Attachment 161142 Details for Bug 250902 – nerolog

nerolog

NeroLogAug07.txt (text/plain), 28.31 KB, created by David Florence on 2007-08-12 19:01:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Florence

Created: 2007-08-12 19:01:59 UTC

Size: 28.31 KB

patch

obsolete

>[dwflo@localhost ~]$ su -
>Password: 
>[root@localhost ~]# dmesg
>Linux version 2.6.22.1-41.fc7debug (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 17:29:47 EDT 2007
>Command line: ro root=LABEL=/1 rhgb debug
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F7910, 0014 (r0 K8T890)
>ACPI: RSDT 7FEE3040, 0034 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE30C0, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3180, 7932 (r1 K8T890 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: SSDT 7FEEABC0, 01CA (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: MCFG 7FEEAE00, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEEAB00, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fee0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524000
>On node 0 totalpages: 523903
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2361 pages reserved
>  DMA zone: 1550 pages, LIFO batch:0
>  DMA32 zone: 11169 pages used for memmap
>  DMA32 zone: 508735 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41864 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510285
>Kernel command line: ro root=LABEL=/1 rhgb debug
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2200.130 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Checking aperture...
>CPU 0: aperture @ fed0000000 size 128 MB
>Aperture beyond 4GB. Ignoring.
>AGP bridge at 00:00:00
>Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
>Memory: 2037664k/2096000k available (2413k kernel code, 57948k reserved, 1470k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4404.03 BogoMIPS (lpj=2202016)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12500759
>Detected 12.500 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4399.51 BogoMIPS (lpj=2199756)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Dual Core AMD Opteron(tm) Processor 175 stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=3936 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: No mmconfig possible on device 00:18
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: enabled onboard AC97/MC97 devices
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
>ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
>ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
>ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xd0000000
>ACPI: RTC can wake from S4
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x5000-0x500f has been reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0d: iomem range 0xcde00-0xcffff has been reserved
>pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>Time: acpi_pm clocksource has been installed.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 9000-9fff
>  MEM window: d8000000-daffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.2
>  IO window: a000-afff
>  MEM window: db000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 12, 16777216 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3088k freed
>audit: initializing netlink socket (disabled)
>audit(1186699645.609:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8321A2A758C22C88
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:02:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie02]
>Allocate Port Service[0000:00:02.0:pcie03]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>Allocate Port Service[0000:00:03.0:pcie02]
>Allocate Port Service[0000:00:03.0:pcie03]
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.1:pcie00]
>Allocate Port Service[0000:00:03.1:pcie01]
>Allocate Port Service[0000:00:03.1:pcie02]
>Allocate Port Service[0000:00:03.1:pcie03]
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.2:pcie00]
>Allocate Port Service[0000:00:03.2:pcie01]
>Allocate Port Service[0000:00:03.2:pcie02]
>Allocate Port Service[0000:00:03.2:pcie03]
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.3:pcie00]
>Allocate Port Service[0000:00:03.3:pcie01]
>Allocate Port Service[0000:00:03.3:pcie02]
>Allocate Port Service[0000:00:03.3:pcie03]
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:02.0:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:03.0:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:03.1:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:03.2:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:03.3:pcie01 failed with error 2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (44 C)
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 Dual Core AMD Opteron(tm) Processor 175 processors (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1088k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xdd005000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:0f.1: version 0.3.1
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001d000 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001d008 irq 15
>ata1.00: ATA-6: ST3160023A, 8.01, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.01: ATA-7: Maxtor 6L200P0, BAH41G10, max UDMA/133
>ata1.01: 398297088 sectors, multi 16: LBA48 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.01: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>ata2.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL0A, max UDMA/66
>ata2.00: limited to UDMA/33 due to 40-wire cable
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL0A PQ: 0 ANSI: 5
>sata_via 0000:00:0f.0: version 2.2
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 11
>scsi2 : sata_via
>scsi3 : sata_via
>ata3: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001bc02 bmdma 0x000000000001c800 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001c808 irq 20
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
>ata4.00: 488397168 sectors, multi 16: LBA48 
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2
>sd 3:0:0:0: [sdd] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1186699653.984:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1829 types, 81 bools, 1 sens, 1024 cats
>security:  61 classes, 69528 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1186699654.354:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:00:0b.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 36 (level, low) -> IRQ 36
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>PCI: Disallowing DAC for device 0000:05:00.0
>sky2 0000:05:00.0: v1.14 addr 0xdc000000 irq 36 Yukon-EC (0xb6) rev 2
>APIC error on CPU0: 00(08)
>APIC error on CPU1: 00(08)
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode.
>sky2 eth0: addr 00:17:31:7f:bc:65
>gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 811kHz
>gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xb400, speed 1174kHz
>firewire_core: created new fw device fw0 (0 config rom retries)
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
>Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>ACPI: PCI interrupt for device 0000:00:11.6 disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdd1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1020116k swap on /dev/sdd2.  Priority:-1 extents:1 across:1020116k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 48K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1186699685.630:4): audit_pid=2165 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts
>eth0: no IPv6 routers present
>usb 5-3: new high speed USB device using ehci_hcd and address 3
>usb 5-3: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     MAXTOR S TM3320620A       0000 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 27 00 00 00
>sd 4:0:0:0: [sde] Assuming drive cache: write through
>sd 4:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 27 00 00 00
>sd 4:0:0:0: [sde] Assuming drive cache: write through
> sde: sde1
>sd 4:0:0:0: [sde] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg5 type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sde1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sde1, type ext3), uses xattr
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>usb 5-3: USB disconnect, address 3
>[root@localhost ~]# 
>
>

Actions: View

Attachments on bug 250902: 160830 | 160864 | 160865 | 160866 | 160942 | 161142