Attachment 160816 Details for Bug 251157 – scsconfig.log

scsconfig.log

scsconfig.log (text/plain), 36.04 KB, created by Paolo on 2007-08-07 15:17:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paolo

Created: 2007-08-07 15:17:19 UTC

Size: 36.04 KB

patch

obsolete

>------- System Config Soundcard Log --------
>mar ago  7 17:05:09 CEST 2007
>
>------- lspci --------
>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
>00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
>00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
>01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
>02:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
>02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
>02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
>
>------- lspci -vn --------
>00:00.0 0600: 1002:5a31 (rev 01)
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64
>
>00:01.0 0604: 1002:5a3f (prog-if 00 [Normal decode])
>	Flags: bus master, 66MHz, medium devsel, latency 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: c0100000-c01fffff
>	Prefetchable memory behind bridge: d0000000-dfffffff
>	Capabilities: [b0] Subsystem: 1002:5a3f
>
>00:12.0 0101: 1002:4379 (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
>	I/O ports at 8440 [size=8]
>	I/O ports at 8430 [size=4]
>	I/O ports at 8420 [size=8]
>	I/O ports at 8410 [size=4]
>	I/O ports at 8400 [size=16]
>	Memory at c0004000 (32-bit, non-prefetchable) [size=512]
>	[virtual] Expansion ROM at 24000000 [disabled] [size=512K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>00:13.0 0c03: 1002:4374 (rev 80) (prog-if 10 [OHCI])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
>	Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>00:13.1 0c03: 1002:4375 (rev 80) (prog-if 10 [OHCI])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
>	Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>00:13.2 0c03: 1002:4373 (rev 80) (prog-if 20 [EHCI])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
>	Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>00:14.0 0c05: 1002:4372 (rev 81)
>	Subsystem: 1179:ff10
>	Flags: 66MHz, medium devsel
>	I/O ports at 8450 [size=16]
>	Memory at c0004400 (32-bit, non-prefetchable) [size=1K]
>
>00:14.1 0101: 1002:4376 (rev 80) (prog-if 8a [Master SecP PriP])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at 8460 [size=16]
>	Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>00:14.2 0403: 1002:437b (rev 01)
>	Subsystem: 1179:ff10
>	Flags: bus master, slow devsel, latency 64, IRQ 19
>	Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>
>00:14.3 0601: 1002:4377 (rev 80)
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 0
>
>00:14.4 0604: 1002:4371 (rev 80) (prog-if 01 [Subtractive decode])
>	Flags: bus master, 66MHz, medium devsel, latency 64
>	Bus: primary=00, secondary=02, subordinate=04, sec-latency=64
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: c0200000-c02fffff
>	Prefetchable memory behind bridge: 20000000-23ffffff
>
>01:05.0 0300: 1002:5a62 (prog-if 00 [VGA])
>	Subsystem: 1179:ff10
>	Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 22
>	Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	I/O ports at 9000 [size=256]
>	Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>
>02:04.0 0200: 168c:001a (rev 01)
>	Subsystem: 144f:7094
>	Flags: medium devsel, IRQ 11
>	Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [44] Power Management version 2
>
>02:06.0 0607: 1524:1410 (rev 01)
>	Subsystem: 1179:ff10
>	Flags: bus master, medium devsel, latency 168, IRQ 16
>	Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
>	Memory window 0: 20000000-23fff000 (prefetchable)
>	Memory window 1: 28000000-2bfff000
>	I/O window 0: 0000a400-0000a4ff
>	I/O window 1: 0000a800-0000a8ff
>	16-bit legacy interface ports at 0001
>
>02:07.0 0200: 10ec:8139 (rev 10)
>	Subsystem: 1179:ff10
>	Flags: bus master, medium devsel, latency 64, IRQ 20
>	I/O ports at a000 [size=256]
>	Memory at c0215000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>
>02:0a.0 0c00: 104c:8026 (prog-if 10 [OHCI])
>	Subsystem: 1179:ff10
>	Flags: bus master, medium devsel, latency 64, IRQ 18
>	Memory at c0215800 (32-bit, non-prefetchable) [size=2K]
>	Memory at c0210000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>
>------- lsmod --------
>Module                  Size  Used by
>nls_utf8                6209  0 
>autofs4                24645  2 
>hidp                   26433  2 
>rfcomm                 43481  0 
>l2cap                  30145  10 hidp,rfcomm
>bluetooth              57253  5 hidp,rfcomm,l2cap
>sunrpc                159133  1 
>dm_multipath           21705  0 
