Attachment 160680 Details for Bug 249511 – backtrace

backtrace

error.log (text/plain), 49.63 KB, created by Andy Lawrence on 2007-08-03 23:15:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andy Lawrence

Created: 2007-08-03 23:15:42 UTC

Size: 49.63 KB

patch

obsolete

>Linux version 2.6.22.1-41.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 18:10:34 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262064) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262064
>early_node_map[1] active PFN ranges
>    0:        0 ->   262064
>On node 0 totalpages: 262064
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32433 pages, LIFO batch:7
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7E10, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFB0000, 0034 (r1 A M I  OEMRSDT   4000724 MSFT       97)
>ACPI: FACP 3FFB0200, 0084 (r2 A M I  OEMFACP   4000724 MSFT       97)
>ACPI: DSDT 3FFB0450, 4AED (r1  75D8U 75D8U261      261 INTL  2002026)
>ACPI: FACS 3FFC0000, 0040
>ACPI: APIC 3FFB0390, 0078 (r1 A M I  OEMAPIC   4000724 MSFT       97)
>ACPI: MCFG 3FFB0410, 003C (r1 A M I  OEMMCFG   4000724 MSFT       97)
>ACPI: OEMB 3FFC0040, 0051 (r1 A M I  AMI_OEM   4000724 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
>Built 1 zonelists.  Total pages: 260017
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fecc0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0790000 soft=c0770000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1808.165 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1030636k/1048256k available (2105k kernel code, 16924k reserved, 1111k data, 260k init, 130752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072a000 - 0xc076b000   ( 260 kB)
>      .data : 0xc060e78e - 0xc0724504   (1111 kB)
>      .text : 0xc0400000 - 0xc060e78e   (2105 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3617.50 BogoMIPS (lpj=1808752)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00003940 0000e39d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0791000 soft=c0771000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3615.70 BogoMIPS (lpj=1807852)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00003940 0000e39d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>Total of 2 processors activated (7233.20 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 21:48:07  Date: 07/03/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:80)
>PCI: Probing PCI hardware (bus 80)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:07: iomem range 0xf7dfc000-0xf7dfffff has been reserved
>pnp: 00:07: iomem range 0xffb80000-0xffbfffff could not be reserved
>pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f3b00000-f7bfffff
>  PREFETCH window: bff00000-dfefffff
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: f7c00000-f7cfffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3503k freed
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1186177687.762:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 511F5DD0680EFF29
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA PT880 Ultra chipset
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:253:853
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 858k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 18
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 19, io base 0x0000d480
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 20, io base 0x0000dc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 19, io mem 0xf7fff800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:0f.1: version 0.3.1
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>ata1.00: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATA-5: MAXTOR 4K060H3, A08.1500, max UDMA/100
>ata2.00: 117266688 sectors, multi 16: LBA 
>ata2.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0H, max UDMA/66
>ata2.00: configured for UDMA/100
>ata2.01: configured for UDMA/66
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      MAXTOR 4K060H3   A08. PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 117266688 512-byte hardware sectors (60041 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 117266688 512-byte hardware sectors (60041 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            LITE-ON  DVDRW SOHW-1633S BS0H PQ: 0 ANSI: 5
>sata_via 0000:00:0f.0: version 2.2
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
>sata_via 0000:00:0f.0: routed to hard irq line 5
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 19
>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1186177698.773:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>hpt37x: HPT370A: Bus clock 33MHz.
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 21
>scsi4 : pata_hpt37x
>scsi5 : pata_hpt37x
>ata5: PATA max UDMA/44 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c000 irq 21
>ata6: PATA max UDMA/44 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c008 irq 21
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ata5.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata5.00: 312581808 sectors, multi 16: LBA48 
>ata5.01: ATA-6: WDC WD1200BB-22GUA0, 08.02D08, max UDMA/100
>ata5.01: 234441648 sectors, multi 16: LBA48 
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>ata5.00: configured for UDMA/44
>ata5.01: configured for UDMA/44
>ata6.00: ATA-6: WDC WD1600JB-00EVA0, 15.05R15, max UDMA/100
>ata6.00: 312581808 sectors, multi 16: LBA48 
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ata6.01: ATA-6: WDC WD2500JB-00GVC0, 08.02D08, max UDMA/100
>ata6.01: 488397168 sectors, multi 16: LBA48 
>ata6.00: configured for UDMA/44
>ata6.01: configured for UDMA/44
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 4:0:0:0: [sdc] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>scsi 4:0:1:0: Direct-Access     ATA      WDC WD1200BB-22G 08.0 PQ: 0 ANSI: 5
>sd 4:0:1:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
