Attachment 161259 Details for Bug 251779 – dmesg with +cpufreq=7 -quiet options present.

dmesg with +cpufreq=7 -quiet options present.

dmesg.tmp2 (text/plain), 36.63 KB, created by c.h. on 2007-08-14 10:43:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: c.h.

Created: 2007-08-14 10:43:12 UTC

Size: 36.63 KB

patch

obsolete

>Linux version 2.6.22.1-41.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 18:21:43 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb cpufreq.debug=7
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
> BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
> BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
> BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851840) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
>end_pfn_map = 2293760
>DMI 2.4 present.
>ACPI: RSDP 000FBB80, 0024 (r2 ACPIAM)
>ACPI: XSDT CFF80100, 0054 (r1 A_M_I_ OEMXSDT   6000726 MSFT       97)
>ACPI: FACP CFF80290, 00F4 (r3 A_M_I_ OEMFACP   6000726 MSFT       97)
>ACPI: DSDT CFF805C0, 8C47 (r1  A0761 A0761001        1 INTL 20060113)
>ACPI: FACS CFF8E000, 0040
>ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC   6000726 MSFT       97)
>ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG   6000726 MSFT       97)
>ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM   6000726 MSFT       97)
>ACPI: HPET CFF89210, 0038 (r1 A_M_I_ OEMHPET   6000726 MSFT       97)
>ACPI: OSFR CFF89250, 00B0 (r1 A_M_I_ OEMOSFR   6000726 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000230000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851840) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000230000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  2293760
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   851840
>    0:  1048576 ->  2293760
>On node 0 totalpages: 2096927
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1306 pages reserved
>  DMA zone: 2637 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833464 pages, LIFO batch:31
>  Normal zone: 17024 pages used for memmap
>  Normal zone: 1228160 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000cff80000 - 00000000cff8e000
>swsusp: Registered nosave memory region: 00000000cff8e000 - 00000000cffe0000
>swsusp: Registered nosave memory region: 00000000cffe0000 - 00000000d0000000
>swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fee00000
>swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
>swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffe00000
>swsusp: Registered nosave memory region: 00000000ffe00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 2064261
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb cpufreq.debug=7
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 2405.454 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x1047000 - 0x5047000
>Memory: 8197508k/9175040k available (2362k kernel code, 190200k reserved, 1401k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4813.49 BogoMIPS (lpj=2406749)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 16704544
>Detected 16.704 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.94 BogoMIPS (lpj=2405473)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x2
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4810.90 BogoMIPS (lpj=2405450)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4810.89 BogoMIPS (lpj=2405449)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>pnp: 00:06: ioport range 0x290-0x297 has been reserved
>pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
>pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: fc000000-fe8fffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: faf00000-faffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: c000-cfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: feb00000-febfffff
>  PREFETCH window: f0000000-f00fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 1048576 (order: 12, 25165824 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 1048576 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3821k freed
>audit: initializing netlink socket (disabled)
>audit(1187085167.734:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8321A2A758C22C88
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  7C, should be 7B [20070126]
>ACPI: SSDT CFF8E0D0, 0190 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT CFF8E260, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: SSDT CFF8E3B0, 0143 (r1    AMI   CPU3PM        1 INTL 20060113)
>ACPI: SSDT CFF8E500, 0143 (r1    AMI   CPU4PM        1 INTL 20060113)
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>usb 4-2: device descriptor read/all, error -71
>SCSI subsystem initialized
>libata version 2.21 loaded.
>PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0x000000000001dc00 ctl 0x000000000001d882 bmdma 0x000000000001d400 irq 17
