Attachment 160647 Details for Bug 250816 – test file

test file

Maui_CD.txt (text/plain), 252.11 KB, created by IBM Mirproxy on 2007-08-03 19:15:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Mirproxy

Created: 2007-08-03 19:15:36 UTC

Size: 252.11 KB

patch

obsolete

>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>usb 1-1.1: new full speed USB device using address 9
>
>probe_bus_pseries: processing c000000079ff9d00
>scsi4 : SCSI emulation for USB Mass Storage devices
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
> Device Driver
>scan-log-dump nosr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>t implemented onUSB Mass Storage device found at 9
> this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installingusb 1-1.1: reset full speed USB device using address 9
> public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=64usb 1-1.1: reset full speed USB device using address 9
>0
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports,usb 1-1.1: reset full speed USB device using address 9
> IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy drivusb 1-1.1: reset full speed USB device using address 9
>er 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table enusb 1-1.1: reset full speed USB device using address 9
>tries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protousb 1-1.1: reset full speed USB device using address 9
>col family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization ssr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>equence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Modeusb 1-1.1: reset full speed USB device using address 9
>l: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scusb 1-1.1: reset full speed USB device using address 9
>si disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval usb 1-1.1: reset full speed USB device using address 9
>5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04usb 1-1.1: reset full speed USB device using address 9
>.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling device: (0000:06:04.1usb 1-1.1: reset full speed USB device using address 9
>), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrlSCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver usb 1-1.1: reset full speed USB device using address 9
>(PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irusb 1-1.1: reset full speed USB device using address 9
>q 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath verusb 1-1.1: reset full speed USB device using address 9
>sion 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USSCSI error : <4 0 0 0> return code = 0x6000000
>B device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBMusb 1-1.1: reset full speed USB device using address 9
> MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device usb 1-1.1: reset full speed USB device using address 9
>using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>usb 1-1.1: reset full speed USB device using address 9
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD Gusb 1-1.1: reset full speed USB device using address 9
>CC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tablusb 1-1.1: reset full speed USB device using address 9
>es: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered pSCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>rotocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device ususb 1-1.1: reset full speed USB device using address 9
>ing address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.usb 1-1.1: reset full speed USB device using address 9
>1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using addreusb 1-1.1: reset full speed USB device using address 9
>ss 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 9
>device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speeSCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>d USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-usb 1-1.1: reset full speed USB device using address 9
>1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 9
>ress 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resusb 1-1.1: reset full speed USB device using address 9
>et full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return csr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>ode = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 9
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        usb 1-1.1: reset full speed USB device using address 9
>Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extendeusb 1-1.1: reset full speed USB device using address 9
>d sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reseusb 1-1.1: reset full speed USB device using address 9
>t full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 9
>
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: hostusb 1-1.1: reset full speed USB device using address 9
> 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed Uusb 1-1.1: reset full speed USB device using address 9
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usb 1-1.1: new full speed USB device using address 10
>
>probe_bus_pseries: processing cscsi5 : SCSI emulation for USB Mass Storage devices
>000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>probe_bus_pseries: processing c0sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>00000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.2usb 1-1.1: reset full speed USB device using address 10
>20:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installinusb 1-1.1: reset full speed USB device using address 10
>g public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switchiusb 1-1.1: reset full speed USB device using address 10
>ng to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/165sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>50 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initiausb 1-1.1: reset full speed USB device using address 10
>lized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>ususb 1-1.1: reset full speed USB device using address 10
>bcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (ordusb 1-1.1: reset full speed USB device using address 10
>er: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Regsr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>istered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>liusb 1-1.1: reset full speed USB device using address 10
>bata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E usb 1-1.1: reset full speed USB device using address 10
>Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr usb 1-1.1: reset full speed USB device using address 10
>sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (usb 1-1.1: reset full speed USB device using address 10
>2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppusb 1-1.1: reset full speed USB device using address 10
>y controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6cSCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCIusb 1-1.1: reset full speed USB device using address 10
