reserved
>pnp: 00:05: ioport range 0x1400-0x140f has been reserved
>pnp: 00:05: ioport range 0x600-0x60f has been reserved
>pnp: 00:05: iomem range 0xffc00000-0xfff7ffff has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: e0000000-efffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 34000000-37ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 38000000-3bffffff
>  MEM window: 3c000000-3fffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2828k freed
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1185122995.107:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 46DA39B2D4D596FA
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 16 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>ACPI: Thermal Zone [TZN0] (52 C)
>isapnp: Scanning for PnP cards...
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA P4M266x/P4N266 chipset
>agpgart: AGP aperture is 64M @ 0xa0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:0a.0 [10cf:10e7]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x08b8, PCI irq 9
>Socket status: 30000006
>Yenta: CardBus bridge found at 0000:00:0a.1 [10cf:10e7]
>Yenta: ISA IRQ mask 0x08b8, PCI irq 9
>Socket status: 30000006
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:144:844
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 863k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:11.2: irq 10, io base 0x00001200
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:11.3: irq 10, io base 0x00001300
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.4: UHCI Host Controller
>uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:11.4: irq 10, io base 0x00001700
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:11.1: version 0.3.1
>ACPI: Unable to derive IRQ for device 0000:00:11.1
>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b4cb1, caps: 0x88479b/0x0
>serio: Synaptics pass-through port at isa0060/serio4/input0
>ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: QSI CD-ROM SCR-242, CJCC, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
>scsi 1:0:0:0: CD-ROM            QSI      CD-ROM SCR-242   CJCC PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1185123000.948:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1817 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 67727 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1185123001.448:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x2f8-0x2ff 0x378-0x37f
>cs: IO port probe 0x100-0x3af: excluding 0x2f8-0x2ff 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>sr0: scsi-1 drive
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>NET: Registered protocol family 23
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:0d.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>eth0: RealTek RTL8139 at 0xef84e000, 00:e0:00:9b:92:b3, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8139C'
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
>firewire_core: created new fw device fw0 (0 config rom retries)
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>MC'97 0 converters and GPIO not ready (0x1)
>loop: module loaded
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>audit(1185123024.030:4): avc:  denied  { getattr } for  pid=1060 comm="rhgb" name="TrueType" dev=sda1 ino=958707 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:user_home_t:s0 tclass=dir
>audit(1185123024.030:5): avc:  denied  { read } for  pid=1060 comm="rhgb" name="TrueType" dev=sda1 ino=958707 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:user_home_t:s0 tclass=dir
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Error installing notify handler
>Device 'dock.0' does not have a release() function, it is broken and must be fixed.
>WARNING: at drivers/base/core.c:107 device_release() (Not tainted)
> [<c04e9b67>] kobject_cleanup+0x3d/0x54
> [<c04e9b7e>] kobject_release+0x0/0x8
> [<c04ea71e>] kref_put+0x72/0x7f
> [<c055abd8>] platform_device_del+0x13/0x3d
> [<efbcb768>] find_dock+0x21f/0x249 [dock]
> [<c051f25a>] acpi_ns_walk_namespace+0x102/0x11c
> [<c051da88>] acpi_walk_namespace+0x57/0x74
> [<efbcb549>] find_dock+0x0/0x249 [dock]
> [<ef81e03c>] dock_init+0x3c/0x55 [dock]
> [<efbcb549>] find_dock+0x0/0x249 [dock]
> [<c0445a64>] sys_init_module+0x1699/0x17d2
> [<c05572d3>] device_remove_file+0x0/0x25
> [<c060e0a6>] do_page_fault+0x273/0x516
> [<c047acc6>] vfs_read+0xa6/0x158
> [<c0404f8e>] syscall_call+0x7/0xb
> =======================
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 522104k swap on /dev/sda2.  Priority:-1 extents:1 across:522104k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 249209: 159749 | 203551