Attachment 159894 Details for Bug 249482 – dmesg output showing suspend and resume

dmesg output showing suspend and resume

dmesg-24-07-2007 (text/plain), 52.90 KB, created by Adam Huffman on 2007-07-24 22:58:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adam Huffman

Created: 2007-07-24 22:58:51 UTC

Size: 52.90 KB

patch

obsolete

>Linux version 2.6.22.1-33.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Jul 23 16:59:15 EDT 2007
>Command line: ro root=/dev/vg00/root rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
> BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521840) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F63B0, 0014 (r0 PTLTD )
>ACPI: RSDT 7F6764AD, 0048 (r1   Sony       N0 20070412 PTL         0)
>ACPI: FACP 7F67DDDE, 0084 (r2   Sony       N0 20070412 PTL        5A)
>ACPI: DSDT 7F677E33, 5FAB (r1   Sony       N0 20070412 PTL   100000E)
>ACPI: FACS 7F67EFC0, 0040
>ACPI: APIC 7F67DE62, 0068 (r1   Sony       N0 20070412 PTL        5A)
>ACPI: BOOT 7F67DFD8, 0028 (r1   Sony       N0 20070412 PTL         1)
>ACPI: MCFG 7F67DF02, 003C (r1   Sony       N0 20070412 PTL        5A)
>ACPI: TCPA 7F67DF3E, 0032 (r1   Sony       N0 20070412 PTL      5A52)
>ACPI: APIC 7F67DF70, 0068 (r1   Sony       N0 20070412 PTL         0)
>ACPI: SSDT 7F6776B1, 077E (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: SSDT 7F676EE6, 07CB (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: SSDT 7F6764F5, 04E2 (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f670000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521840) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f670000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521840
>On node 0 totalpages: 521743
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1300 pages reserved
>  DMA zone: 2643 pages, LIFO batch:0
>  DMA32 zone: 7078 pages used for memmap
>  DMA32 zone: 510666 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 513309
>Kernel command line: ro root=/dev/vg00/root rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2000.169 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2049032k/2087360k available (2361k kernel code, 37940k reserved, 1401k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4003.15 BogoMIPS (lpj=2001578)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10417536
>Detected 10.417 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3999.70 BogoMIPS (lpj=1999850)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: Please test with "acpi_osi=!Linux"
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: d6000000-d7ffffff
>  PREFETCH window: d0000000-d1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: dc100000-dc1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 3000-3fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: d2000000-d3ffffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 4000-4fff
>  MEM window: da000000-dbffffff
>  PREFETCH window: d4000000-d5ffffff
>PCI: Bus 10, cardbus bridge: 0000:09:04.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: dc000000-dc0fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3791k freed
>Simple Boot Flag at 0x37 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1185320584.528:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 84686AF648AEAA42
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F676C73, 01EA (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: SSDT 7F6769D7, 0217 (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F676E5D, 0089 (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: SSDT 7F676BEE, 0085 (r1   Sony       N0 20070412 PTL  20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to possible TSC halt in C2
>Time: acpi_pm clocksource has been installed.