>: Enabling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Hostusb 1-1.1: reset full speed USB device using address 10
> Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci memusb 1-1.1: reset full speed USB device using address 10
> e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable SCSI error : <5 0 0 0> return code = 0x6000000
>port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval usb 1-1.1: reset full speed USB device using address 10
>5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1usb 1-1.1: reset full speed USB device using address 10
>-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using usb 1-1.1: reset full speed USB device using address 10
>address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub usb 1-1.1: reset full speed USB device using address 10
>1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for Uusb 1-1.1: reset full speed USB device using address 10
>SB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2,SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter cousb 1-1.1: reset full speed USB device using address 10
>re team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divertusb 1-1.1: reset full speed USB device using address 10
>_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense cusb 1-1.1: reset full speed USB device using address 10
>lass 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Senusb 1-1.1: reset full speed USB device using address 10
>se
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USBusb 1-1.1: reset full speed USB device using address 10
> device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 10
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return codusb 1-1.1: reset full speed USB device using address 10
>e = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.usb 1-1.1: reset full speed USB device using address 10
>1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 10
>ress 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.usb 1-1.1: reset full speed USB device using address 10
>1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDRusb 1-1.1: reset full speed USB device using address 10
>OM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset fusb 1-1.1: reset full speed USB device using address 10
>ull speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.usb 1-1.1: reset full speed USB device using address 10
>1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 10
>device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        SSCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 10
>sing address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed Uusb 1-1.1: reset full speed USB device using address 10
>SB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resusb 1-1.1: reset full speed USB device using address 10
>et full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>usb 1-1.1: reset full speed USB device using address 10
>
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full spusb 1-1.1: reset full speed USB device using address 10
>eed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>Mu-ZZ0Z:~ # dmesgusb 1-1.1: new full speed USB device using address 11
>scsi6 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi6, channel 0, id 0, lun 0
>USB Mass Storage device found at 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error: host 6 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error : <6 0 0 0> return code = 0x70000
>usb 1-1.1: USB disconnect, address 11
>scsi6 (0:0): rejecting I/O to device being removed
>scsi6 (0:0): rejecting I/O to device being removed
>
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register usb 1-1.1: new full speed USB device using address 12
>device 4003
>eBus Device Driver
>scan-log-dump noscsi7 : SCSI emulation for USB Mass Storage devices
>t implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>096 bytes)
>SELinux:  Registerinsr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi7, channel 0, id 0, lun 0
>USB Mass Storage device found at 12
>g netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Husb 1-1.1: reset full speed USB device using address 12
>at, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vusb 1-1.1: reset full speed USB device using address 12
>io_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning:usb 1-1.1: reset full speed USB device using address 12
> no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: regissr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>tered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB usb 1-1.1: reset full speed USB device using address 12
>HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: usb 1-1.1: reset full speed USB device using address 12
>10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSIusb 1-1.1: reset full speed USB device using address 12
> Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsisr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSusb 1-1.1: reset full speed USB device using address 12
>I device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device typeusb 1-1.1: reset full speed USB device using address 12
> 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Susb 1-1.1: reset full speed USB device using address 12
>ELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [pausb 1-1.1: reset full speed USB device using address 12
>rtno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>usb 1-1.1: reset full speed USB device using address 12
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>usb 1-1.1: reset full speed USB device using address 12
>
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus regusb 1-1.1: reset full speed USB device using address 12
>istered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit inusb 1-1.1: reset full speed USB device using address 12
>terval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 KSCSI error : <7 0 0 0> return code = 0x6000000
>eyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full susb 1-1.1: reset full speed USB device using address 12
>peed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USBusb 1-1.1: reset full speed USB device using address 12
> Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: usb 1-1.1: reset full speed USB device using address 12
>4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb 1-1.1: reset full speed USB device using address 12
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pciusb 1-1.1: reset full speed USB device using address 12
>] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded butSCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB devusb 1-1.1: reset full speed USB device using address 12
>ice using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device usinusb 1-1.1: reset full speed USB device using address 12
>g address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: hostusb 1-1.1: reset full speed USB device using address 12
