Attachment 160351 Details for Bug 242254 – bootlog of 2.6.22.1-33.local.fc7

bootlog of 2.6.22.1-33.local.fc7

boot.txt (text/plain), 45.18 KB, created by George Shearer on 2007-07-31 19:29:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: George Shearer

Created: 2007-07-31 19:29:10 UTC

Size: 45.18 KB

patch

obsolete

>Linux version 2.6.22.1-33.local.fc7 (root@dfs.dh.lame.org) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jul 31 14:51:18 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Warning only 4GB will be used.
>Use a PAE enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5360
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F6CF0, 0014 (r0 GBT   )
>ACPI: RSDT CFEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP CFEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT CFEE3180, 49F4 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
>ACPI: FACS CFEE0000, 0040
>ACPI: HPET CFEE7CC0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG CFEE7D40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC CFEE7BC0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: SSDT CFEE7DC0, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
>ACPI: SSDT CFEE8250, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
>Built 1 zonelists.  Total pages: 1040384
>Kernel command line: ro root=LABEL=/1
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0790000 soft=c0770000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3200.151 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3364672k/4194304k available (2105k kernel code, 40912k reserved, 1111k data, 260k init, 2489216k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072a000 - 0xc076b000   ( 260 kB)
>      .data : 0xc060e6e6 - 0xc0724524   (1111 kB)
>      .text : 0xc0400000 - 0xc060e6e6   (2105 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 6403.24 BogoMIPS (lpj=3201622)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0791000 soft=c0771000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6399.97 BogoMIPS (lpj=3199989)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>Total of 2 processors activated (12803.22 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 19:23:19  Date: 06/31/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
>pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved
>pnp: 00:0b: iomem range 0xd3000-0xd3fff has been reserved
>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f2000000-f4ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 6000-6fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: f5000000-f50fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f5000000-f50fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 7000-8fff
>  MEM window: f5100000-f51fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 9000-9fff
>  MEM window: f0000000-f1ffffff
>  PREFETCH window: f5300000-f53fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: e4000000-efffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2876k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1185909797.174:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key E3C90E1913559C8B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: SSDT CFEE81C0, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
>ACPI: Processor [CPU1] (supports 2 throttling states)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:175:396
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 858k
>input: AT Translated Set 2 keyboard as /class/input/input1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000a400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ac00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf5205000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf5204000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b802 bmdma 0x0001c400 irq 18
>ata2: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001c002 bmdma 0x0001c408 irq 18
>ata1.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata1.00: ATA-7: Maxtor 6L200M0, BACE1G10, max UDMA/133
>ata1.00: 398294975 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata1.00: configured for UDMA/133
>ata2.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata2.00: ATA-7: Maxtor 6L200M0, BANC1E00, max UDMA/133
>ata2.00: 398294975 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BACE PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 398294975 512-byte hardware sectors (203927 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 398294975 512-byte hardware sectors (203927 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 398294975 512-byte hardware sectors (203927 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 398294975 512-byte hardware sectors (203927 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001d402 bmdma 0x0001e000 irq 18