>ACPI: Thermal Zone [ATF0] (56 C)
>ACPI: Thermal Zone [DTS0] (61 C)
>ACPI: Thermal Zone [DTS1] (57 C)
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15
>ata1.00: ATAPI: MATSHITADVD-RAM UJ-832S, 1.70, max UDMA/33
>usb 5-4: new high speed USB device using ehci_hcd and address 2
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-832S  1.70 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
>ata_piix 0000:00:1f.2: invalid MAP value 0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x00000000000118d0 ctl 0x00000000000118c6 bmdma 0x00000000000118b0 irq 22
>ata4: SATA max UDMA/133 cmd 0x00000000000118c8 ctl 0x00000000000118c2 bmdma 0x00000000000118b8 irq 22
>usb 5-4: configuration #1 chosen from 1 choice
>ata3.00: ATA-7: ST9100824AS, 3.14, max UDMA/133
>ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST9100824AS      3.14 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Sony     USB   HS-CARD    4.52 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1185320598.587:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1827 types, 80 bools, 1 sens, 1024 cats
>security:  61 classes, 68495 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1185320598.875:3): policy loaded auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI version 1.10
>usbcore: registered new interface driver hci_usb
>tpm_inf_pnp 00:07: Found TPM with ID IFX0102
>tpm_inf_pnp 00:07: TPM found: config base 0x2e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
>audit(1185317003.532:4): avc:  denied  { mount } for  pid=1112 comm="modprobe" name="/" dev=securityfs ino=1 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>sky2 0000:07:00.0: v1.14 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1
>sky2 eth0: addr 00:13:a9:8c:3d:7c
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.36kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>firewire_core: created new fw device fw0 (0 config rom retries)
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>kvm: disabled by bios
>loop: module loaded
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: ACPI Dock Station Driver 
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>Adding 2097144k swap on /dev/vg00/swap.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>audit(1185317028.111:5): audit_pid=2163 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 4K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>iwl3945: REPLY_ADD_STA failed
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:7f:69:12:4e
>wlan0: RX authentication from 00:14:7f:69:12:4e (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:7f:69:12:4e
>wlan0: RX AssocResp from 00:14:7f:69:12:4e (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:14:7f:69:12:4e)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: duplicate address detected!
>Freeing alive inet6 address ffff810056cd3800
>wlan0: deauthenticate(reason=3)
>sky2 eth0: disabling interface
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:06:00.0 disabled
>ACPI: PCI interrupt for device 0000:09:04.2 disabled
>ehci_hcd 0000:00:1d.7: remove, state 1
>usb usb5: USB disconnect, address 1
>usb 5-4: USB disconnect, address 2
>usb 5-6: USB disconnect, address 4
>ehci_hcd 0000:00:1d.7: USB bus 5 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.36kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>usb 2-2: configuration #1 chosen from 1 choice
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>usb 3-2:1.0: suspend
>usb 3-2: suspend
>usb-storage 2-2:1.0: suspend
>usb 2-2: suspend
>platform dock.0: suspend
>platform bluetooth: suspend
>rtc rtc0: class suspend
>platform iTCO_wdt: suspend
>usb 4-2:1.2: suspend
>hci_usb 4-2:1.1: suspend
>hci_usb 4-2:1.0: suspend
>usb 4-2: suspend
>usb 3-1:1.0: suspend
>usb 3-1: suspend, may wakeup
>sd 2:0:0:0: suspend
>sd 2:0:0:0: [sda] Synchronizing SCSI cache
>sd 2:0:0:0: [sda] Stopping disk
>sr 0:0:0:0: suspend
>hub 4-0:1.0: suspend
>usb usb4: suspend, may wakeup
>hub 3-0:1.0: suspend
>usb usb3: suspend, may wakeup
>hub 2-0:1.0: suspend
>usb usb2: suspend, may wakeup
>hub 1-0:1.0: suspend
>usb usb1: suspend, may wakeup
>psmouse serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>pci_express 0000:00:1c.3:pcie03: suspend
>pci_express 0000:00:1c.3:pcie02: suspend
>pci_express 0000:00:1c.3:pcie00: suspend
>pci_express 0000:00:1c.2:pcie03: suspend
>pci_express 0000:00:1c.2:pcie02: suspend
>pci_express 0000:00:1c.2:pcie00: suspend
>pci_express 0000:00:1c.1:pcie03: suspend
>pci_express 0000:00:1c.1:pcie02: suspend
>pci_express 0000:00:1c.1:pcie00: suspend
>pci_express 0000:00:1c.0:pcie03: suspend
>pci_express 0000:00:1c.0:pcie02: suspend
>pci_express 0000:00:1c.0:pcie00: suspend