> 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6usb 1-1.1: reset full speed USB device using address 12
>000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetSCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 reusb 1-1.1: reset full speed USB device using address 12
>turn code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 12
> full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl)usb 1-1.1: reset full speed USB device using address 12
> error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetsr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
> full speed USB device using address 5
>usb 1-1.1: reset full speed USBusb 1-1.1: reset full speed USB device using address 12
> device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 12
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>uusb 1-1.1: reset full speed USB device using address 12
>sb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1usb 1-1.1: reset full speed USB device using address 12
>.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-usb 1-1.1: reset full speed USB device using address 12
>1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 12
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, susb 1-1.1: reset full speed USB device using address 12
>ense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device usb 1-1.1: reset full speed USB device using address 12
>using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full spusb 1-1.1: reset full speed USB device using address 12
>eed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speusb 1-1.1: reset full speed USB device using address 12
>ed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, exteSCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>nded sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 12
>device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset fusb 1-1.1: reset full speed USB device using address 12
>ull speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 12
>
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglsr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>evel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emuusb 1-1.1: reset full speed USB device using address 12
>lation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1usb 1-1.1: reset full speed USB device using address 12
>.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi Cusb 1-1.1: reset full speed USB device using address 12
>D-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <7 0 0 0> return code = 0x6000000ddress 9
>
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Susb 1-1.1: reset full speed USB device using address 12
>ense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>usb 1-1.1: reset full speed USB device using address 12
>
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 12
>ress 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full spSCSI error : <7 0 0 0> return code = 0x6000000
>eed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000usb 1-1.1: reset full speed USB device using address 12
>000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 12
>device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1:SCSI error : <7 0 0 0> return code = 0x6000000
> reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command:usb 1-1.1: reset full speed USB device using address 12
> Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 12
>sing address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device ususb 1-1.1: reset full speed USB device using address 12
>ing address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                      usb 1-1.1: reset full speed USB device using address 12
>       ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 12
>
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctusb 1-1.1: reset full speed USB device using address 12
>l) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset fulusb 1-1.1: reset full speed USB device using address 12
>l speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 12
> full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using addressusb 1-1.1: reset full speed USB device using address 12
> 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 12
>device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 1usb 1-1.1: reset full speed USB device using address 12
>0
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 12
>device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.usb 1-1.1: new full speed USB device using address 13
>5.1
>Dquot-cache hash table entries: 512 (order scsi8 : SCSI emulation for USB Mass Storage devices
>0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID:  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
> Red Hat, Inc. (Kernel Module GPsr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi8, channel 0, id 0, lun 0
>USB Mass Storage device found at 13
>G key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frausb 1-1.1: reset full speed USB device using address 13
>me buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM diusb 1-1.1: reset full speed USB device using address 13
>sks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: regisusb 1-1.1: reset full speed USB device using address 13
>tered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol famsr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>ily 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash tusb 1-1.1: reset full speed USB device using address 13
>able entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsyusb 1-1.1: reset full speed USB device using address 13
>stem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initializedusb 1-1.1: reset full speed USB device using address 13
>.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scusb 1-1.1: reset full speed USB device using address 13
>si disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit intervalusb 1-1.1: reset full speed USB device using address 13
> 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:usb 1-1.1: reset full speed USB device using address 13
>04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling deviusb 1-1.1: reset full speed USB device using address 13
>ce: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb usb 1-1.1: reset full speed USB device using address 13
>02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>usb 1-1.1: reset full speed USB device using address 13
>
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mausb 1-1.1: reset full speed USB device using address 13
>pper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBusb 1-1.1: reset full speed USB device using address 13
>M IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub fSCSI error : <8 0 0 0> return code = 0x6000000
>ound
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver.usb 1-1.1: reset full speed USB device using address 13
>..