>video                  21065  0 
>sbs                    19173  0 
>i2c_ec                  9281  1 sbs
>button                 12113  0 
>dock                   13669  0 
>battery                14149  0 
>ac                      9413  0 
>ipv6                  276673  28 
>parport_pc             29797  0 
>lp                     15977  0 
>parport                38025  2 parport_pc,lp
>loop                   19785  0 
>8139too                29249  0 
>8139cp                 26689  0 
>mii                     9409  2 8139too,8139cp
>serio_raw              10821  0 
>fw_ohci                19649  0 
>fw_core                42625  1 fw_ohci
>snd_hda_intel          24409  3 
>snd_hda_codec         202689  1 snd_hda_intel
>snd_seq_dummy           7877  0 
>snd_seq_oss            33345  0 
>snd_seq_midi_event     11073  1 snd_seq_oss
>snd_seq                50353  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         11853  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            43489  0 
>snd_mixer_oss          19393  2 snd_pcm_oss
>snd_pcm                74565  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
>snd_timer              24773  2 snd_seq,snd_pcm
>snd                    53189  13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore              11553  2 snd
>snd_page_alloc         13769  2 snd_hda_intel,snd_pcm
>sr_mod                 20197  0 
>cdrom                  37217  1 sr_mod
>pcspkr                  7105  0 
>joydev                 13441  0 
>sg                     37213  0 
>i2c_piix4              12493  0 
>i2c_core               24641  2 i2c_ec,i2c_piix4
>dm_snapshot            20709  0 
>dm_zero                 6209  0 
>dm_mirror              24277  0 
>dm_mod                 57229  9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>pata_atiixp            12352  0 
>sata_sil               15433  2 
>ata_generic            12101  0 
>libata                115417  3 pata_atiixp,sata_sil,ata_generic
>sd_mod                 23873  3 
>scsi_mod              137549  4 sr_mod,sg,libata,sd_mod
>ext3                  125385  2 
>jbd                    59881  1 ext3
>mbcache                12357  1 ext3
>ehci_hcd               35405  0 
>ohci_hcd               23749  0 
>uhci_hcd               26833  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 8139too
>alias scsi_hostadapter pata_atiixp
>alias scsi_hostadapter1 sata_sil
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0  
>options snd-hda-intel index=0  
>
>------- /etc/asound.conf --------
>
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: SB [HDA ATI SB], device 0: ALC861 Analog [ALC861 Analog]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pswitch
>  Playback channels: Front Left - Front Right
>  Mono:
>  Front Left: Playback [on]
>  Front Right: Playback [on]
>Simple mixer control 'PCM',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 181 [71%] [-14.80dB]
>  Front Right: Playback 181 [71%] [-14.80dB]
>Simple mixer control 'Front Mic',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [off]
>Simple mixer control 'Line',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [off]
>Simple mixer control 'CD',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [on]
>Simple mixer control 'Mic',0
>  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Front Left - Front Right
>  Capture channels: Mono
>  Limits: Playback 0 - 23
>  Mono: Capture [off]
>  Front Left: Playback 0 [0%] [-36.00dB] [off]
>  Front Right: Playback 0 [0%] [-36.00dB] [off]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 13
>  Front Left: Capture 7 [54%] [15.00dB] [on]
>  Front Right: Capture 7 [54%] [15.00dB] [on]
>Simple mixer control 'Mixer',0
>  Capabilities: cswitch cswitch-joined cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Mono
>  Mono: Capture [off]
>Simple mixer control 'Caller ID',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>Simple mixer control 'Off-hook',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-1.fc7
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-1.fc7
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
>00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc IXP SB400 PCI-PCI Bridge"
>vendorId: 1002
>deviceId: 4371
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  4
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc IXP SB400 PCI-ISA Bridge"
>vendorId: 1002
>deviceId: 4377
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: i2c-piix4
>desc: "ATI Technologies Inc IXP SB400 SMBus Controller"
>vendorId: 1002
>deviceId: 4372
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RS480 PCI Bridge"
