Attachment 161120 Details for Bug 251754 – dmesg from kernel 2.6.22-2.39.fc6

dmesg from kernel 2.6.22-2.39.fc6

dmesg.39 (text/plain), 16.46 KB, created by Mark Hittinger on 2007-08-11 20:43:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mark Hittinger

Created: 2007-08-11 20:43:46 UTC

Size: 16.46 KB

patch

obsolete

>Linux version 2.6.22.2-39.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Fri Aug 10 14:00:24 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f774000 (usable)
> BIOS-e820: 000000001f774000 - 000000001f776000 (ACPI NVS)
> BIOS-e820: 000000001f776000 - 000000001f797000 (ACPI data)
> BIOS-e820: 000000001f797000 - 000000001f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128884) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128884
>  HighMem    128884 ->   128884
>early_node_map[1] active PFN ranges
>    0:        0 ->   128884
>On node 0 totalpages: 128884
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 974 pages used for memmap
>  Normal zone: 123814 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEB80, 0014 (r0 DELL  )
>ACPI: RSDT 000FD22A, 0034 (r1 DELL    2400           7 ASL        61)
>ACPI: FACP 000FD25E, 0074 (r1 DELL    2400           7 ASL        61)
>ACPI: DSDT FFFCC0F1, 2404 (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 1F774000, 0040
>ACPI: SSDT FFFCE4F5, 00A7 (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD2D2, 006C (r1 DELL    2400           7 ASL        61)
>ACPI: BOOT 000FD33E, 0028 (r1 DELL    2400           7 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000)
>Built 1 zonelists.  Total pages: 127878
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07cb000 soft=c07ab000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2392.433 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 503636k/515536k available (2248k kernel code, 11348k reserved, 1201k data, 264k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf774000   ( 503 MB)
>      .init : 0xc0764000 - 0xc07a6000   ( 264 kB)
>      .data : 0xc06320b6 - 0xc075e584   (1201 kB)
>      .text : 0xc0400000 - 0xc06320b6   (2248 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4787.40 BogoMIPS (lpj=2393700)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 128K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
>Total of 1 processors activated (4787.40 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 15:30:54  Date: 07/11/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbbbf, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:00: iomem range 0x1000000-0x1f773fff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
>pnp: 00:0b: ioport range 0x800-0x85f has been reserved
>pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fe900000-feafffff
>  PREFETCH window: 20000000-200fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2275k freed
>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1186846253.644:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2304B430F51EFB89
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 830M Chipset.
>agpgart: Detected 892K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD800BB-75CAA0, ATA DISK drive
>hda: selected mode 0x45
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
>hdc: selected mode 0x42
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: Host Protected Area detected.
>	current capacity is 156250000 sectors (80000 MB)
>	native  capacity is 156301488 sectors (80026 MB)
>hda: Host Protected Area disabled.
>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:905:537
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 921k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1186846257.415:2): selinux=0 auid=4294967295
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>i810_smbus 0000:00:02.0: i810/i815 i2c device found.
>ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 20
>ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
>ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
>ssb: Switching to PCI core, index 2
>ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0
>b44.c:v2.0
>ssb: Switching to Fast Ethernet core, index 0
>ssb: Switching to PCI core, index 2
>ssb: Switching to Fast Ethernet core, index 0
>ssb: Switching to PCI core, index 2
>ssb: Switching to Fast Ethernet core, index 0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:12:3f:29:7a:2c
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50853 usecs
>intel8x0: clocking to 48000
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [VBTN]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2097144k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2097144k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4027 buckets, 32216 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Actions: View

Attachments on bug 251754: 161119 | 161120 | 161121 | 161122