Attachment 160602 Details for Bug 250742 – Ouput of dmesg

Ouput of dmesg

dmesg.log (text/plain), 24.21 KB, created by Kaare Fiedler Christiansen on 2007-08-03 12:52:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kaare Fiedler Christiansen

Created: 2007-08-03 12:52:33 UTC

Size: 24.21 KB

patch

obsolete

>Linux version 2.6.22.1-41.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 18:10:34 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003feaa000 (usable)
> BIOS-e820: 000000003feaa000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261802) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261802
>early_node_map[1] active PFN ranges
>    0:        0 ->   261802
>On node 0 totalpages: 261802
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 253 pages used for memmap
>  HighMem zone: 32173 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDF00, 0014 (r0 DELL  )
>ACPI: RSDT 3FEF0000, 0028 (r1 DELL    CPi R   27D4061C ASL        61)
>ACPI: FACP 3FEF0400, 0074 (r1 DELL    CPi R   27D4061C ASL        61)
>ACPI: DSDT 3FEF0C00, 32AD (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 3FEFF800, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000)
>Built 1 zonelists.  Total pages: 259757
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0180f000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0790000 soft=c0770000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1698.640 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029608k/1047208k available (2105k kernel code, 16872k reserved, 1111k data, 260k init, 129704k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072a000 - 0xc076b000   ( 260 kB)
>      .data : 0xc060e78e - 0xc0724504   (1111 kB)
>      .text : 0xc0400000 - 0xc060e78e   (2105 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3398.22 BogoMIPS (lpj=1699110)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 11:04:46  Date: 07/03/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 has been reserved
>pnp: 00:02: ioport range 0x808-0x80f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x810-0x85f has been reserved
>pnp: 00:03: ioport range 0x860-0x87f has been reserved
>pnp: 00:03: ioport range 0x880-0x8bf has been reserved
>pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:08: ioport range 0x900-0x97f has been reserved
>pnp: 00:0d: ioport range 0x7b0-0x7bb has been reserved
>pnp: 00:0d: ioport range 0x7c0-0x7df has been reserved
>pnp: 00:0d: ioport range 0xbb0-0xbbb has been reserved
>pnp: 00:0d: ioport range 0xbc0-0xbdf has been reserved
>pnp: 00:0d: ioport range 0xfb0-0xfbb has been reserved
>pnp: 00:0d: ioport range 0xfc0-0xfdf has been reserved
>pnp: 00:0d: ioport range 0x13b0-0x13bb has been reserved
>pnp: 00:0d: ioport range 0x13c0-0x13df has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bus 2, cardbus bridge: 0000:01:01.0
>  IO window: 0000e000-0000e0ff
>  IO window: 0000e400-0000e4ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 58000000-5bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:01:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3494k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1186139086.542:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 511F5DD0680EFF29
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (36 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: Detected 892K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:01:01.0 [1028:0163]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:01:01.0, mfunc 0x012c1222, devctl 0x64
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000086
>Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
>cs: IO port probe 0xe000-0xefff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:913:73
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 858k
