Attachment 160913 Details for Bug 249853 – Boot log from failing 2.6.22 kernel

Boot log from failing 2.6.22 kernel

failing_boot_log.txt (text/plain), 4.97 KB, created by Simon Andrews on 2007-08-08 15:37:11 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Simon Andrews

Created: 2007-08-08 15:37:11 UTC

Size: 4.97 KB

patch

obsolete

>pnp: PnP PCPI found 10 devices
>ACPI: ACPI bus type png unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel: domain hash size = 128
>NetLabel: protocols = UNLABELED CIPSOv4
>NetLabel: unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO Window: disabled
>  MEM window: f4200000-f4ffffff
>  PREFETCH window: fc000000-fcffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
>TCP bind hash table entries: 8192 (order: 4,65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
> it is
>[May have missed some messages here?]
>- Added public key 511F5DD0680EFF29
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpart interface v0.102 (c) Dave Jones
>agpart: Detected an Intel 440BX Chipset.
>agpart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Traslated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:333:788
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 858k
>Red Hat nash version 6.0.9 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:12.2[D] -> Link [LNKD] -> GSI (level, low) -> IRQ
> 11
>uhci_hcd 0000:00:12.2: UHCI Host Controller
>uhci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:12.2: irq 11, io base 0x00001080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>Loading mbcache.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15
>ata1: port is slow to respond, please be patient (Status 0x80)
>ata1: SRST failed (errno=-16)
>ata2.00: ATAPI: CRD-8240B, 1.04, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 1:0:0:0: CD-ROM               LG    CD-ROM CRD-8240B 1.04 PQ: 0 ANSI: 5
>Waiting for driver initialization.
>Loading ata_generic.ko module
>Loading scsi_transport_spi.ko module
>Loading sym53c8xx.ko module
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ
> 11
>sym0: <875> rev 0x26 at pci 0000:00:0d.0 irq 11
>sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
>sym0: SCSI BUS has been reset.
>scsi2 : sym-2.2.3
>scsi: waiting for bus probes to complete ...
>Trying to resume from LABEL=SWAP
>Unable to access resume device (LABEL=SWAP)
>Creating root device.
>Mounting root filesystem.
>mount: could not find filesystem '/dev/root'
>Setting up other filesystems.
>Setting up new root fs
>setuproot: moving /dev failed: No such file or directory
>no fstab.sys, mounting internal defaults
>setuproot: error mounting /proc: No such file or directory
>setuproot: error mounting /sys: No such file or directory
>Switiching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>switchroot: mount failed: No such device or directory
>Booting has failed.
>Kernel panic - not syncing: Attempted to kill init!

Actions: View

Attachments on bug 249853: 160120 | 160121 | 160587 | 160588 | 160883 | 160913 | 202431 | 203951 | 273731