>ata4: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001dc02 bmdma 0x0001e008 irq 18
>ata3.00: ATA-7: Maxtor 6L200M0, BANC1E00, max UDMA/133
>ata3.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>ata4.00: ATA-7: Maxtor 6L200M0, BANC1G10, max UDMA/133
>ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors (203928 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-2: new full speed USB device using uhci_hcd and address 4
>usb 5-2: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>scsi4 : pata_jmicron
>scsi5 : pata_jmicron
>ata5: PATA max UDMA/100 cmd 0x00017000 ctl 0x00017402 bmdma 0x00018000 irq 16
>ata6: PATA max UDMA/100 cmd 0x00017800 ctl 0x00017c02 bmdma 0x00018008 irq 16
>ata5.00: ATAPI: ASUS    CD-S520/A4, 1.21, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            ASUS     CD-S520/A4       1.21 PQ: 0 ANSI: 5
>ahci 0000:05:00.0: version 2.2
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18
>ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 cmd 0xf883c100 ctl 0x00000000 bmdma 0x00000000 irq 18
>ata8: SATA max UDMA/133 cmd 0xf883c180 ctl 0x00000000 bmdma 0x00000000 irq 18
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata7.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata7.00: ATA-7: Maxtor 6L200M0, BANC1E00, max UDMA/133
>ata7.00: 398294975 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata7.00: Host Protected Area detected:
>        current size: 398294975 sectors
>        native size: 398297088 sectors
>ata7.00: configured for UDMA/133
>ata8: SATA link down (SStatus 0 SControl 300)
>scsi 6:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>sd 6:0:0:0: [sde] 398294975 512-byte hardware sectors (203927 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sde] 398294975 512-byte hardware sectors (203927 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1
>sd 6:0:0:0: [sde] Attached SCSI disk
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1185909824.670:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>scsi 4:0:0:0: Attached scsi generic sg4 type 5
>sd 6:0:0:0: Attached scsi generic sg5 type 0
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>iTCO_vendor_support: vendor-support=0
>Floppy drive(s): fd0 is 1.44M
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>sky2 0000:06:00.0: v1.14 addr 0xf1000000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:16:e6:5a:1a:28
>FDC 0 is a post-1991 82077
>Linux video capture interface: v2.00
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 21
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 5-1:1.0: pl2303 converter detected
>usb 5-1: pl2303 converter now attached to ttyUSB0
>pl2303 5-2:1.0: pl2303 converter detected
>usb 5-2: pl2303 converter now attached to ttyUSB1
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>ivtv:  ==================== START INIT IVTV ====================
>ivtv:  version 1.0.0 (2.6.22.1-33.local.fc7 SMP mod_unload 686 4KSTACKS ) loading
>firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI version 1.10
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 22
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>firewire_core: BM lock failed, making local node (ffc0) root.
>firewire_core: phy config: card 0, new root=ffc0, gap_count=16
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: created new fw device fw2 (0 config rom retries, S400)
>firewire_core: created new fw device fw3 (0 config rom retries, S400)
>firewire_core: created new fw device fw4 (0 config rom retries, S400)
>firewire_core: created new fw device fw5 (0 config rom retries, S400)
>firewire_core: created new fw device fw6 (0 config rom retries, S400)
>ivtv0: loaded v4l-cx2341x-enc.fw firmware (4148584696 bytes)
>ivtv0: Encoder revision: 0x02060039
>tveeprom 1-0050: Hauppauge model 32032, rev B326, serial# 7109409
>tveeprom 1-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: audio processor is MSP4448 (idx 27)
>tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
>tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
>ivtv0: Autodetected Hauppauge WinTV PVR-250
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
>msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
>msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
>tuner 1-0061: type set to 8 (Temic NTSC (4036 FY5))
>ivtv0: Registered device video0 for encoder MPEG (4 MB)
>ivtv0: Registered device video32 for encoder YUV (2 MB)
>ivtv0: Registered device vbi0 for encoder VBI (1 MB)