>Clocksource tsc unstable (delta = -464288985 ns)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfaeffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>ata1.00: ATA-6: HTS548060M9AT00, MGBOA53A, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTS548060M9AT00  MGBO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 4-6: new high speed USB device using ehci_hcd and address 3
>usb 4-6: configuration #1 chosen from 1 choice
>hub 4-6:1.0: USB hub found
>hub 4-6:1.0: 4 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>usb 4-6.2: new low speed USB device using ehci_hcd and address 4
>usb 4-6.2: configuration #1 chosen from 1 choice
>input: Logitech USB Trackball as /class/input/input4
>input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.7-6.2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1186139092.009:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>iTCO_vendor_support: vendor-support=0
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>intel_rng: FWH not detected
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xfcffe000, irq 11, MAC addr 00:0F:1F:B9:97:09
>ACPI: PCI Interrupt 0000:01:01.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>firewire_ohci: Added fw-ohci device 0000:01:01.1, OHCI version 1.10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
>ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
>ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
>ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI core, index 4
>ssb: Sonics Silicon Backplane found on PCI device 0000:01:03.0
>bcm43xx-phy0: Broadcom 4306 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>bcm43xx-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>bcm43xx-phy0 debug: Radio turned off
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>wmaster0: Selected rate control algorithm 'simple'
>firewire_core: created new fw device fw0 (0 config rom retries)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50121 usecs
>intel8x0: clocking to 48000
>loop: module loaded
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: ACPI Dock Station Driver 
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>audit(1186139130.492:3): audit_pid=1491 old=0 by auid=4294967295
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>bcm43xx-phy0 debug: Adding Interface type 2
>ssb: Switching to PCI core, index 4
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx-phy0 debug: Radio turned on
>bcm43xx-phy0 debug: Radio enabled by hardware
>bcm43xx-phy0 debug: bbatt(11) >= size of LO array
> [<f8a6bebe>] bcm43xx_get_lo_g_ctl+0x63/0xa1 [bcm43xx_mac80211]
> [<f8a6bf2e>] bcm43xx_lo_g_ctl_current+0x32/0x35 [bcm43xx_mac80211]
> [<f8a6c014>] bcm43xx_lo_g_adjust+0x8/0x12 [bcm43xx_mac80211]
> [<f8a66a5b>] bcm43xx_phy_init_pctl+0x2ed/0x603 [bcm43xx_mac80211]
> [<f8a6153b>] bcm43xx_phy_write+0x5f/0x67 [bcm43xx_mac80211]
> [<f8a69adb>] bcm43xx_phy_initg+0xbdd/0xc3f [bcm43xx_mac80211]
> [<c042eb6a>] msleep+0xd/0x12
> [<f8a6a268>] bcm43xx_phy_init+0x518/0x53c [bcm43xx_mac80211]
> [<f8a5e9e4>] bcm43xx_chip_init+0x64f/0x92e [bcm43xx_mac80211]
> [<f8a5eedd>] bcm43xx_wireless_core_init+0x21a/0x6a0 [bcm43xx_mac80211]
> [<f8a5feb9>] bcm43xx_add_interface+0x5a/0xe5 [bcm43xx_mac80211]
> [<f8a110e2>] ieee80211_open+0x1fe/0x306 [mac80211]
> [<c05bedec>] __nla_put+0xe/0x25
> [<c05ab5e5>] dev_open+0x2e/0x68
> [<c05aa0b7>] dev_change_flags+0x4c/0xfa
> [<c05b1f6c>] rtnl_setlink+0x28a/0x395
> [<c04755ce>] __slab_alloc+0x43a/0x486
> [<c05b1ce2>] rtnl_setlink+0x0/0x395
> [<c05b1655>] rtnetlink_rcv_msg+0x1a1/0x1bb
> [<c05bdb12>] netlink_run_queue+0x5c/0xd2
> [<c05b14b4>] rtnetlink_rcv_msg+0x0/0x1bb
> [<c05b1473>] rtnetlink_rcv+0x25/0x3d
> [<c05bdf85>] netlink_data_ready+0x12/0x4c
> [<c05bcf51>] netlink_sendskb+0x19/0x30
> [<c05bdf67>] netlink_sendmsg+0x274/0x280