>sd 4:0:1:0: [sdd] Write Protect is off
>sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:1:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
>sd 4:0:1:0: [sdd] Write Protect is off
>sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 4:0:1:0: [sdd] Attached SCSI disk
>sd 4:0:1:0: Attached scsi generic sg4 type 0
>scsi 5:0:0:0: Direct-Access     ATA      WDC WD1600JB-00E 15.0 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sde] 312581808 512-byte hardware sectors (160042 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sde] 312581808 512-byte hardware sectors (160042 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1
>sd 5:0:0:0: [sde] Attached SCSI disk
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>scsi 5:0:1:0: Direct-Access     ATA      WDC WD2500JB-00G 08.0 PQ: 0 ANSI: 5
>sd 5:0:1:0: [sdf] 488397168 512-byte hardware sectors (250059 MB)
>sd 5:0:1:0: [sdf] Write Protect is off
>sd 5:0:1:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:1:0: [sdf] 488397168 512-byte hardware sectors (250059 MB)
>sd 5:0:1:0: [sdf] Write Protect is off
>sd 5:0:1:0: [sdf] Mode Sense: 00 3a 00 00
>sd 5:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: sdf1
>sd 5:0:1:0: [sdf] Attached SCSI disk
>sd 5:0:1:0: Attached scsi generic sg6 type 0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
>eth0: VIA Rhine II at 0xf7fffc00, 00:19:66:09:5c:df, IRQ 20.
>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 22
>e1000: 0000:00:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:2e:f5:a8
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
>ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:80:01.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>loop: module loaded
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>md: md0 stopped.
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sde1>
>md: bind<sdf1>
>md: bind<sda1>
>md: raid0 personality registered for level 0
>md0: setting max_sectors to 256, segment boundary to 65535
>raid0: looking at sda1
>raid0:   comparing sda1(244195840) with sda1(244195840)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdf1
>raid0:   comparing sdf1(244195840) with sda1(244195840)
>raid0:   EQUAL
>raid0: looking at sde1
>raid0:   comparing sde1(156288256) with sda1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sde1(156288256) with sdf1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sde1(156288256) with sde1(156288256)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 2 zones
>raid0: looking at sdd1
>raid0:   comparing sdd1(117218176) with sda1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sdd1(117218176) with sdf1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sdd1(117218176) with sde1(156288256)
>raid0:   NOT EQUAL
>raid0:   comparing sdd1(117218176) with sdd1(117218176)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 3 zones
>raid0: looking at sdc1
>raid0:   comparing sdc1(156288256) with sda1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sdc1(156288256) with sdf1(244195840)
>raid0:   NOT EQUAL
>raid0:   comparing sdc1(156288256) with sde1(156288256)
>raid0:   EQUAL
>raid0: FINAL 3 zones
>raid0: zone 1
>raid0: checking sda1 ... contained as device 0
>  (244195840) is smallest!.
>raid0: checking sdc1 ... contained as device 1
>  (156288256) is smallest!.
>raid0: checking sdd1 ... nope.
>raid0: checking sde1 ... contained as device 2
>raid0: checking sdf1 ... contained as device 3
>raid0: zone->nb_dev: 4, size: 156280320
>raid0: current zone offset: 156288256
>raid0: zone 2
>raid0: checking sda1 ... contained as device 0
>  (244195840) is smallest!.
>raid0: checking sdc1 ... nope.
>raid0: checking sdd1 ... nope.
>raid0: checking sde1 ... nope.
>raid0: checking sdf1 ... contained as device 1
>raid0: zone->nb_dev: 2, size: 175815168
>raid0: current zone offset: 244195840
>raid0: done.
>raid0 : md_size is 918186368 blocks.
>raid0 : conf->hash_spacing is 156280320 blocks.
>raid0 : nb_zone is 6.
>raid0 : Allocating 24 bytes for hash.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8189 buckets, 65512 max)
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>eth1: link down
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>audit(1186177734.696:3): audit_pid=2281 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>i2c-adapter i2c-1: SMBus Quick command not supported, can't probe for chips
>i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips
>i2c-adapter i2c-3: SMBus Quick command not supported, can't probe for chips
>w83627hf: Found W83697HF chip at 0x290
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>eth0: no IPv6 routers present
>Bridge firewalling registered
>virbr0: no IPv6 routers present
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.00: qc timeout (cmd 0xf8)
>ata2.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (117266688)
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.01: limited to UDMA/33 due to 40-wire cable
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: soft resetting port
>ata2.00: qc timeout (cmd 0xf8)
>ata2.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (117266688)
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2.00: limiting speed to UDMA/33:PIO3
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: soft resetting port
>ata2.00: qc timeout (cmd 0xf8)
>ata2.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (117266688)
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2.00: disabled
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.01: failed to set xfermode (err_mask=0x40)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/33
>ata2: EH complete
>ata2.01: limiting speed to UDMA/25:PIO4
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>sd 1:0:0:0: [sdb] READ CAPACITY failed
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>sd 1:0:0:0: [sdb] Sense not available.
>end_request: I/O error, dev sdb, sector 395061
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 395317
