Attachment 160185 Details for Bug 242572 – dmesg output of patched r8169 driver

dmesg output of patched r8169 driver

dmesg_2.6.23-rc1-UP_r8169patched (text/plain), 14.72 KB, created by Thomas Müller on 2007-07-29 11:46:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Müller

Created: 2007-07-29 11:46:58 UTC

Size: 14.72 KB

patch

obsolete

>Linux version 2.6.23-rc1-UP_r8169patched (thomas@linux.local.loc) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 Sun Jul 29 12:16:06 CEST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffec000 (usable)
> BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data)
> BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved)
> BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Entering add_active_range(0, 0, 262124) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262124
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262124
>On node 0 totalpages: 262124
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32493 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ASUS P4B266 detected: force use of acpi=ht
>ACPI: RSDP 000F7720, 0014 (r0 ASUS  )
>ACPI: RSDT 3FFEC000, 0030 (r1 ASUS   P4B266   42302E31 MSFT 31313031)
>ACPI: FACP 3FFEC100, 0074 (r1 ASUS   P4B266   42302E31 MSFT 31313031)
>ACPI: DSDT 3FFEC180, 2591 (r1   ASUS P4B266       1000 MSFT  100000B)
>ACPI: FACS 3FFFF000, 0040
>ACPI: BOOT 3FFEC040, 0028 (r1 ASUS   P4B266   42302E31 MSFT 31313031)
>ACPI: APIC 3FFEC080, 005A (r1 ASUS   P4B266   42302E31 MSFT 31313031)
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 260077
>Kernel command line: ro root=LABEL=/ selinux=0 lapic vga=0x305 video=vesafb:ywrap,mtrr:3
>Found and enabled local APIC!
>mapped APIC to ffffb000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c072c000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2018.054 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032180k/1048496k available (1953k kernel code, 15588k reserved, 1037k data, 236k init, 130992k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff99000 - 0xfffff000   ( 408 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc06ed000 - 0xc0728000   ( 236 kB)
>      .data : 0xc05e85cf - 0xc06ebb84   (1037 kB)
>      .text : 0xc0400000 - 0xc05e85cf   (1953 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4037.87 BogoMIPS (lpj=2018937)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Compat vDSO mapped to ffffe000.
>CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>Checking 'hlt' instruction... OK.
>khelper used greatest stack depth: 3444 bytes left
>Time: 11:32:44  Date: 06/29/107
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf1090, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>khelper used greatest stack depth: 3260 bytes left
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Enabled i801 SMBus device
>PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
>PCI: setting IRQ 4 as level-triggered
>PCI: Found IRQ 4 for device 0000:02:0b.0
>PCI: Sharing IRQ 4 with 0000:00:1f.4
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: f3000000-f3dfffff
>  PREFETCH window: f3f00000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: f2000000-f2ffffff
>  PREFETCH window: f3e00000-f3efffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2965k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>audit: initializing netlink socket (disabled)
>audit(1185708764.490:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 3252 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf4000000, mapped to 0xf8880000, using 1536k, total 32768k
>vesafb: mode is 1024x768x8, linelength=1024, pages=41
>vesafb: protected mode interface info at c000:4645
>vesafb: pmi: set display start = c00c46b3, set palette = c00c46ed
>vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
>vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 845G Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Testing NMI watchdog ... OK.
>Using IPI Shortcut mode
>  Magic number: 15:827:530
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 847k
>USB Universal Host Controller Interface driver v3.0
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:00:1f.2
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000a400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Found IRQ 4 for device 0000:00:1f.4
>PCI: Sharing IRQ 4 with 0000:02:0b.0
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 4, io base 0x0000a000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>insmod used greatest stack depth: 2028 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001a800 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001a808 irq 15
>ata1.00: ATA-4: ST340824A, 3.05, max UDMA/100
>ata1.00: 78165360 sectors, multi 16: LBA 
>ata1.01: ATA-6: ST3120022A, 3.06, max UDMA/100
>ata1.01: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>ata2.00: ATA-6: ST380020A, 3.39, max UDMA/100
>ata2.00: 156301488 sectors, multi 16: LBA 
>ata2.01: ATAPI: SAMSUNG DVD-ROM SD-616E, F502, max UDMA/33
>ata2.00: configured for UDMA/100
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST340824A        3.05 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      ST3120022A       3.06 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST380020A        3.39 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdc] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sdc] Write Protect is off
>sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdc] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sdc] Write Protect is off
>sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 1:0:0:0: [sdc] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            SAMSUNG  DVD-ROM SD-616E  F502 PQ: 0 ANSI: 5
>insmod used greatest stack depth: 1316 bytes left
>XFS mounting filesystem sda3
>Ending clean XFS mount for filesystem: sda3
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: Attached scsi generic sg2 type 0
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>PCI: setting IRQ 5 as level-triggered
>PCI: Assigned IRQ 5 for device 0000:00:1f.3
>intel_rng: FWH not detected
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>PCI: Enabling device 0000:02:0a.0 (0014 -> 0017)
>PCI: setting IRQ 9 as level-triggered
>PCI: Assigned IRQ 9 for device 0000:02:0a.0
>eth0: RTL8110s at 0xf8afe000, 00:08:54:3d:e3:03, XID 04000000 IRQ 9
>8139too Fast Ethernet driver 0.9.28
>PCI: Enabling device 0000:02:0b.0 (0004 -> 0007)
>PCI: Found IRQ 4 for device 0000:02:0b.0
>PCI: Sharing IRQ 4 with 0000:00:1f.4
>eth1: RealTek RTL8139 at 0xf8b00000, 00:e0:7d:e1:1e:ee, IRQ 4
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>loop: module loaded
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>XFS mounting filesystem sda4
>Ending clean XFS mount for filesystem: sda4
>XFS mounting filesystem sdb1
>Ending clean XFS mount for filesystem: sdb1
>Adding 2097136k swap on /dev/sda2.  Priority:-1 extents:1 across:2097136k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Bridge firewalling registered
>r8169: eth0: status = 00000020
>r8169: eth0: link up
>r8169: eth0: link up
>r8169: eth0: link down
>Clocksource tsc unstable (delta = 56232429665 ns)
>Time: acpi_pm clocksource has been installed.
>device eth0 entered promiscuous mode
>audit(1185708841.308:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
>eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
>r8169: eth0: link up
>br0: port 1(eth0) entering learning state
>br0: topology change detected, propagating
>br0: port 1(eth0) entering forwarding state
>PPP generic driver version 2.4.2
>NET: Registered protocol family 24
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>device tap0 entered promiscuous mode
>audit(1185708854.211:3): dev=tap0 prom=256 old_prom=0 auid=4294967295
>br0: port 2(tap0) entering learning state
>br0: topology change detected, propagating
>br0: port 2(tap0) entering forwarding state

Actions: View

Attachments on bug 242572: 156603 | 156759 | 156815 | 156816 | 156817 | 158726 | 159748 | 160162 | 160173 | 160185 | 160277 | 160280 | 160474 | 160507 | 161084