Attachment 159838 Details for Bug 249383 – dmesg output from working system

dmesg output from working system

dmesg (text/plain), 25.60 KB, created by Ian Kent on 2007-07-24 07:52:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ian Kent

Created: 2007-07-24 07:52:05 UTC

Size: 25.60 KB

patch

obsolete

>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 14:56:37 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noapic
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
> BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FAC60, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFB0000, 0030 (r1 A M I  OEMRSDT  12000506 MSFT       97)
>ACPI: FACP 3FFB0200, 0084 (r2 A M I  OEMFACP  12000506 MSFT       97)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
>ACPI: DSDT 3FFB03F0, 46F0 (r1  A0347 A0347001        1 INTL  2002026)
>ACPI: FACS 3FFBE000, 0040
>ACPI: APIC 3FFB0390, 005C (r1 A M I  OEMAPIC  12000506 MSFT       97)
>ACPI: OEMB 3FFBE040, 0046 (r1 A M I  AMI_OEM  12000506 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000003ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000003ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   262064
>On node 0 totalpages: 261967
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1280 pages reserved
>  DMA zone: 2663 pages, LIFO batch:0
>  DMA32 zone: 3526 pages used for memmap
>  DMA32 zone: 254442 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.1
>MPTABLE: OEM ID: ASUSTeK  MPTABLE: Product ID:  MPTABLE: APIC at: 0xFEE00000
>I/O APIC #1 at 0xFEC00000.
>Setting APIC routing to physical flat
>Processors: 1
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 257105
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noapic
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1800.101 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>CPU 0: aperture @ d0000000 size 256 MB
>Memory: 1022872k/1048256k available (2321k kernel code, 24996k reserved, 1377k data, 316k init)
>Calibrating delay using timer specific routine.. 3601.18 BogoMIPS (lpj=1800591)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c28)
>Using local APIC timer interrupts.
>result 12500708
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>Time:  7:30:15  Date: 06/24/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>PCI: Cannot allocate resource region 0 of device 0000:05:0c.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 256M @ 0xd0000000
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>pnp: 00:08: iomem range 0xff780000-0xffffffff could not be reserved
>pnp: 00:08: iomem range 0xf0000000-0xf7ffffff has been reserved
>pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fa900000-fe9fffff
>  PREFETCH window: 9ff00000-bfefffff
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:00.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:13.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Error while updating region 0000:05:0c.0/0 (fea00000 != 7ea00000)
>PCI: Bridge: 0000:00:13.1
>  IO window: c000-cfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>PCI: Setting latency timer of device 0000:00:13.1 to 64
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3754k freed
>audit: initializing netlink socket (disabled)
>audit(1185262215.424:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8061118429C58D90
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie00]
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.1:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 16 throttling states)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>  Magic number: 15:28:522
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>logips2pp: Detected unknown logitech mouse model 127
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 3, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SCSI subsystem initialized
>libata version 2.20 loaded.
>pata_via 0000:00:0f.1: version 0.2.1
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>scsi0 : pata_via
>ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
>ata1.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
>ata1.00: configured for UDMA/100
>scsi1 : pata_via
>ata2.00: ATAPI, max UDMA/33
>ata2.01: ATAPI, max UDMA/33
>ata2.00: device is on DMA blacklist, disabling DMA
>ata2.00: configured for PIO4
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            ATAPI    CD-ROM DRIVE-40X N0AP PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
>ahci 0000:00:0f.0: version 2.1
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
>ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata3: SATA max UDMA/133 cmd 0xffffc2000001ed00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 10
>ata4: SATA max UDMA/133 cmd 0xffffc2000001ed80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 10
>ata5: SATA max UDMA/133 cmd 0xffffc2000001ee00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 10
>ata6: SATA max UDMA/133 cmd 0xffffc2000001ee80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 10
>scsi2 : ahci
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: WDC WD1600JS-60MHB1, 10.02E02, max UDMA/100
>ata3.00: 312581808 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/100
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600JS-60M 10.0 PQ: 0 ANSI: 5
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
>sd 2:0:0:0: Attached scsi disk sdb
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1823 types, 80 bools, 1 sens, 1024 cats
>security:  61 classes, 68365 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1185262228.555:2): policy loaded auid=4294967295
>audit(1185262232.826:3): avc:  denied  { getattr } for  pid=461 comm="cp" name="nvidia0" dev=dm-0 ino=1966163 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=chr_file
>audit(1185262232.826:4): avc:  denied  { create } for  pid=461 comm="cp" name="nvidia0" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=chr_file
>audit(1185262232.826:5): avc:  denied  { setattr } for  pid=461 comm="cp" name="nvidia0" dev=tmpfs ino=1858 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:etc_t:s0 tclass=chr_file
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>gameport: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xcc00, speed 1044kHz
>input: PC Speaker as /class/input/input3
>EDAC MC: Ver: 2.0.1 Jun 12 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0xfebff400, 00:00:00:00:01:f8, IRQ 11.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
>nvidia: no version for "struct_module" found: kernel tainted.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.11  Wed Jun 13 16:33:22 PDT 2007
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1185262254.975:6): avc:  denied  { read } for  pid=1812 comm="dhclient" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:dhcpc_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262254.975:7): avc:  denied  { getattr } for  pid=1812 comm="dhclient" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:dhcpc_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262256.225:8): avc:  denied  { read } for  pid=1978 comm="syslogd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:syslogd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262256.225:9): avc:  denied  { getattr } for  pid=1978 comm="syslogd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:syslogd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262257.025:10): avc:  denied  { read } for  pid=2043 comm="rpc.statd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:rpcd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262257.025:11): avc:  denied  { getattr } for  pid=2043 comm="rpc.statd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:rpcd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>/dev/vmmon[2095]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2095]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2118 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2131 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>audit(1185262260.053:12): avc:  denied  { read } for  pid=2215 comm="automount" name="auto.master" dev=dm-0 ino=1838213 scontext=system_u:system_r:automount_t:s0 tcontext=user_u:object_r:tmp_t:s0 tclass=file
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ppdev: user-space parallel port driver
>audit(1185262261.718:13): avc:  denied  { read } for  pid=2278 comm="cupsd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>/dev/vmnet: open called by PID 2309 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2310 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2341 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2362 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>audit(1185262262.932:14): avc:  denied  { read } for  pid=2389 comm="ntpd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:ntpd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262262.932:15): avc:  denied  { getattr } for  pid=2389 comm="ntpd" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:ntpd_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>eth0: no IPv6 routers present
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>audit(1185262285.207:16): avc:  denied  { read } for  pid=2884 comm="dhclient" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:dhcpc_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>audit(1185262285.208:17): avc:  denied  { getattr } for  pid=2884 comm="dhclient" name="services" dev=dm-0 ino=197280 scontext=system_u:system_r:dhcpc_t:s0 tcontext=user_u:object_r:rpm_script_tmp_t:s0 tclass=file
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>eth0: no IPv6 routers present
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 3-2: USB disconnect, address 2
>bibblepro[3309]: segfault at 000000000002c610 rip 00000000003bbf71 rsp 00000000ffb5f374 error 4
>bibblepro[3307]: segfault at 000000000002c610 rip 00000000003bbf71 rsp 00000000ff99b0b4 error 4
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions

Actions: View

Attachments on bug 249383: 159838 | 159839 | 159840 | 159841