>ivtv0: Registered device video24 for encoder PCM audio (1 MB)
>ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
>ivtv:  ======================  NEXT CARD  ======================
>ivtv1: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 19 (level, low) -> IRQ 18
>ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
>scsi8 : SBP-2 IEEE-1394
>firewire_sbp2: logged in to sbp2 unit fw1.0 LUN 0000 (0 retries)
>scsi 8:0:0:0: Direct-Access-RBC ST350063 0A               3.AA PQ: 0 ANSI: 4
>sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
>sd 8:0:0:0: [sdf] Write Protect is off
>sd 8:0:0:0: [sdf] Mode Sense: 11 00 00 00
>sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
>sd 8:0:0:0: [sdf] Write Protect is off
>sd 8:0:0:0: [sdf] Mode Sense: 11 00 00 00
>sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: sdf1
>sd 8:0:0:0: [sdf] Attached SCSI disk
>sd 8:0:0:0: Attached scsi generic sg6 type 14
>firewire_sbp2: logged in to sbp2 unit fw2.0 LUN 0000 (0 retries)
>scsi 8:0:1:0: Direct-Access-RBC Maxtor 6 Y250P0           YAR4 PQ: 0 ANSI: 4
>sd 8:0:1:0: [sdg] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:1:0: [sdg] Write Protect is off
>sd 8:0:1:0: [sdg] Mode Sense: 11 00 00 00
>sd 8:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:1:0: [sdg] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:1:0: [sdg] Write Protect is off
>sd 8:0:1:0: [sdg] Mode Sense: 11 00 00 00
>sd 8:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdg: sdg1
>sd 8:0:1:0: [sdg] Attached SCSI disk
>sd 8:0:1:0: Attached scsi generic sg7 type 14
>firewire_sbp2: logged in to sbp2 unit fw2.0 LUN 0001 (0 retries)
>scsi 8:0:1:1: Direct-Access-RBC SAMSUNG  SP2514N          VF10 PQ: 0 ANSI: 4
>sd 8:0:1:1: [sdh] 66055248 512-byte hardware sectors (33820 MB)
>sd 8:0:1:1: [sdh] Write Protect is off
>sd 8:0:1:1: [sdh] Mode Sense: 11 00 00 00
>sd 8:0:1:1: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:1:1: [sdh] 66055248 512-byte hardware sectors (33820 MB)
>sd 8:0:1:1: [sdh] Write Protect is off
>sd 8:0:1:1: [sdh] Mode Sense: 11 00 00 00
>sd 8:0:1:1: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdh: sdh1
> sdh: p1 exceeds device capacity
>sd 8:0:1:1: [sdh] Attached SCSI disk
>sd 8:0:1:1: Attached scsi generic sg8 type 14
>firewire_sbp2: logged in to sbp2 unit fw3.0 LUN 0000 (0 retries)
>scsi 8:0:2:0: Direct-Access-RBC Maxtor 6 B250R0           BAH4 PQ: 0 ANSI: 4
>sd 8:0:2:0: [sdi] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:2:0: [sdi] Write Protect is off
>sd 8:0:2:0: [sdi] Mode Sense: 11 00 00 00
>sd 8:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:2:0: [sdi] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:2:0: [sdi] Write Protect is off
>sd 8:0:2:0: [sdi] Mode Sense: 11 00 00 00
>sd 8:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdi: sdi1
>sd 8:0:2:0: [sdi] Attached SCSI disk
>sd 8:0:2:0: Attached scsi generic sg9 type 14
>firewire_sbp2: logged in to sbp2 unit fw3.0 LUN 0001 (0 retries)
>scsi 8:0:2:1: Direct-Access-RBC SAMSUNG  SP2514N          VF10 PQ: 0 ANSI: 4
>sd 8:0:2:1: [sdj] 66055248 512-byte hardware sectors (33820 MB)
>sd 8:0:2:1: [sdj] Write Protect is off
>sd 8:0:2:1: [sdj] Mode Sense: 11 00 00 00
>sd 8:0:2:1: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:2:1: [sdj] 66055248 512-byte hardware sectors (33820 MB)
>sd 8:0:2:1: [sdj] Write Protect is off
>sd 8:0:2:1: [sdj] Mode Sense: 11 00 00 00
>sd 8:0:2:1: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdj: sdj1
> sdj: p1 exceeds device capacity
>sd 8:0:2:1: [sdj] Attached SCSI disk
>sd 8:0:2:1: Attached scsi generic sg10 type 14
>firewire_sbp2: logged in to sbp2 unit fw4.0 LUN 0000 (0 retries)
>scsi 8:0:3:0: Direct-Access-RBC Maxtor 6 B250R0           BAH4 PQ: 0 ANSI: 4
>sd 8:0:3:0: [sdk] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:3:0: [sdk] Write Protect is off
>sd 8:0:3:0: [sdk] Mode Sense: 11 00 00 00
>sd 8:0:3:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:3:0: [sdk] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:3:0: [sdk] Write Protect is off
>sd 8:0:3:0: [sdk] Mode Sense: 11 00 00 00
>sd 8:0:3:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdk: sdk1
>sd 8:0:3:0: [sdk] Attached SCSI disk
>sd 8:0:3:0: Attached scsi generic sg11 type 14
>firewire_sbp2: logged in to sbp2 unit fw4.0 LUN 0001 (0 retries)
>scsi 8:0:3:1: Direct-Access-RBC Maxtor 6 Y250P0           YAR4 PQ: 0 ANSI: 4
>sd 8:0:3:1: [sdl] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:3:1: [sdl] Write Protect is off
>sd 8:0:3:1: [sdl] Mode Sense: 11 00 00 00
>sd 8:0:3:1: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:3:1: [sdl] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:3:1: [sdl] Write Protect is off