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Stousb 1-1.1: reset full speed USB device using address 13
>rage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI eusb 1-1.1: reset full speed USB device using address 13
>mulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass usb 1-1.1: reset full speed USB device using address 13
>Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Rusb 1-1.1: reset full speed USB device using address 13
>egistered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset fulusb 1-1.1: reset full speed USB device using address 13
>l speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speeusb 1-1.1: reset full speed USB device using address 13
>d USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Seusb 1-1.1: reset full speed USB device using address 13
>nse class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 13
>ress 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended senusb 1-1.1: reset full speed USB device using address 13
>se 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 13
>
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense keusb 1-1.1: reset full speed USB device using address 13
>y No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 13
>sing address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 13
>sing address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1:usb 1-1.1: reset full speed USB device using address 13
> reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recogSCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>nize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6usb 1-1.1: reset full speed USB device using address 13
>000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset fuusb 1-1.1: USB disconnect, address 13
>ll speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: USB disconnect, address 10
>usb 1-1.1: new full speed USB device using address 11
>scsi6 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi6, channel 0, id 0, lun 0
>USB Mass Storage device found at 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error: host 6 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error : <6 0 0 0> return code = 0x70000
>usb 1-1.1: USB disconnect, address 11
>scsi6 (0:0): rejecting I/O to device being removed
>scsi6 (0:0): rejecting I/O to device being removed
>usb 1-1.1: new full speed USB device using address 12
>scsi7 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi7, channel 0, id 0, lun 0
>USB Mass Storage device found at 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink sockeusb 1-1.1: new full speed USB device using address 14
>t (disabled)
>audit(1181594383.220:1): initialized
>scsi9 : SCSI emulation for USB Mass Storage devices
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error,   Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi9, channel 0, id 0, lun 0
>USB Mass Storage device found at 14
>Severity: 2
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controllerusb 1-1.1: reset full speed USB device using address 14
> Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registusb 1-1.1: reset full speed USB device using address 14
>ered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platfousb 1-1.1: reset full speed USB device using address 14
>rm E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-csr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>ore.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md:usb 1-1.1: reset full speed USB device using address 14
> md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configurusb 1-1.1: reset full speed USB device using address 14
>ed (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2usb 1-1.1: reset full speed USB device using address 14
>006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSIusb 1-1.1: reset full speed USB device using address 14
> device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  usb 1-1.1: reset full speed USB device using address 14
>Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilterusb 1-1.1: reset full speed USB device using address 14
> hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000Busb 1-1.1: reset full speed USB device using address 14
>aseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000Busb 1-1.1: reset full speed USB device using address 14
>aseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI HostSCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>usb 1-1.1: reset full speed USB device using address 14
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: ausb 1-1.1: reset full speed USB device using address 14
>utorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-usb 1-1.1: reset full speed USB device using address 14
>0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>SCSI error : <9 0 0 0> return code = 0x6000000
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-usb 1-1.1: reset full speed USB device using address 14
>1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
> usb 1-1.1: reset full speed USB device using address 14
> Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniformusb 1-1.1: reset full speed USB device using address 14
> CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI rusb 1-1.1: reset full speed USB device using address 14
>evision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter cousb 1-1.1: reset full speed USB device using address 14
>re team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459bSCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB deviceusb 1-1.1: reset full speed USB device using address 14
> using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: rusb 1-1.1: reset full speed USB device using address 14
>eset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 14
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device usiusb 1-1.1: reset full speed USB device using address 14
>ng address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.usb 1-1.1: reset full speed USB device using address 14
>1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, exteSCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>nded sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 14
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ususb 1-1.1: reset full speed USB device using address 14
>b 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>ususb 1-1.1: reset full speed USB device using address 14
>b 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 14
>lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 14
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>uusb 1-1.1: reset full speed USB device using address 14
>sb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recusb 1-1.1: reset full speed USB device using address 14
>ognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using ausb 1-1.1: reset full speed USB device using address 14
>ddress 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB SCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id usb 1-1.1: reset full speed USB device using address 14
>0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using adusb 1-1.1: reset full speed USB device using address 14