> [<c05a0eed>] sock_sendmsg+0xd0/0xeb
> [<c0436fad>] autoremove_wake_function+0x0/0x35
> [<c0436fad>] autoremove_wake_function+0x0/0x35
> [<c05a585e>] skb_dequeue+0x39/0x3f
> [<c0601f79>] unix_stream_recvmsg+0x3a2/0x4c3
> [<c04ec2f8>] copy_from_user+0x32/0x5e
> [<c05a109a>] sys_sendmsg+0x192/0x1f7
> [<c05a1b9f>] sys_recvmsg+0x148/0x1d0
> [<c05bd1a5>] netlink_insert+0x106/0x110
> [<c0461c6e>] activate_page+0x61/0x7e
> [<c0461df4>] mark_page_accessed+0x1c/0x30
> [<c045de0c>] filemap_nopage+0x184/0x2a9
> [<c05a1ec5>] sys_getsockname+0x86/0xb0
> [<c0467527>] __handle_mm_fault+0x350/0x8b8
> [<c0487e96>] d_alloc+0x141/0x16f
> [<c05a2300>] sys_socketcall+0x240/0x261
> [<c0404f8e>] syscall_call+0x7/0xb
> [<c0600000>] xfrm_add_sa+0x3e7/0x491
> =======================
>bcm43xx-phy0 debug: Chip initialized
>bcm43xx-phy0 debug: 30-bit DMA initialized
>irq 5: nobody cared (try booting with the "irqpoll" option)
> [<c0454942>] __report_bad_irq+0x36/0x75
> [<c0454b2f>] note_interrupt+0x1ae/0x1eb
> [<c045408a>] handle_IRQ_event+0x1a/0x3f
> [<c045545e>] handle_level_irq+0x95/0xc7
> [<c0407203>] do_IRQ+0xb8/0xd1
> [<c040592b>] common_interrupt+0x23/0x28
> [<c0454081>] handle_IRQ_event+0x11/0x3f
> [<c045544a>] handle_level_irq+0x81/0xc7
> [<c0407203>] do_IRQ+0xb8/0xd1
> [<c040592b>] common_interrupt+0x23/0x28
> [<c0454081>] handle_IRQ_event+0x11/0x3f
> [<c045544a>] handle_level_irq+0x81/0xc7
> [<c04553c9>] handle_level_irq+0x0/0xc7
> [<c04071f7>] do_IRQ+0xac/0xd1
> [<c056bdc7>] usb_hcd_poll_rh_status+0x12b/0x133
> [<c040592b>] common_interrupt+0x23/0x28
> [<c042be44>] __do_softirq+0x54/0xc1
> [<c04070f3>] do_softirq+0x59/0xb1
> [<c04553c9>] handle_level_irq+0x0/0xc7
> [<c042bd0c>] irq_exit+0x38/0x6b
> [<c0407208>] do_IRQ+0xbd/0xd1
> [<c040592b>] common_interrupt+0x23/0x28
> [<c04500d8>] audit_free_parent+0x47/0x4c
> [<f89ea1a1>] ssb_pci_read32+0x23/0x28 [ssb]
> [<f8a5ce6f>] bcm43xx_mac_enable+0x59/0xab [bcm43xx_mac80211]
> [<f8a609c8>] bcm43xx_interrupt_handler+0x0/0x243 [bcm43xx_mac80211]
> [<c04547fa>] request_irq+0x7c/0x98
> [<f8a5d520>] bcm43xx_wireless_core_start+0xde/0x156 [bcm43xx_mac80211]
> [<f8a5fed4>] bcm43xx_add_interface+0x75/0xe5 [bcm43xx_mac80211]
> [<f8a110e2>] ieee80211_open+0x1fe/0x306 [mac80211]
> [<c05bedec>] __nla_put+0xe/0x25
> [<c05ab5e5>] dev_open+0x2e/0x68
> [<c05aa0b7>] dev_change_flags+0x4c/0xfa
> [<c05b1f6c>] rtnl_setlink+0x28a/0x395
> [<c04755ce>] __slab_alloc+0x43a/0x486
> [<c05b1ce2>] rtnl_setlink+0x0/0x395
> [<c05b1655>] rtnetlink_rcv_msg+0x1a1/0x1bb
> [<c05bdb12>] netlink_run_queue+0x5c/0xd2
> [<c05b14b4>] rtnetlink_rcv_msg+0x0/0x1bb
> [<c05b1473>] rtnetlink_rcv+0x25/0x3d
> [<c05bdf85>] netlink_data_ready+0x12/0x4c
> [<c05bcf51>] netlink_sendskb+0x19/0x30
> [<c05bdf67>] netlink_sendmsg+0x274/0x280
> [<c05a0eed>] sock_sendmsg+0xd0/0xeb
> [<c0436fad>] autoremove_wake_function+0x0/0x35
> [<c0436fad>] autoremove_wake_function+0x0/0x35
> [<c05a585e>] skb_dequeue+0x39/0x3f
> [<c0601f79>] unix_stream_recvmsg+0x3a2/0x4c3
> [<c04ec2f8>] copy_from_user+0x32/0x5e
> [<c05a109a>] sys_sendmsg+0x192/0x1f7
> [<c05a1b9f>] sys_recvmsg+0x148/0x1d0
> [<c05bd1a5>] netlink_insert+0x106/0x110
> [<c0461c6e>] activate_page+0x61/0x7e
> [<c0461df4>] mark_page_accessed+0x1c/0x30
> [<c045de0c>] filemap_nopage+0x184/0x2a9
> [<c05a1ec5>] sys_getsockname+0x86/0xb0
> [<c0467527>] __handle_mm_fault+0x350/0x8b8
> [<c0487e96>] d_alloc+0x141/0x16f
> [<c05a2300>] sys_socketcall+0x240/0x261
> [<c0404f8e>] syscall_call+0x7/0xb
> [<c0600000>] xfrm_add_sa+0x3e7/0x491
> =======================
>handlers:
>[<f8b10014>] (snd_intel8x0_interrupt+0x0/0x1e2 [snd_intel8x0])
>[<f8a609c8>] (bcm43xx_interrupt_handler+0x0/0x243 [bcm43xx_mac80211])
>Disabling IRQ #5
>bcm43xx-phy0 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 250742: 160602 | 160607