>platform pcspkr: suspend
>i8042 aux 00:0a: suspend
>i8042 kbd 00:09: suspend
>pnp 00:08: suspend
>tpm_inf_pnp 00:07: suspend
>rtc_cmos 00:06: suspend, may wakeup
>system 00:05: suspend
>pnp 00:04: suspend
>pnp 00:03: suspend
>pnp 00:02: suspend
>system 00:01: suspend
>pnp 00:00: suspend
>pci 0000:09:04.2: suspend
>firewire_ohci 0000:09:04.1: suspend
>yenta_cardbus 0000:09:04.0: suspend
>sky2 0000:07:00.0: suspend
>iwl3945 0000:06:00.0: suspend
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:06:00.0 disabled
>i801_smbus 0000:00:1f.3: suspend
>ata_piix 0000:00:1f.2: suspend
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ata_piix 0000:00:1f.1: suspend
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>pci_set_power_state(): 0000:00:1f.1: state=3, current state=5
>pci 0000:00:1f.0: suspend
>pci 0000:00:1e.0: suspend
>pci 0000:00:1d.7: suspend, may wakeup
>uhci_hcd 0000:00:1d.3: suspend
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>uhci_hcd 0000:00:1d.2: suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: suspend
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pcieport-driver 0000:00:1c.3: suspend
>pcieport-driver 0000:00:1c.2: suspend
>pcieport-driver 0000:00:1c.1: suspend
>pcieport-driver 0000:00:1c.0: suspend
>HDA Intel 0000:00:1b.0: suspend
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>pci 0000:00:02.1: suspend
>pci 0000:00:02.0: suspend
>agpgart-intel 0000:00:00.0: suspend
>thermal thermal:03: suspend
>thermal thermal:02: suspend
>thermal thermal:01: suspend
>acpi thermal:00: suspend
>acpi device:51: suspend
>acpi device:50: suspend
>acpi device:4f: suspend
>acpi device:4e: suspend
>acpi device:4d: suspend
>acpi device:4c: suspend
>acpi device:4b: suspend
>acpi device:4a: suspend
>acpi device:49: suspend
>acpi device:48: suspend
>acpi device:47: suspend
>acpi device:46: suspend
>acpi SNY9001:00: suspend
>acpi PNP0303:00: suspend
>acpi SNY5001:00: suspend
>acpi SNY6001:00: suspend
>acpi IFX0102:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0C02:01: suspend
>acpi PNP0C04:00: suspend
>acpi PNP0000:00: suspend
>acpi INT0800:00: suspend
>acpi PNP0200:00: suspend
>ac ACPI0003:00: suspend
>battery PNP0C0A:00: suspend
>ec PNP0C09:00: suspend
>pci_link PNP0C0F:07: suspend
>pci_link PNP0C0F:06: suspend
>pci_link PNP0C0F:05: suspend
>pci_link PNP0C0F:04: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi device:45: suspend
>acpi device:44: suspend
>acpi device:43: suspend
>acpi device:42: suspend
>acpi device:41: suspend
>acpi device:40: suspend
>acpi device:3f: suspend
>acpi device:3e: suspend
>acpi device:3d: suspend
>acpi device:3c: suspend
>acpi device:3b: suspend
>acpi device:3a: suspend
>acpi device:39: suspend
>acpi device:38: suspend
>acpi device:37: suspend
>acpi device:36: suspend
>acpi device:35: suspend
>acpi device:34: suspend
>acpi device:33: suspend
>acpi device:32: suspend
>acpi device:31: suspend
>acpi device:30: suspend
>acpi device:2f: suspend
>acpi device:2e: suspend
>acpi device:2d: suspend
>acpi device:2c: suspend
>acpi device:2b: suspend
>acpi device:2a: suspend
>acpi device:29: suspend
>acpi device:28: suspend
>acpi device:27: suspend
>acpi device:26: suspend
>acpi device:25: suspend
>acpi device:24: suspend
>acpi device:23: suspend
>acpi device:22: suspend
>acpi device:21: suspend
>acpi device:20: suspend
>acpi device:1f: suspend
>acpi device:1e: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>acpi device:01: suspend
>acpi PNP0C02:00: suspend
>pci_root PNP0A08:00: suspend
>button PNP0C0C:00: suspend
>button PNP0C0D:00: suspend
>acpi device:00: suspend
>processor ACPI0007:01: suspend
>processor ACPI0007:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>Broke affinity for irq 9
>Broke affinity for irq 19
>Broke affinity for irq 22
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>PM: Entering mem sleep
>platform dock.0: LATE suspend
>platform bluetooth: LATE suspend
>platform iTCO_wdt: LATE suspend
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>platform pcspkr: LATE suspend
>pci 0000:09:04.2: LATE suspend
>firewire_ohci 0000:09:04.1: LATE suspend
>yenta_cardbus 0000:09:04.0: LATE suspend
>sky2 0000:07:00.0: LATE suspend
>iwl3945 0000:06:00.0: LATE suspend
>i801_smbus 0000:00:1f.3: LATE suspend
>pci 0000:00:1f.0: LATE suspend
>pci 0000:00:1e.0: LATE suspend
>pci 0000:00:1d.7: LATE suspend, may wakeup
>pcieport-driver 0000:00:1c.3: LATE suspend
>pcieport-driver 0000:00:1c.2: LATE suspend
>pcieport-driver 0000:00:1c.1: LATE suspend
>pcieport-driver 0000:00:1c.0: LATE suspend
>HDA Intel 0000:00:1b.0: LATE suspend
>pci 0000:00:02.1: LATE suspend
>pci 0000:00:02.0: LATE suspend
>agpgart-intel 0000:00:00.0: LATE suspend
>Back to C!