>dress 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 14
>device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI rusb 1-1.1: USB disconnect, address 14
>evision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: USB disconnect, address 10
>usb 1-1.1: new full speed USB device using address 11
>scsi6 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi6, channel 0, id 0, lun 0
>USB Mass Storage device found at 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error: host 6 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error : <6 0 0 0> return code = 0x70000
>usb 1-1.1: USB disconnect, address 11
>scsi6 (0:0): rejecting I/O to device being removed
>scsi6 (0:0): rejecting I/O to device being removed
>usb 1-1.1: new full speed USB device using address 12
>scsi7 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi7, channel 0, id 0, lun 0
>USB Mass Storage device found at 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: USB disconnect, address 12
>usb 1-1.1: new full speed USB device using address 13
>scsi8 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi8, channel 0, id 0, lun 0
>USB Mass Storage device found at 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Tyusb 1-1.1: new full speed USB device using address 15
>pe: Platform Error, Severity: 2
>Initializing Cryscsi10 : SCSI emulation for USB Mass Storage devices
>ptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug P  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>CI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registsr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi10, channel 0, id 0, lun 0
>USB Mass Storage device found at 15
>usb 1-1.1: USB disconnect, address 15
>ered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown device type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, 2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0, internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using address 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation for USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Linux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: USB disconnect, address 10
>usb 1-1.1: new full speed USB device using address 11
>scsi6 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi6, channel 0, id 0, lun 0
>USB Mass Storage device found at 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error: host 6 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error : <6 0 0 0> return code = 0x70000
>usb 1-1.1: USB disconnect, address 11
>scsi6 (0:0): rejecting I/O to device being removed
>scsi6 (0:0): rejecting I/O to device being removed
>usb 1-1.1: new full speed USB device using address 12
>scsi7 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi7, channel 0, id 0, lun 0
>USB Mass Storage device found at 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: USB disconnect, address 12
>usb 1-1.1: new full speed USB device using address 13
>scsi8 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi8, channel 0, id 0, lun 0
>USB Mass Storage device found at 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error : <8 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: USB disconnect, address 13
>usb 1-1.1: new full speed USB device using address 14
>scsi9 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi9, channel 0, id 0, lun 0
>USB Mass Storage device found at 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>Mu-ZZ0Z:~ # dmesg
>Found initrd at 0xc000000002800000:0xc0000000029de000
>firmware_features = 0x1ff55f
>don't know how to print to stdout '/pci@8000000f8000000/pci@7/display@2'
>Partition configured for 2 cpus.
>Starting Linux PPC64 2.6.9-55.EL
>-----------------------------------------------------
>naca                          = 0xc000000000004000
>naca->pftSize                 = 0x19
>naca->debug_switch            = 0x0
>naca->interrupt_controller    = 0x2
>systemcfg                     = 0xc000000000005000
>systemcfg->processorCount     = 0x2
>systemcfg->physicalMemorySize = 0x7a000000
>systemcfg->dCacheL1LineSize   = 0x80
>systemcfg->iCacheL1LineSize   = 0x80
>htab_data.htab                = 0x0000000000000000
>htab_data.num_ptegs           = 0x40000
>-----------------------------------------------------
>[boot]0100 MM Init
>[boot]0100 MM Init Done
>Linux version 2.6.9-55.EL (brewbuilder@js20-bc2-10.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:33:09 EDT 2007
>[boot]0012 Setup Arch
>Top of RAM: 0x7a000000, Total RAM: 0x7a000000
>Memory hole size: 0MB
>get_phb_type: unknown PHB IBM,Logical_PHB
>PPC64 nvram contains 8192 bytes
>Using dedicated idle loop
>On node 0 totalpages: 499712
>  DMA zone: 499712 pages, LIFO batch:16
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>[boot]0015 Setup Done
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet
>[boot]0020 XICS Init
>xics: no ISA interrupt controller
>[boot]0021 XICS Done
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 2697.300000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>freeing bootmem node 0
>Memory: 1947328k/1998848k available (3084k kernel code, 51156k reserved, 1332k data, 538k bss, 216k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=14304)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>Processor 1 found.
>Brought up 2 CPUs
>checking if image is initramfs... it is
>Freeing initrd memory: 1912k freed
>Unable to get OpenPIC IRQ for cascade
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>IOMMU table initialized, virtual merging enabled
>PCI: Probing PCI hardware done
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>probe_bus_pseries: processing c000000079ff9688
>probe_bus_pseries: processing c000000079ff98d0
>probe_bus_pseries: processing c000000079ff9b38
>probe_bus_pseries: processing c000000079ff9d00
>probe_bus_pseries: processing c000000079ff9ee8
>probe_bus_pseries: processing c000000079ffa0d0
>probe_bus_pseries: processing c000000079ffa488
>vio_register_device_common: failed to register device 4003
>eBus Device Driver
>scan-log-dump not implemented on this system
>audit: initializing netlink socket (disabled)
>audit(1181594383.220:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>RTAS daemon started
>RTAS: event: 747, Type: Platform Error, Severity: 2
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D288D5B7FD50AFC9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
>Using unsupported 640x480 pci1002,515e.1002.515e.2 at 100a8000000, depth=8, pitch=640
>Console: switching to colour frame buffer device 80x30
>fb0: Open Firmware frame buffer device on /pci@8000000f8000000/pci@7/display@2
>vio_register_driver: driver hvc_console registering
>HVSI: registered 0 devices
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Warning: no ADB interface detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 216k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ipr: IBM Power RAID SCSI Device Driver version: 2.0.11.4 (November 30, 2006)
>ipr 0000:01:01.0: Found IOA with IRQ: 42
>ipr 0000:01:01.0: Starting IOA initialization sequence.
