Attachment 160330 Details for Bug 250266 – Boot log of Dell 1950 with megasas boot drive

Boot log of Dell 1950 with megasas boot drive

megasas-error.txt (text/plain), 22.93 KB, created by Clark Williams on 2007-07-31 15:06:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Clark Williams

Created: 2007-07-31 15:06:03 UTC

Size: 22.93 KB

patch

obsolete

>
>  Booting 'Red Hat Enterprise Linux (realtime) (2.6.21-31.el5rt)'
>
>root (hd0,2)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz-2.6.21-31.el5rt ro root=/dev/VolGroup00/LogVol00 crashkernel=12
>8M@16M console=tty0 console=ttyS0,115200n8
>   [Linux-bzImage, setup=0x1e00, size=0x21d838]
>initrd /initrd-2.6.21-31.el5rt.img
>   [Linux-initrd @ 0x37dae000, 0x2413ba bytes]
>
>Linux version 2.6.21-31.el5rt (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP PREEMPT RT Mon Jun 18 16:44:12 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 crashkernel=128M@16M console=tty0 console=ttyS0,115200n8
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000007ffa8000 (usable)
> BIOS-e820: 000000007ffa8000 - 000000007ffb7c00 (ACPI data)
> BIOS-e820: 000000007ffb7c00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F2A00, 0024 (r2 DELL  )
>ACPI: XSDT 000F2A80, 004C (r1 DELL   PE_SC3          1 DELL        1)
>ACPI: FACP 000F2B88, 00F4 (r3 DELL   PE_SC3          1 DELL        1)
>ACPI: DSDT 7FFA8000, 2A90 (r1 DELL   PE_SC3          1 MSFT  100000E)
>ACPI: FACS 7FFB7C00, 0040
>ACPI: APIC 000F2C7C, 00C8 (r1 DELL   PE_SC3          1 DELL        1)
>ACPI: SPCR 000F2D5D, 0050 (r1 DELL   PE_SC3          1 DELL        1)
>ACPI: HPET 000F2DAD, 0038 (r1 DELL   PE_SC3          1 DELL        1)
>ACPI: MCFG 000F2DE5, 003C (r1 DELL   PE_SC3          1 DELL        1)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffa8000
>Bootmem setup node 0 0000000000000000-000000007ffa8000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      160
>    0:      256 ->   524200
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
>IOAPIC[1]: apic_id 9, address 0xfec81000, GSI 64-87
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 8 CPUs, 4 hotplug CPUs
>PERCPU: Allocating 69248 bytes of per cpu data
>Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
>Built 1 zonelists.  Total pages: 509438
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 crashkernel=128M@16M console=tty0 console=ttyS0,115200n8
>Initializing CPU#0
>WARNING: experimental RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against HPET
>time.c: Detected 2327.498 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 1900244k/2096800k available (2601k kernel code, 196172k reserved, 2218k data, 360k init)
>Calibrating delay using timer specific routine.. 4657.54 BogoMIPS (lpj=2328770)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4733.15 BogoMIPS (lpj=2366578)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/6 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327507)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4655.04 BogoMIPS (lpj=2327522)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/7 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>migration_cost=22,9265
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
>ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:08: ioport range 0x800-0x87f has been reserved
>pnp: 00:08: ioport range 0x880-0x8bf has been reserved
>pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
>pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
>pnp: 00:08: ioport range 0xca9-0xcab has been reserved
>pnp: 00:08: ioport range 0xcad-0xcaf has been reserved
>pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
>pnp: 00:09: ioport range 0xcac-0xcac has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>PCI: Bridge: 0000:08:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.0
>  IO window: disabled.
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: f2000000-f7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: fc400000-fc5fffff
>  PREFETCH window: d8000000-d80fffff
>PCI: Bridge: 0000:01:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: fc300000-fc5fffff
>  PREFETCH window: d8000000-d80fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: f8000000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f8000000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fc100000-fc2fffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 32768 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2308k freed
>audit: initializing netlink socket (disabled)
>audit(1185874657.869:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>aer: probe of 0000:00:02.0:pcie01 failed with error 2
>aer: probe of 0000:00:03.0:pcie01 failed with error 2
>aer: probe of 0000:00:04.0:pcie01 failed with error 2
>aer: probe of 0000:00:05.0:pcie01 failed with error 1
>aer: probe of 0000:00:06.0:pcie01 failed with error 2
>aer: probe of 0000:00:07.0:pcie01 failed with error 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>hda: HL-DT-STCD-RW/DVD-ROM GCC-4244N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 360k freed
>Write protecting the kernel read-only data: 1642k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcdUSB Universal Host Controller Interface driver v3.0
>.ko module
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Loading ohci-hcd.ko module
>LoadACPI: PCI Interrupt 0000:00:1d.7[A] -> ing ehci-hcd.ko GSI 21 (level, low) -> IRQ 21
>module
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading megaraidmegasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