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:02.0: EARLY resume
>pci 0000:00:02.1: EARLY resume
>HDA Intel 0000:00:1b.0: EARLY resume
>pcieport-driver 0000:00:1c.0: EARLY resume
>pcieport-driver 0000:00:1c.1: EARLY resume
>pcieport-driver 0000:00:1c.2: EARLY resume
>pcieport-driver 0000:00:1c.3: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.1: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>uhci_hcd 0000:00:1d.3: EARLY resume
>pci 0000:00:1d.7: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.1: EARLY resume
>ata_piix 0000:00:1f.2: EARLY resume
>i801_smbus 0000:00:1f.3: EARLY resume
>iwl3945 0000:06:00.0: EARLY resume
>sky2 0000:07:00.0: EARLY resume
>yenta_cardbus 0000:09:04.0: EARLY resume
>firewire_ohci 0000:09:04.1: EARLY resume
>pci 0000:09:04.2: EARLY resume
>platform pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>platform iTCO_wdt: EARLY resume
>platform bluetooth: EARLY resume
>platform dock.0: EARLY resume
>PM: Finishing wakeup.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3999.77 BogoMIPS (lpj=1999888)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>CPU1 is up
>acpi acpi_system:00: resuming
>processor ACPI0007:00: resuming
>processor ACPI0007:01: resuming
>acpi device:00: resuming
>button PNP0C0D:00: resuming
>button PNP0C0C:00: resuming
>pci_root PNP0A08:00: resuming
>acpi PNP0C02:00: resuming
>acpi device:01: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi device:1e: resuming
>acpi device:1f: resuming
>acpi device:20: resuming
>acpi device:21: resuming
>acpi device:22: resuming
>acpi device:23: resuming
>acpi device:24: resuming
>acpi device:25: resuming
>acpi device:26: resuming
>acpi device:27: resuming
>acpi device:28: resuming
>acpi device:29: resuming
>acpi device:2a: resuming
>acpi device:2b: resuming
>acpi device:2c: resuming
>acpi device:2d: resuming
>acpi device:2e: resuming
>acpi device:2f: resuming
>acpi device:30: resuming
>acpi device:31: resuming
>acpi device:32: resuming
>acpi device:33: resuming
>acpi device:34: resuming
>acpi device:35: resuming
>acpi device:36: resuming
>acpi device:37: resuming
>acpi device:38: resuming
>acpi device:39: resuming
>acpi device:3a: resuming
>acpi device:3b: resuming
>acpi device:3c: resuming
>acpi device:3d: resuming
>acpi device:3e: resuming
>acpi device:3f: resuming
>acpi device:40: resuming
>acpi device:41: resuming
>acpi device:42: resuming
>acpi device:43: resuming
>acpi device:44: resuming
>acpi device:45: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>pci_link PNP0C0F:07: resuming
>ec PNP0C09:00: resuming
>battery PNP0C0A:00: resuming
>ac ACPI0003:00: resuming
>acpi PNP0200:00: resuming
>acpi INT0800:00: resuming
>acpi PNP0000:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0C02:01: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0100:00: resuming
>acpi IFX0102:00: resuming
>acpi SNY6001:00: resuming
>acpi SNY5001:00: resuming
>acpi PNP0303:00: resuming
>acpi SNY9001:00: resuming
>acpi device:46: resuming
>acpi device:47: resuming
>acpi device:48: resuming
>acpi device:49: resuming
>acpi device:4a: resuming
>acpi device:4b: resuming
>acpi device:4c: resuming
>acpi device:4d: resuming
>acpi device:4e: resuming
>acpi device:4f: resuming
>acpi device:50: resuming
>acpi device:51: resuming
>acpi thermal:00: resuming
>thermal thermal:01: resuming
>thermal thermal:02: resuming
>thermal thermal:03: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:02.0: resuming
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.1: resuming
>HDA Intel 0000:00:1b.0: resuming
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>pcieport-driver 0000:00:1c.0: resuming
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.1: resuming
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcieport-driver 0000:00:1c.2: resuming
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcieport-driver 0000:00:1c.3: resuming
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>uhci_hcd 0000:00:1d.0: resuming
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: resuming
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.3: resuming
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb4: root hub lost power or was reset
>pci 0000:00:1d.7: resuming
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.1: resuming
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata_piix 0000:00:1f.2: resuming
>ata2: port disabled. ignoring.