>ipr 0000:01:01.0: Adapter firmware version: 0616003F
>ipr 0000:01:01.0: IOA initialized.
>scsi0 : IBM 572E Storage Adapter
>Using cfq io scheduler
>  Vendor: IBM-ESXS  Model: ST936701SS        Rev: B516
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 sda2 sda3
>Attacusb 1-1.1: new full speed USB device using address 16
>hed scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi: unknown descsi11 : SCSI emulation for USB Mass Storage devices
>vice type 31
>  Vendor: IBM       Model: 572E001           Rev: 0150
>  Type:   Unknown                            ANSI SCSI revision: 00
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>kjournald starting.  C  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>ommit interval 5 seconds
>EXT3-fsr0: scsi3-mmc ds: mounted filesrive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi11, channel 0, id 0, lun 0
>USB Mass Storage device found at 16
>ystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-55.EL
>Floppy drive(s): fd0 is 2.88M
>floppy0: no floppy controllers found
>tg3.c:v3.64-rh (July 31, usb 1-1.1: reset full speed USB device using address 16
>2006)
>PCI: Enabling device: (0000:06:04.0), cmd 2
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6c
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>PCI: Enabusb 1-1.1: reset full speed USB device using address 16
>ling device: (0000:06:04.1), cmd 2
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(none) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:c9:02:6d
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
>usb 1-1.1: reset full speed USB device using address 16
>
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: irq 35, pci mem e0000000800ab000
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:03:00.1usb 1-1.1: reset full speed USB device using address 16
>: OHCI Host Controller
>ohci_hcd 0000:03:00.1: irq 35, pci mem e0000000800ac000
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>EXT3 FS on dm-0,usb 1-1.1: reset full speed USB device using address 16
> internal journal
>device-mapper: dm-multipath version 1.0.5 loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
>usb 2-1: new full speed USB device using ausb 1-1.1: reset full speed USB device using address 16
>ddress 2
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:03:00.1-1
>usb 1-1: new full speed USB device using address 4
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 esr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>xtents:1
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using address 5
>Initializing USB Mass Storage driver...
>usb 1-1usb 1-1.1: reset full speed USB device using address 16
>.2: new full speed USB device using address 6
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>USB Mass Storage device found at 5
>usbcore: registered new driver usb-storage
>USB usb 1-1.1: reset full speed USB device using address 16
>Mass Storage support registered.
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>usb 1-1.2.3: new full speed USB device using address 7
>scsi2 : SCSI emulation fusb 1-1.1: reset full speed USB device using address 16
>or USB Mass Storage devices
>  Vendor: HL-DT-ST  Model: RW/DVD GCC-4247N  Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
>USB Mass Storage device found at 7
>Lusb 1-1.1: reset full speed USB device using address 16
>inux Kernel Card Services
>  options:  [pci] [cardbus]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>lp: driver loaded but no devices found
>NET: Registered prusb 1-1.1: reset full speed USB device using address 16
>otocol family 10
>Disabled Privacy Extensions on device c000000000459b60(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resetSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) errorusb 1-1.1: reset full speed USB device using address 16
>, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>eth0: no IPv6 routers present
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (iocusb 1-1.1: reset full speed USB device using address 16
>tl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB devusb 1-1.1: reset full speed USB device using address 16
>ice using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speeSCSI error : <11 0 0 0> return code = 0x6000000
>d USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x600usb 1-1.1: reset full speed USB device using address 16
>0000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 usb 1-1.1: reset full speed USB device using address 16
>lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full spusb 1-1.1: reset full speed USB device using address 16
>eed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDRusb 1-1.1: reset full speed USB device using address 16
>OM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset fusb 1-1.1: reset full speed USB device using address 16
>ull speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speeSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>d USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 16
>
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense keusb 1-1.1: reset full speed USB device using address 16
>y No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> rusb 1-1.1: reset full speed USB device using address 16
>eturn code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error : <1 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full spusb 1-1.1: reset full speed USB device using address 16
>eed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset fSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ull speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.usb 1-1.1: reset full speed USB device using address 16
>1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speeusb 1-1.1: reset full speed USB device using address 16
>d USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB devicusb 1-1.1: reset full speed USB device using address 16
>e using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: resusb 1-1.1: reset full speed USB device using address 16
>et full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, eusb 1-1.1: reset full speed USB device using address 16
>xtended sense 0
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: reset full speed USB device using aSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ddress 5
>usb 1-1.1: reset full speed USB device using address 5
>SCSI error: host 1 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 16