>_sas.ko module
>megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 78
>megasas: FW now in Ready state
>scsi0 : LSI Logic SAS based MegaRAID driver
>scsi 0:0:0:0: Direct-Access     FUJITSU  MAY2073RC        D108 PQ: 0 ANSI: 3
>scsi 0:0:1:0: Direct-Access     FUJITSU  MAY2073RC        D108 PQ: 0 ANSI: 3
>scsi 0:0:8:0: Enclosure         DP       BACKPLANE        1.00 PQ: 0 ANSI: 5
>scsi scan: INQUIRY result too short (5), using 36
>usb 4-5: new high speed USB device using ehci_hcd and address 2
>scsi 0:2:0:0: Direct-Access     DELL     PERC 5/i         1.00 PQ: 0 ANSI: 5
>SCSI device sda: 284164096 512-byte hdwr sectors (145492 MB)
>sda: test WP failed, assume Write Enabled
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 284164096 512-byte hdwr sectors (145492 MB)
>sda: test WP failed, assume Write Enabled
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:2:0:0: Attached scsi disk sda
>Loading dm-mod.ko module
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Waiting for driver initialization.
>usb 4-5: configuration #1 chosen from 1 choice
>hub 4-5:1.0: USB hub found
>hub 4-5:1.0: 4 ports detected
>usb 4-5.1: new low speed USB device using ehci_hcd and address 3
>usb 4-5.1: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input0
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.7-5.1
>usb 4-5.2: new low speed USB device using ehci_hcd and address 4
>usb 4-5.2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-5.2
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>Setting up otherEXT3-fs: mounted filesystem with ordered data mode.
> filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1185874664.368:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>audit(1185874664.868:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>                Welcome to Red Hat Enterprise Linux Server
>                Press 'I' to enter interactive startup.
>Setting clock  (localtime): Tue Jul 31 09:37:48 CDT 2007 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname localhost.localdomain:  [  OK  ]
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
>/dev/VolGroup00/LogVol00: clean, 312506/34471936 files, 9292036/34447360 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda3 
>/boot: clean, 69/26208 files, 85195/104420 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 5
>Entering non-interactive startup
>Applying Intel CPU microcode update: [  OK  ]
>Starting background readahead: [  OK  ]
>Checking for hardware changes [  OK  ]
>Applying ip6tables firewall rules: [  OK  ]
>Applying iptables firewall rules: [  OK  ]
>Loading additional iptables modules: ip_conntrack_netbios_ns [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>Starting restorecond: [  OK  ]
>Starting auditd: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting portmap: [  OK  ]
>Starting setroubleshootd: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Starting kdump:[  OK  ]
>Starting system message bus: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Mounting NFS filesystems:  [FAILED]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: Can't listen on HID control channel: Permission denied
>[FAILED]
>Setting NIS domain name redhat.com:  [  OK  ]
>Turning on allow_ypbind SELinux boolean
>Binding to the NIS domain: [  OK  ]
>Listening for an NIS domain server.
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting hpiod: [  OK  ]
>Starting hpssd: [  OK  ]
>Starting cups: [  OK  ]
>Starting sshd: [  OK  ]
>ntpd: Synchronizing with time server: [FAILED]
>Starting ntpd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting background readahead: [  OK  ]
>Starting Red Hat Network Daemon: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>sd 0:2:0:0: megasas: RESET -7607 cmd=28
>megasas: [ 0]waiting for 1 commands to complete
>megasas: [ 5]waiting for 1 commands to complete
>megasas: [10]waiting for 1 commands to complete
>megasas: [15]waiting for 1 commands to complete
>megasas: [20]waiting for 1 commands to complete
>megasas: [25]waiting for 1 commands to complete
>megasas: [30]waiting for 1 commands to complete
>megasas: [35]waiting for 1 commands to complete
>megasas: [40]waiting for 1 commands to complete
>megasas: [45]waiting for 1 commands to complete
>megasas: [50]waiting for 1 commands to complete
>megasas: [55]waiting for 1 commands to complete
>megasas: [60]waiting for 1 commands to complete
>megasas: [65]waiting for 1 commands to complete
>megasas: [70]waiting for 1 commands to complete
>megasas: [75]waiting for 1 commands to complete
>megasas: [80]waiting for 1 commands to complete
>megasas: [85]waiting for 1 commands to complete
>megasas: [90]waiting for 1 commands to complete
>megasas: [95]waiting for 1 commands to complete
>megasas: [100]waiting for 1 commands to complete
>megasas: [105]waiting for 1 commands to complete
>megasas: [110]waiting for 1 commands to complete
>megasas: [115]waiting for 1 commands to complete
>megasas: [120]waiting for 1 commands to complete
>megasas: [125]waiting for 1 commands to complete
>megasas: [130]waiting for 1 commands to complete
>megasas: [135]waiting for 1 commands to complete
>megasas: [140]waiting for 1 commands to complete
>megasas: [145]waiting for 1 commands to complete
>megasas: [150]waiting for 1 commands to complete
>megasas: [155]waiting for 1 commands to complete
>megasas: [160]waiting for 1 commands to complete
>
>

Actions: View

Attachments on bug 250266: 160330 | 161776 | 204301 | 230321