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>i801_smbus 0000:00:1f.3: resuming
>iwl3945 0000:06:00.0: resuming
>Coming out of suspend...
>PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Grabbing access while already held at line 830.
>iwl3945: Grabbing access while already held at line 830.
>sky2 0000:07:00.0: resuming
>yenta_cardbus 0000:09:04.0: resuming
>firewire_ohci 0000:09:04.1: resuming
>ata3.00: configured for UDMA/133
>sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>pci 0000:09:04.2: resuming
>pnp 00:00: resuming
>system 00:01: resuming
>pnp 00:02: resuming
>pnp 00:03: resuming
>pnp 00:04: resuming
>system 00:05: resuming
>rtc_cmos 00:06: resuming
>tpm_inf_pnp 00:07: resuming
>pnp: Failed to activate device 00:07.
>pnp 00:08: resuming
>i8042 kbd 00:09: resuming
>i8042 aux 00:0a: resuming
>platform pcspkr: resuming
>pci_express 0000:00:1c.0:pcie00: resuming
>pci_express 0000:00:1c.0:pcie02: resuming
>pci_express 0000:00:1c.0:pcie03: resuming
>pci_express 0000:00:1c.1:pcie00: resuming
>pci_express 0000:00:1c.1:pcie02: resuming
>pci_express 0000:00:1c.1:pcie03: resuming
>pci_express 0000:00:1c.2:pcie00: resuming
>pci_express 0000:00:1c.2:pcie02: resuming
>pci_express 0000:00:1c.2:pcie03: resuming
>pci_express 0000:00:1c.3:pcie00: resuming
>pci_express 0000:00:1c.3:pcie02: resuming
>pci_express 0000:00:1c.3:pcie03: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>psmouse serio1: resuming
>ata1.00: configured for UDMA/33
>usb usb1: resuming
>hub 1-0:1.0: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>usb usb3: resuming
>hub 3-0:1.0: resuming
>usb usb4: resuming
>hub 4-0:1.0: resuming
>sr 0:0:0:0: resuming
>sd 2:0:0:0: resuming
>sd 2:0:0:0: [sda] Starting disk
>usb 3-1: resuming
>usb_endpoint usbdev3.2_ep00: PM: resume from 0, parent 3-1 still 2
>usb 3-1:1.0: PM: resume from 2, parent 3-1 still 2
>usb 3-1:1.0: resuming
>usb_endpoint usbdev3.2_ep81: PM: resume from 0, parent 3-1:1.0 still 2
>usb_endpoint usbdev3.2_ep02: PM: resume from 0, parent 3-1:1.0 still 2
>usb_endpoint usbdev3.2_ep83: PM: resume from 0, parent 3-1:1.0 still 2
>usb_device usbdev3.2: PM: resume from 0, parent 3-1 still 2
>usb 4-2: resuming
>usb_endpoint usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 2
>hci_usb 4-2:1.0: PM: resume from 2, parent 4-2 still 2
>hci_usb 4-2:1.0: resuming
>usb_endpoint usbdev4.2_ep81: PM: resume from 0, parent 4-2:1.0 still 2
>usb_endpoint usbdev4.2_ep02: PM: resume from 0, parent 4-2:1.0 still 2
>usb_endpoint usbdev4.2_ep82: PM: resume from 0, parent 4-2:1.0 still 2
>hci_usb 4-2:1.1: PM: resume from 2, parent 4-2 still 2
>hci_usb 4-2:1.1: resuming
>usb 4-2:1.2: PM: resume from 2, parent 4-2 still 2
>usb 4-2:1.2: resuming
>usb_device usbdev4.2: PM: resume from 0, parent 4-2 still 2
>platform iTCO_wdt: resuming
>rtc rtc0: class resume
>platform bluetooth: resuming
>usb_endpoint usbdev4.2_ep03: PM: resume from 0, parent 4-2:1.1 still 2
>usb_endpoint usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.1 still 2
>bluetooth hci0: PM: resume from 0, parent 4-2:1.0 still 2