>ress 5
>usb 1-1.1: reset full speed USB device using address 5
>usb 1-1.1: USB disconnect, address 5
>SysRq : Changing Loglevel
>Loglevel set to 8
>usb 1-1.1: new full speed USB device using address 8
>scsi3 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
> usb 1-1.1: reset full speed USB device using address 16
> Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x caddy
>Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
>USB Mass Storage device found at 8
>usb 1-1.1: USB disconnect, address 8
>usb 1-1.1: new full speed USB device using address 9
>scsi4 : SCSI emulatiousb 1-1.1: reset full speed USB device using address 16
>n for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi4, channel 0, id 0, lun 0
>USB Mass Storage device usb 1-1.1: reset full speed USB device using address 16
>found at 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 codusb 1-1.1: reset full speed USB device using address 16
>e 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device usb 1-1.1: reset full speed USB device using address 16
>using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full spusb 1-1.1: reset full speed USB device using address 16
>eed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error : <4 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1usb 1-1.1: reset full speed USB device using address 16
>.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 16
>ress 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset usb 1-1.1: reset full speed USB device using address 16
>full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: oldSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using adusb 1-1.1: reset full speed USB device using address 16
>dress 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>SCSI error: host 4 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.usb 1-1.1: reset full speed USB device using address 16
>1: reset full speed USB device using address 9
>usb 1-1.1: reset full speed USB device using address 9
>usb 1-1.1: USB disconnect, address 9
>usb 1-1.1: new full speed USB device using address 10
>scsi5 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Typusb 1-1.1: reset full speed USB device using address 16
>e:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi5, channel 0, id 0, lun 0
>USB Mass Storage device found at 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full susb 1-1.1: reset full speed USB device using address 16
>peed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1usb 1-1.1: reset full speed USB device using address 16
>.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>0 code 0x0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 16
>device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 16
>
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error : <5 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: resetusb 1-1.1: reset full speed USB device using address 16
> full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 16
>sing address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>uusb 1-1.1: reset full speed USB device using address 16
>sb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full sSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>peed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full susb 1-1.1: reset full speed USB device using address 16
>peed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-usb 1-1.1: reset full speed USB device using address 16
>1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: reset full speed USB device using address 10
>SCSI error: host 5 id 0 lun 0 reusb 1-1.1: reset full speed USB device using address 16
>turn code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 10
>usb 1-1.1: USB disconnect, address 10
>usb 1-1.1: new full speed USB device using address 11
>scsi6 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   usb 1-1.1: reset full speed USB device using address 16
>Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi6, channel 0, id 0, lun 0
>USB Mass Storage device found at 11
>usb 1-1.1: reset full speed USB device uusb 1-1.1: reset full speed USB device using address 16
>sing address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended seSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>nse class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>sr0: CDusb 1-1.1: reset full speed USB device using address 16
>ROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using addusb 1-1.1: reset full speed USB device using address 16
>ress 11
>usb 1-1.1: reset full speed USB device using address 11
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error: host 6 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 11
>SCSI error : <6 0 0 0> return code = 0x70000
>usb 1-1.1: USB disconnect, address 11
>scsi6 (0:0): rejecting I/O usb 1-1.1: reset full speed USB device using address 16
>to device being removed
>scsi6 (0:0): rejecting I/O to device being removed
>usb 1-1.1: new full speed USB device using address 12
>scsi7 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSIusb 1-1.1: reset full speed USB device using address 16
> revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi7, channel 0, id 0, lun 0
>USB Mass Storage device found at 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reseusb 1-1.1: reset full speed USB device using address 16
>t full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extendeusb 1-1.1: reset full speed USB device using address 16
>d sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host usb 1-1.1: reset full speed USB device using address 16
>7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1usb 1-1.1: reset full speed USB device using address 16
>.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: hostusb 1-1.1: reset full speed USB device using address 16
> 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USusb 1-1.1: reset full speed USB device using address 16
>B device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1:usb 1-1.1: reset full speed USB device using address 16
> reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 16
>
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 16
>device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>sr0: CDROM (iousb 1-1.1: reset full speed USB device using address 16
>ctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>cdrom: This disc doesn't have any tracks I recognize!