>vendorId: 1002
>deviceId: 5a3f
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc Unknown device 5a31"
>vendorId: 1002
>deviceId: 5a31
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Lid Switch"
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3228.fc7 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3228.fc7 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3228.fc7 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3228.fc7 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.21-1.3228.fc7 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.21-1.3228.fc7 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (CM)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "SYN1902"
>deviceId: SYN1902
>compat: SYN1100,SYN0002,PNP0f13,SYN1902
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: 8139too
>desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+"
>network.hwaddr: 00:a0:d1:31:ba:38
>vendorId: 10ec
>deviceId: 8139
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  7
>pcifn:  0
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: synaptics
>desc: "SynPS/2 Synaptics TouchPad"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "ATI Technologies Inc SB450 HDA Audio"
>vendorId: 1002
>deviceId: 437b
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  2
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "MATSHITA DVD-RAM UJ-841S"
>host: 3
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RC410 [Radeon Xpress 200M]"
>video.xdriver: radeon
>vendorId: 1002
>deviceId: 5a62
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  5
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA HTS541080G9SA00"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB2 Host Controller"
>vendorId: 1002
>deviceId: 4373
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB Host Controller"
>vendorId: 1002
>deviceId: 4375
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB Host Controller"
>vendorId: 1002
>deviceId: 4374
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  0
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "ENE Technology Inc CB1410 Cardbus Controller"
>vendorId: 1524
>deviceId: 1410
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  6
>pcifn:  0
>-
>class: FIREWIRE
>bus: PCI
>detached: 0
>driver: fw-ohci
>desc: "Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)"
>vendorId: 104c
>deviceId: 8026
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  a
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_generic
>desc: "ATI Technologies Inc Standard Dual Channel PCI IDE Controller"
>vendorId: 1002
>deviceId: 4376
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  1
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: sata_sil
>desc: "ATI Technologies Inc 4379 Serial ATA Controller"
>vendorId: 1002
>deviceId: 4379
>subVendorId: 1179
>subDeviceId: ff10
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 12
>pcifn:  0
>
>------- dmesg --------
>Linux version 2.6.21-1.3228.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Jun 12 15:37:31 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001dda0000 end: 000000001dea0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001dea0000 size: 0000000000010000 end: 000000001deb0000 type: 3
>copy_e820_map() start: 000000001deb0000 size: 0000000000050000 end: 000000001df00000 type: 4
>copy_e820_map() start: 000000001df00000 size: 0000000000100000 end: 000000001e000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dea0000 (usable)
> BIOS-e820: 000000001dea0000 - 000000001deb0000 (ACPI data)
> BIOS-e820: 000000001deb0000 - 000000001df00000 (ACPI NVS)
> BIOS-e820: 000000001df00000 - 000000001e000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>478MB LOWMEM available.
>found SMP MP-table at 000f7710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122528) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122528
>  HighMem    122528 ->   122528
>early_node_map[1] active PFN ranges
>    0:        0 ->   122528
>On node 0 totalpages: 122528
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 925 pages used for memmap
>  Normal zone: 117507 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F76C0, 0014 (r0 TOSINV)
>ACPI: RSDT 1DEABFB4, 0038 (r1 TOSINV   RSDT    6040000  LTP        0)
>ACPI: FACP 1DEAFEF6, 0074 (r1 TOSINV Goldfish  6040000 ATI     F4240)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
>ACPI: DSDT 1DEAC408, 3AEE (r1 TOSINV    SB450  6040000 MSFT  100000E)
>ACPI: FACS 1DEB0FC0, 0040
>ACPI: APIC 1DEAFF6A, 005A (r1 TOSINV 	 APIC    6040000  LTP        0)
>ACPI: MCFG 1DEAFFC4, 003C (r1 TOSINV   MCFG    6040000  LTP        0)