>platform dock.0: resuming
>usb 2-2: resuming
>usb_endpoint usbdev2.3_ep00: PM: resume from 0, parent 2-2 still 2
>usb-storage 2-2:1.0: PM: resume from 2, parent 2-2 still 2
>usb-storage 2-2:1.0: resuming
> host5: PM: resume from 0, parent 2-2:1.0 still 2
>usb_endpoint usbdev2.3_ep02: PM: resume from 0, parent 2-2:1.0 still 2
>usb_endpoint usbdev2.3_ep82: PM: resume from 0, parent 2-2:1.0 still 2
>usb_device usbdev2.3: PM: resume from 0, parent 2-2 still 2
>usb 3-2: resuming
>usb_endpoint usbdev3.3_ep00: PM: resume from 0, parent 3-2 still 2
>usb 3-2:1.0: PM: resume from 2, parent 3-2 still 2
>usb 3-2:1.0: resuming
>usb_endpoint usbdev3.3_ep81: PM: resume from 0, parent 3-2:1.0 still 2
>usb_endpoint usbdev3.3_ep86: PM: resume from 0, parent 3-2:1.0 still 2
>usb_device usbdev3.3: PM: resume from 0, parent 3-2 still 2
>Restarting tasks ... <6>usb 2-2: USB disconnect, address 3
>done.
>usb 2-2: new full speed USB device using uhci_hcd and address 4
>usb 2-2: configuration #1 chosen from 1 choice
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb 3-1: USB disconnect, address 2
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 3-2: USB disconnect, address 3
>ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>usb 4-2: USB disconnect, address 2
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 4K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 2-2: USB disconnect, address 4
>usb 5-4: new high speed USB device using ehci_hcd and address 2
>usb 5-4: configuration #1 chosen from 1 choice
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 5
>usb 3-1: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>usb-storage: device scan complete
>scsi 7:0:0:0: Direct-Access     Sony     USB   HS-CARD    4.52 PQ: 0 ANSI: 0
>sd 7:0:0:0: [sdb] Attached SCSI removable disk
>sd 7:0:0:0: Attached scsi generic sg2 type 0
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:06:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.36kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>iwl3945: REPLY_ADD_STA failed
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:bf:6c:5a:a4
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: authenticate with AP 00:14:bf:6c:5a:a4
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: authenticate with AP 00:14:bf:6c:5a:a4
>wlan0: RX authentication from 00:14:bf:6c:5a:a4 (alg=0 transaction=2 status=1)
>wlan0: AP denied authentication (auth_alg=0 code=1)
>wlan0: authentication with AP 00:14:bf:6c:5a:a4 timed out
>sky2 eth0: disabling interface
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 4K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sony-laptop: Sony Programmable IO Control Driver v0.5.
>sony-laptop: detected Type3 model
>input: Sony Vaio Keys as /class/input/input6
>input: Sony Vaio Jogdial as /class/input/input7
>sony-laptop: device allocated minor is 62
>sony-laptop: Sony Notebook Control Driver v0.5.
>iwl3945: REPLY_ADD_STA failed
>wlan0: RX deauthentication from 00:14:bf:6c:5a:a4 (reason=7)

Actions: View

Attachments on bug 249482: 159894