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB deusb 1-1.1: reset full speed USB device using address 16
>vice using address 12
>SCSI error : <7 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error : <7 0 0 0> return code usb 1-1.1: reset full speed USB device using address 16
>= 0x6000000
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: husb 1-1.1: reset full speed USB device using address 16
>ost 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using addresusb 1-1.1: reset full speed USB device using address 16
>s 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB usb 1-1.1: reset full speed USB device using address 16
>device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>usb 1-1.1: reset full speed USB device using address 12
>SCSI error: host 7 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: USB disconnect, address 12
>usb 1-1.1: new full speed USB dusb 1-1.1: reset full speed USB device using address 16
>evice using address 13
>scsi8 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48xSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi8, channel 0, id 0, lun 0
>USB Mass Storage device found at 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-usb 1-1.1: reset full speed USB device using address 16
>1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full susb 1-1.1: reset full speed USB device using address 16
>peed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full susb 1-1.1: reset full speed USB device using address 16
>peed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended usb 1-1.1: reset full speed USB device using address 16
>sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error : <8 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1usb 1-1.1: reset full speed USB device using address 16
>.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: hSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ost 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: resusb 1-1.1: reset full speed USB device using address 16
>et full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using addrusb 1-1.1: reset full speed USB device using address 16
>ess 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: reset full speed USB device using address 13
>SCSI error: host 8 id 0 lun 0 return code = 6000000
>        Sense class 0, sense errusb 1-1.1: reset full speed USB device using address 16
>or 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 13
>usb 1-1.1: USB disconnect, address 13
>usb 1-1.1: new full speed USB device using address 14
>scsi9 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM           usb 1-1.1: reset full speed USB device using address 16
>                  ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi9, channel 0, id 0, lun 0
>USB Mass Storage device found at 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device usb 1-1.1: reset full speed USB device using address 16
>using address 14
>usb 1-1.1: reset full speed USB device using address 14
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB deviceSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
> using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old senseusb 1-1.1: reset full speed USB device using address 16
> key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USBusb 1-1.1: reset full speed USB device using address 16
> device using address 14
>SCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>SCSI error : <9 0 0 0> return code = 0x6000000
>usb 1-1.1: reset full speed usb 1-1.1: reset full speed USB device using address 16
>USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>SCSI error: host 9 id 0 lun 0 return code = 6000000
>        usb 1-1.1: reset full speed USB device using address 16
>Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB devusb 1-1.1: reset full speed USB device using address 16
>ice using address 14
>SCSI error: host 9 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using addrSCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>ess 14
>usb 1-1.1: reset full speed USB device using address 14
>sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
>sr: old sense key No Sense
>Non-extended sense class 0 code 0x0
>usb 1-1.1: reseusb 1-1.1: reset full speed USB device using address 16
>t full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>SCSI error: host 9 id 0 lun 0 return cousb 1-1.1: reset full speed USB device using address 16
>de = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-1.1: reset full speed USB device using address 14
>usb 1-usb 1-1.1: reset full speed USB device using address 16
>1.1: USB disconnect, address 14
>usb 1-1.1: new full speed USB device using address 15
>scsi10 : SCSI emulation for USB Mass Storage devices
>  Vendor: LITE-ON   Model: DVDRW LH-20A1H    Rev: LL07
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 0x/0x usb 1-1.1: reset full speed USB device using address 16
>caddy
>Attached scsi CD-ROM sr0 at scsi10, channel 0, id 0, lun 0
>USB Mass Storage device found at 15
>usb 1-1.1: USB disconnect, address 15
>Mu-ZZ0Z:~ # usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>SCSI error: host 11 id 0 lun 0 return code = 6000000
>        Sense class 0, sense error 0, extended sense 0
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: reset full speed USB device using address 16
>usb 1-1.1: USB disconnect, address 16

Actions: View

Attachments on bug 250816: 160647 | 160648 | 160650