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 65231285
>Buffer I/O error on device dm-0, logical block 8127757
>lost page write due to I/O error on dm-0
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 78676853
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 78676877
>Buffer I/O error on device dm-0, logical block 9808456
>Buffer I/O error on device dm-0, logical block 9808453
>lost page write due to I/O error on dm-0
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 9808454
>Buffer I/O error on device dm-0, logical block 9808457
>lost page write due to I/O error on dm-0
>lost page write due to I/O error on dm-0
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 78676973
>Buffer I/O error on device dm-0, logical block 9808468
>lost page write due to I/O error on dm-0
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 78677485
>Buffer I/O error on device dm-0, logical block 9808532
>lost page write due to I/O error on dm-0
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>Buffer I/O error on device dm-0, logical block 9808533
>lost page write due to I/O error on dm-0
>end_request: I/O error, dev sdb, sector 78677549
>Buffer I/O error on device dm-0, logical block 9808534
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 9808540
>lost page write due to I/O error on dm-0
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 78678013
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 80549405
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 80549469
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 80550917
>sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>end_request: I/O error, dev sdb, sector 80551413
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 1:0:0:0: [sdb] Asking for cache data failed
>sd 1:0:0:0: [sdb] Assuming drive cache: write through
>Aborting journal on device dm-0.
>EXT3-fs error (device dm-0) in ext3_reserve_inode_write: Journal has aborted
>sr0: CDROM (ioctl) error, command: <2>EXT3-fs error (device dm-0) in ext3_dirty_inode: Journal has aborted
>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ext3_abort called.
>EXT3-fs error (device dm-0): ext3_journal_start_sb: Detected aborted journal
>Remounting filesystem read-only
>EXT3-fs error (device dm-0) in ext3_reserve_inode_write: Journal has aborted
>__journal_remove_journal_head: freeing b_committed_data
>journal commit I/O error
>printk: 25 messages suppressed.
>Buffer I/O error on device dm-0, logical block 3
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 196771
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 360595
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 0
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 360597
>lost page write due to I/O error on dm-0
>Buffer I/O error on device dm-0, logical block 3997699
>lost page write due to I/O error on dm-0
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for UDMA/25
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.01: limiting speed to PIO4
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO4
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO4
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO4
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO4
>ata2: EH complete
>ata2.01: limiting speed to PIO3
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO3
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO3
>ata2: EH complete
>sr 1:0:1:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO3
>ata2: EH complete
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #9797720 offset 0
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO3
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: limiting speed to PIO0
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=13960218, block=13959202
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>sr 1:0:1:0: ioctl_internal_command return code = 8000002
>   : Sense Key : Aborted Command [current] [descriptor]
>   : Add. Sense: No additional sense information
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00 00
>sr: Sense Key : Aborted Command [current] [descriptor]
>sr: Add. Sense: No additional sense information
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 
>         res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata2: soft resetting port
>ata2.01: configured for PIO0
>ata2: EH complete
>ata2.01: qc timeout (cmd 0xa0)
>ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:20/00:00:00:00:00/b0 Emask 0x5 (timeout)
>ata2: soft resetting port
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2: port is slow to respond, please be patient (Status 0x80)
>ata2: device not ready (errno=-16), forcing hardreset
>ata2: soft resetting port
>ata2: port is slow to respond, please be patient (Status 0xd0)
>ata2: SRST failed (errno=-16)
>ata2: soft resetting port
>ata2.01: qc timeout (cmd 0xa1)
>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
>ata2.01: revalidation failed (errno=-5)
>ata2.01: disabled
>ata2: EH complete
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #9797720 offset 0
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=14027040, block=14024778
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=14026792, block=14024771
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=689133, block=688161
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=66379, block=65564
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=14028044, block=14024810
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=13780307, block=13763116
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=13994482, block=13992017
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_find_entry: reading directory #558970 offset 0
>EXT3-fs error (device dm-0): ext3_get_inode_loc: unable to read inode block - inode=9797723, block=9797636

Actions: View

Attachments on bug 249511: 159912 | 159955 | 159968 | 160680