>ACPI: SSDT 1DEAC1E7, 0221 (r1 TOSINV  Cpu0Cst     3001 INTL 20030224)
>ACPI: SSDT 1DEABFEC, 01FB (r1 TOSINV    CpuPm     3000 INTL 20030224)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1e000000:c2000000)
>Built 1 zonelists.  Total pages: 121571
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1492.996 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 477592k/490112k available (2066k kernel code, 12024k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddea0000   ( 478 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604bc2 - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604bc2   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2987.92 BogoMIPS (lpj=1493964)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9f3ff 00000000 00000000 00002040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
>Total of 1 processors activated (2987.92 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time: 16:25:43  Date: 07/07/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd82c, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: Power Resource [PFA1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
>pnp: 00:08: ioport range 0x220-0x22f has been reserved
>pnp: 00:08: ioport range 0x400-0x401 has been reserved
>pnp: 00:08: ioport range 0x40b-0x40b has been reserved
>pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:09: iomem range 0x0-0xfff could not be reserved
>pnp: 00:09: iomem range 0xc0004800-0xc0004fff has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 28000000-2bffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: c0200000-c02fffff
>  PREFETCH window: 20000000-23ffffff
>PCI: Enabling device 0000:02:06.0 (0004 -> 0007)
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 23 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3475k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1186503943.122:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 949CEA51B56F22EC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN1] to D3
>ACPI: Transitioning device [FAN1] to D3
>ACPI: Fan [FAN1] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>ACPI: Thermal Zone [TZCR] (44 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01111002, devctl 0x44
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>cs: IO port probe 0xa000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:608:438
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0007000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
>synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_sil 0000:00:12.0: version 2.1
>PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
>ata1: SATA max UDMA/100 cmd 0xde856080 ctl 0xde85608a bmdma 0xde856000 irq 18
>ata2: SATA max UDMA/100 cmd 0xde8560c0 ctl 0xde8560ca bmdma 0xde856008 irq 18
>scsi0 : sata_sil
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-7: HTS541080G9SA00, MB4OC60D, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>scsi1 : sata_sil
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>ata3: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00018460 irq 14
>ata4: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00018468 irq 15
>scsi2 : pata_atiixp
>ATA: abnormal status 0x7F on port 0x000101f7
>scsi3 : pata_atiixp
>ata4.00: ATAPI, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.50 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1186503955.714:2): selinux=0 auid=4294967295
>ACPI Error (evxfevnt-0383): Could not disable RealTimeClock events [20070126]
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input3
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 18
>fw_ohci: Added fw-ohci device 0000:02:0a.0, OHCI version 1.10
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:02:07.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xde954000, 00:a0:d1:31:ba:38, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>fw_core: created new fw device fw0 (0 config rom retries)
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 22
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 983032k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:983032k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech Optical USB Mouse as /class/input/input7
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-1
>audit(1186496788.874:3): audit_pid=1612 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>ACPI Error (evevent-0305): No installed handler for fixed event [00000000] [20070126]
>hda-intel: Invalid position buffer, using LPIB read method instead.
>ACPI Error (evevent-0305): No installed handler for fixed event [00000000] [20070126]
>

Actions: View

Attachments on bug 251157: 160816