>sd 8:0:3:1: [sdl] Mode Sense: 11 00 00 00
>sd 8:0:3:1: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdl: sdl1
>sd 8:0:3:1: [sdl] Attached SCSI disk
>sd 8:0:3:1: Attached scsi generic sg12 type 14
>firewire_sbp2: logged in to sbp2 unit fw5.0 LUN 0000 (0 retries)
>scsi 8:0:4:0: Direct-Access-RBC Maxtor 6 Y250P0           YAR4 PQ: 0 ANSI: 4
>sd 8:0:4:0: [sdm] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:4:0: [sdm] Write Protect is off
>sd 8:0:4:0: [sdm] Mode Sense: 11 00 00 00
>attempt to access beyond end of device
>sdh: rw=0, want=488391873, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195904
>attempt to access beyond end of device
>sdh: rw=0, want=488391875, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195905
>attempt to access beyond end of device
>sdh: rw=0, want=488391877, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195906
>attempt to access beyond end of device
>sdh: rw=0, want=488391879, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195907
>attempt to access beyond end of device
>sdh: rw=0, want=488391873, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195904
>attempt to access beyond end of device
>sdh: rw=0, want=488391875, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195905
>attempt to access beyond end of device
>sdh: rw=0, want=488391877, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195906
>attempt to access beyond end of device
>sdh: rw=0, want=488391879, limit=66055248
>Buffer I/O error on device sdh1, logical block 244195907
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>Buffer I/O error on device sdh1, logical block 244196000
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>Buffer I/O error on device sdh1, logical block 244196000
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392001, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392003, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392005, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392007, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392049, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392051, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392053, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392055, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdh: rw=0, want=488392065, limit=66055248
>sd 8:0:4:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:4:0: [sdm] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:4:0: [sdm] Write Protect is off
>sd 8:0:4:0: [sdm] Mode Sense: 11 00 00 00
>sd 8:0:4:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdm: sdm1
>sd 8:0:4:0: [sdm] Attached SCSI disk
>sd 8:0:4:0: Attached scsi generic sg13 type 14
>firewire_sbp2: logged in to sbp2 unit fw5.0 LUN 0001 (0 retries)
>scsi 8:0:4:1: Direct-Access-RBC WDC WD25 00JB-00GVA0      08.0 PQ: 0 ANSI: 4
>sd 8:0:4:1: [sdn] 488397168 512-byte hardware sectors (250059 MB)
>sd 8:0:4:1: [sdn] Write Protect is off
>sd 8:0:4:1: [sdn] Mode Sense: 11 00 00 00
>attempt to access beyond end of device
>sdj: rw=0, want=488391873, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391875, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391877, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391879, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391873, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391875, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391877, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391879, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392001, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392003, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392005, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392007, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392049, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392051, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392053, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392055, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488392065, limit=66055248
>sd 8:0:4:1: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:4:1: [sdn] 488397168 512-byte hardware sectors (250059 MB)
>sd 8:0:4:1: [sdn] Write Protect is off
>sd 8:0:4:1: [sdn] Mode Sense: 11 00 00 00
>sd 8:0:4:1: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdn: sdn1
>sd 8:0:4:1: [sdn] Attached SCSI disk
>sd 8:0:4:1: Attached scsi generic sg14 type 14
>firewire_sbp2: logged in to sbp2 unit fw6.0 LUN 0000 (0 retries)
>scsi 8:0:5:0: Direct-Access-RBC Maxtor 6 B250R0           BAH4 PQ: 0 ANSI: 4
>sd 8:0:5:0: [sdo] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:5:0: [sdo] Write Protect is off
