Attachment 160110 Details for Bug 231084 – dmesg > dmesg.log

dmesg > dmesg.log

dmesg.log (text/plain), 17.50 KB, created by Ramsey Haddad on 2007-07-27 12:17:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ramsey Haddad

Created: 2007-07-27 12:17:24 UTC

Size: 17.50 KB

patch

obsolete

>Linux version 2.6.20-1.2962.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Jun 19 18:24:12 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000fff0000 size: 0000000000003000 end: 000000000fff3000 type: 4
>copy_e820_map() start: 000000000fff3000 size: 000000000000d000 end: 0000000010000000 type: 3
>copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 65520) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    65520
>  HighMem     65520 ->    65520
>early_node_map[1] active PFN ranges
>    0:        0 ->    65520
>On node 0 totalpages: 65520
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 599 pages used for memmap
>  Normal zone: 60825 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 P4X266                                ) @ 0x000f7440
>ACPI: RSDT (v001 P4X266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
>ACPI: FADT (v001 P4X266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
>ACPI: DSDT (v001 P4X266 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
>Detected 2019.952 MHz processor.
>Built 1 zonelists.  Total pages: 64881
>Kernel command line: ro root=LABEL=/ quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0128a000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079a000 soft=c077a000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 253056k/262080k available (2157k kernel code, 8456k reserved, 1127k data, 232k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
>      .init : 0xc073b000 - 0xc0775000   ( 232 kB)
>      .data : 0xc061b632 - 0xc0735494   (1127 kB)
>      .text : 0xc0400000 - 0xc061b632   (2157 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4043.04 BogoMIPS (lpj=2021521)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 128K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf1ff 00000000 00000000 00003080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0e20)
>CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x400-0x47f could not be reserved
>pnp: 00:02: ioport range 0x500-0x50f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e0000000-e7ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 5, 163840 bytes)
>TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1359k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1185538069.665:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 514EF64DC05D34A7
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: Fan [FAN] (on)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (44 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA P4X266 chipset
>agpgart: AGP aperture is 64M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: WDC WD1200JB-00GVA0, ATA DISK drive
>hdb: WDC WD400EB-00CPF0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive
>hdd: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63<6>hda: hw_config=603b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>hdb: max request size: 128KiB
>hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63<6>hdb: hw_config=6b00
>, UDMA(100)
>hdb: cache flushes not supported
> hdb: hdb1
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 819k
>Time: acpi_pm clocksource has been installed.
>firmware_class: attempt to set timeout to 10
>input: GenPS/2 Genius Mouse as /class/input/input2
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:11.2: irq 10, io base 0x0000d800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:11.3: irq 10, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1185538077.117:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1648 types, 210 bools, 1 sens, 1024 cats
>security:  60 classes, 55884 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1185538077.438:3): policy loaded auid=4294967295
>drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
>drivers/usb/input/hid-core.c: timeout initializing reports
>input: Logitech Logitech Attack 3 as /class/input/input3
>input: USB HID v1.10 Joystick [Logitech Logitech Attack 3] on usb-0000:00:11.2-2
>gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 852kHz
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>NET: Registered protocol family 23
>input: PC Speaker as /class/input/input4
>Linux Tulip driver version 1.1.14 (May 11, 2002)
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>tulip0:  MII transceiver #1 config 3100 status 7869 advertising 05e1.
>eth0: ADMtek Comet rev 17 at MMIO 0xef000000, 00:12:17:4E:13:07, IRQ 10.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda2, type ext3), uses xattr
>Adding 16763788k swap on /dev/hda5.  Priority:-1 extents:1 across:16763788k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
>0000:00:0a.0: tulip_stop_rxtx() failed
>eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
>eth0: no IPv6 routers present
>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>hda: drive_cmd: error=0x04 { DriveStatusError }
>ide: failed opcode was: 0xb0
>hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>hdb: drive_cmd: error=0x04 { DriveStatusError }
>ide: failed opcode was: 0xb0
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
>audit(1185537603.599:4): avc:  denied  { write } for  pid=1187 comm="sendmail" name="input" dev=hda3 ino=11109208 scontext=system_u:system_r:system_mail_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_spool_t:s0 tclass=dir
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
>psmouse.c: bad data from KBC - bad parity
>psmouse.c: Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.

Actions: View

Attachments on bug 231084: 150344 | 150345 | 150346 | 150347 | 150348 | 160110 | 160111