Attachment 160766 Details for Bug 250824 – dmesg for the machine concerned

dmesg for the machine concerned

dmesg.txt (text/plain), 24.37 KB, created by Paul D on 2007-08-06 19:38:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul D

Created: 2007-08-06 19:38:27 UTC

Size: 24.37 KB

patch

obsolete

>Linux version 2.6.22.1-41.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 18:21:43 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
> BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
> BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FA4C0, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FF80100, 004C (r1 A M I  OEMXSDT  10000630 MSFT       97)
>ACPI: FACP 7FF80290, 00F4 (r3 A M I  OEMFACP  10000630 MSFT       97)
>ACPI: DSDT 7FF80420, 9642 (r1  A0520 A0520000        0 INTL  2002026)
>ACPI: FACS 7FF8E000, 0040
>ACPI: APIC 7FF80390, 008C (r1 A M I  OEMAPIC  10000630 MSFT       97)
>ACPI: OEMB 7FF8E040, 006B (r1 A M I  AMI_OEM  10000630 MSFT       97)
>ACPI: HPET 7FF89A70, 0038 (r1 A M I  OEMHPET  10000630 MSFT       97)
>ACPI: MCFG 7FF89AB0, 003C (r1 A M I  OEMMCFG  10000630 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ff80000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524160) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ff80000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524160
>On node 0 totalpages: 524063
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1300 pages reserved
>  DMA zone: 2643 pages, LIFO batch:0
>  DMA32 zone: 7110 pages used for memmap
>  DMA32 zone: 512954 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfec10000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e5000
>swsusp: Registered nosave memory region: 00000000000e5000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515597
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2136.988 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2058932k/2096640k available (2362k kernel code, 37320k reserved, 1401k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4276.38 BogoMIPS (lpj=2138191)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 16695214
>Detected 16.695 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4274.05 BogoMIPS (lpj=2137028)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.PXHA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faa00000-feafffff
>  PREFETCH window: cff00000-efefffff
>PCI: Bridge: 0000:05:02.0
>  IO window: disabled.
>  MEM window: fa900000-fa9fffff
>  PREFETCH window: cf700000-cfefffff
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: fa900000-fa9fffff
>  PREFETCH window: cf700000-cfefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fa900000-fa9fffff
>  PREFETCH window: cf700000-cfefffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: fa800000-fa8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: b000-bfff
>  MEM window: fa700000-fa7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-afff
>  MEM window: fa600000-fa6fffff
>  PREFETCH window: 88000000-880fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3079k freed
>audit: initializing netlink socket (disabled)
>audit(1186422009.455:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8321A2A758C22C88
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:07:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Warning (tbutils-0158): Incorrect checksum in table [SSDT] -  34, should be 3B [20070126]
>ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  8E, should be 89 [20070126]
>ACPI: SSDT 7FF89AF0, 02E3 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: SSDT 7FF89DE0, 02DA (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 23
>ata4: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 23
>ata3.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
>ata3.00: 72303840 sectors, multi 16: LBA48 
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/100
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 4 ports detected
>ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB00, max UDMA/33
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/33
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183A SB00 PQ: 0 ANSI: 5
>usb 4-2: new low speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>input:   USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.3-2
>input:   USB Keyboard as /class/input/input2
>input: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.3-2
>usb 4-1.1: new low speed USB device using uhci_hcd and address 4
>usb 4-1.1: configuration #1 chosen from 1 choice
>input: Mitsumi Sony Quick Scroll Mouse (USB) as /class/input/input3
>input: USB HID v1.00 Mouse [Mitsumi Sony Quick Scroll Mouse (USB)] on usb-0000:00:1d.3-1.1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1186422014.504:2): selinux=0 auid=4294967295
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 21
>skge 1.11 addr 0xfa6f4000 irq 21 chip Yukon-Lite rev 9
>skge eth0: addr 00:18:f3:46:83:4c
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.14 addr 0xfa8fc000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:18:f3:46:83:4b
>ACPI: PCI Interrupt 0000:06:0e.0[A] -> GSI 30 (level, low) -> IRQ 30
>ARECA RAID ADAPTER4: FIRMWARE VERSION V1.43 2007-4-17  
>scsi4 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
>        Driver Version 1.20.00.13
>scsi 4:0:0:0: Direct-Access     Areca    ARC-1160-VOL#00  R001 PQ: 0 ANSI: 5
>scsi 4:0:0:1: Direct-Access     Areca    ARC-1160-VOL#01  R001 PQ: 0 ANSI: 5
>scsi 4:0:16:0: Processor         Areca    RAID controller  R001 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
>sd 4:0:0:0: [sdb] 5859373056 512-byte hardware sectors (2999999 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: cb 00 00 08
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
>sd 4:0:0:0: [sdb] 5859373056 512-byte hardware sectors (2999999 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: cb 00 00 08
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:1: [sdc] 1953123840 512-byte hardware sectors (999999 MB)
>sd 4:0:0:1: [sdc] Write Protect is off
>sd 4:0:0:1: [sdc] Mode Sense: cb 00 00 08
>sd 4:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:1: [sdc] 1953123840 512-byte hardware sectors (999999 MB)
>sd 4:0:0:1: [sdc] Write Protect is off
>sd 4:0:0:1: [sdc] Mode Sense: cb 00 00 08
>sd 4:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: unknown partition table
>sd 4:0:0:1: [sdc] Attached SCSI disk
>sd 4:0:0:1: Attached scsi generic sg3 type 0
>scsi 4:0:16:0: Attached scsi generic sg4 type 3
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>zaptel: no version for "struct_module" found: kernel tainted.
>Zapata Telephony Interface Registered on major 196
>Zaptel Version: 1.2.19
>Zaptel Echo Canceller: KB1
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>Freshmaker version: 73
>Freshmaker passed register test
>nvidia: module license 'NVIDIA' taints kernel.
>Module 0: Installed -- AUTO FXO (FCC mode)
>Module 1: Installed -- AUTO FXO (FCC mode)
>Module 2: Installed -- AUTO FXO (FCC mode)
>Module 3: Installed -- AUTO FXO (FCC mode)
>firewire_core: created new fw device fw0 (0 config rom retries)
>Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.11  Wed Jun 13 16:33:22 PDT 2007
>usbcore: registered new interface driver snd-usb-audio
>loop: module loaded
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb1: using ordered data mode
>ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb1: checking transaction log (sdb1)
>ReiserFS: sdb1: Using r5 hash to sort names
>Adding 2048276k swap on /dev/sda2.  Priority:-1 extents:1 across:2048276k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Registered Tormenta2 PCI
>wctdm24xxp: Unknown symbol pci_module_init
>usbcore: registered new interface driver wcusb
>Wildcard USB FXS Interface driver registered
>Registered tone zone 0 (United States / North America)
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1186418442.234:3): audit_pid=2023 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>Zaptel Transcoder support loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 250824: 160652 | 160766