>sd 8:0:5:0: [sdo] Mode Sense: 11 00 00 00
>sd 8:0:5:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:5:0: [sdo] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:5:0: [sdo] Write Protect is off
>sd 8:0:5:0: [sdo] Mode Sense: 11 00 00 00
>sd 8:0:5:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdo: sdo1
>sd 8:0:5:0: [sdo] Attached SCSI disk
>sd 8:0:5:0: Attached scsi generic sg15 type 14
>firewire_sbp2: logged in to sbp2 unit fw6.0 LUN 0001 (0 retries)
>scsi 8:0:5:1: Direct-Access-RBC Maxtor 6 Y250P0           YAR4 PQ: 0 ANSI: 4
>sd 8:0:5:1: [sdp] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:5:1: [sdp] Write Protect is off
>sd 8:0:5:1: [sdp] Mode Sense: 11 00 00 00
>ivtv1: loaded v4l-cx2341x-enc.fw firmware (4148585168 bytes)
>sd 8:0:5:1: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:5:1: [sdp] 490234752 512-byte hardware sectors (251000 MB)
>sd 8:0:5:1: [sdp] Write Protect is off
>sd 8:0:5:1: [sdp] Mode Sense: 11 00 00 00
>sd 8:0:5:1: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdp: sdp1
>sd 8:0:5:1: [sdp] Attached SCSI disk
>sd 8:0:5:1: Attached scsi generic sg16 type 14
>ivtv1: Encoder revision: 0x02060039
>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #1)
>msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1)
>msp3400 2-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
>tveeprom 2-0050: Hauppauge model 32032, rev B326, serial# 7109749
>tveeprom 2-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 2-0050: audio processor is MSP4448 (idx 27)
>tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
>tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
>ivtv1: Autodetected Hauppauge WinTV PVR-250
>tuner 2-0061: type set to 8 (Temic NTSC (4036 FY5))
>ivtv1: Registered device video1 for encoder MPEG (4 MB)
>ivtv1: Registered device video33 for encoder YUV (2 MB)
>ivtv1: Registered device vbi1 for encoder VBI (1 MB)
>ivtv1: Registered device video25 for encoder PCM audio (1 MB)
>ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
>ivtv:  ======================  NEXT CARD  ======================
>ivtv2: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 18 (level, low) -> IRQ 21
>ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
>ivtv2: loaded v4l-cx2341x-enc.fw firmware (4148585472 bytes)
>ivtv2: Encoder revision: 0x02060039
>tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2)
>saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #2)
>msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #2)
>msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
>tveeprom 3-0050: Hauppauge model 32032, rev B326, serial# 7109738
>tveeprom 3-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
>tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 3-0050: audio processor is MSP4448 (idx 27)
>tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
>tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter
>ivtv2: Autodetected Hauppauge WinTV PVR-250
>tuner 3-0061: type set to 8 (Temic NTSC (4036 FY5))
>ivtv2: Registered device video2 for encoder MPEG (4 MB)
>ivtv2: Registered device video34 for encoder YUV (2 MB)
>ivtv2: Registered device vbi2 for encoder VBI (1 MB)
>ivtv2: Registered device video26 for encoder PCM audio (1 MB)
>ivtv2: Initialized Hauppauge WinTV PVR-250, card #2
>ivtv:  ====================  END INIT IVTV  ====================
>loop: module loaded
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input3
>ACPI: Power Button (CM) [PWRB]
>md: md0 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>md: raid1 personality registered for level 1
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: md1 stopped.
>md: bind<sdd1>
>md: bind<sdc1>
>md: raid0 personality registered for level 0
>md1: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at sdc1
>raid0:   comparing sdc1(199141632) with sdc1(199141632)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdd1
>raid0:   comparing sdd1(199141632) with sdc1(199141632)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 398283264 blocks.
>raid0 : conf->hash_spacing is 398283264 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 4 bytes for hash.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>attempt to access beyond end of device
>sdh: rw=0, want=488391873, limit=66055248
>attempt to access beyond end of device
>sdj: rw=0, want=488391873, limit=66055248
>EXT3 FS on sda1, internal journal
>Adding 10241396k swap on /dev/sdb1.  Priority:-1 extents:1 across:10241396k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 48K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 242254: 160351