>ata2: PATA max UDMA/100 cmd 0x000000000001d800 ctl 0x000000000001d482 bmdma 0x000000000001d408 irq 17
>ata1.00: ATA-6: WDC WD1200JB-00GVA0, 08.02D08, max UDMA/100
>ata1.00: 234441648 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JB-00G 08.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 8-3: new high speed USB device using ehci_hcd and address 3
>usb 8-3: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 4
>usb 4-2: configuration #1 chosen from 1 choice
>hub 4-2:1.0: USB hub found
>hub 4-2:1.0: 4 ports detected
>usb 4-2.2: new full speed USB device using uhci_hcd and address 5
>usb 4-2.2: configuration #1 chosen from 1 choice
>hub 4-2.2:1.0: USB hub found
>hub 4-2.2:1.0: 4 ports detected
>usb 4-2.3: new low speed USB device using uhci_hcd and address 6
>usb 4-2.3: configuration #1 chosen from 1 choice
>input: PATEN Creative Fatal1ty 1010 Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [PATEN Creative Fatal1ty 1010 Mouse] on usb-0000:00:1d.0-2.3
>usb 4-2.4: new full speed USB device using uhci_hcd and address 7
>usb 4-2.4: not running at top speed; connect to a high speed hub
>usb 4-2.4: configuration #1 chosen from 1 choice
>hub 4-2.4:1.0: USB hub found
>hub 4-2.4:1.0: 2 ports detected
>usb 4-2.2.1: new low speed USB device using uhci_hcd and address 8
>usb 4-2.2.1: configuration #1 chosen from 1 choice
>input: Microsoft Internet Keyboard Pro as /class/input/input3
>input: USB HID v1.10 Keyboard [Microsoft Internet Keyboard Pro] on usb-0000:00:1d.0-2.2.1
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0000000000019000 ctl 0x0000000000018c02 bmdma 0x0000000000018480 irq 22
>ata4: SATA max UDMA/133 cmd 0x0000000000018880 ctl 0x0000000000018802 bmdma 0x0000000000018488 irq 22
>input: Microsoft Internet Keyboard Pro as /class/input/input4
>input: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on usb-0000:00:1d.0-2.2.1
>usb 4-2.2.2: new low speed USB device using uhci_hcd and address 9
>ata3.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>usb 4-2.2.2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input5
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.0-2.2.2
>ata4.00: ATA-7: MAXTOR STM3500630AS, 3.AAE, max UDMA/133
>ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM350063 3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:<6>usb 4-2.4.1: new full speed USB device using uhci_hcd and address 10
> unknown partition table
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM350063 3.AA PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc:
>sd 3:0:0:0: [sdc] Attached SCSI disk
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0x000000000001a000 ctl 0x0000000000019c02 bmdma 0x0000000000019480 irq 22
>ata6: SATA max UDMA/133 cmd 0x0000000000019880 ctl 0x0000000000019802 bmdma 0x0000000000019488 irq 22
>usb 4-2.4.1: not running at top speed; connect to a high speed hub
>usb 4-2.4.1: configuration #1 chosen from 1 choice
>hub 4-2.4.1:1.0: USB hub found
>hub 4-2.4.1:1.0: 4 ports detected
>usb 4-2.4.2: new full speed USB device using uhci_hcd and address 11
>usb 4-2.4.2: not running at top speed; connect to a high speed hub
>usb 4-2.4.2: configuration #1 chosen from 1 choice
>ahci 0000:03:00.0: version 2.2
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 cmd 0xffffc20002754100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata8: SATA max UDMA/133 cmd 0xffffc20002754180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 11
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer Mini      0.2  PQ: 0 ANSI: 2
>sd 8:0:0:0: [sdd] 2001888 512-byte hardware sectors (1025 MB)
>sd 8:0:0:0: [sdd] Write Protect is off
>sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 8:0:0:0: [sdd] Assuming drive cache: write through
>sd 8:0:0:0: [sdd] 2001888 512-byte hardware sectors (1025 MB)
>usb-storage: device scan complete
>sd 8:0:0:0: [sdd] Write Protect is off
>sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 8:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 8:0:0:0: [sdd] Attached SCSI removable disk
>scsi 9:0:0:0: Direct-Access     SMSC     223 U HS-CF      3.60 PQ: 0 ANSI: 0
>scsi 9:0:0:1: Direct-Access     SMSC     223 U HS-MS      3.60 PQ: 0 ANSI: 0
>scsi 9:0:0:2: Direct-Access     SMSC     223 U HS-SM      3.60 PQ: 0 ANSI: 0
>scsi 9:0:0:3: Direct-Access     SMSC     223 U HS-SD/MMC  3.60 PQ: 0 ANSI: 0
>sd 9:0:0:0: [sde] Attached SCSI removable disk
>sd 9:0:0:1: [sdf] Attached SCSI removable disk
>sd 9:0:0:2: [sdg] Attached SCSI removable disk
>sd 9:0:0:3: [sdh] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-1: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 5001553
>ext3_orphan_cleanup: deleting unreferenced inode 4991650
>ext3_orphan_cleanup: deleting unreferenced inode 4986416
>ext3_orphan_cleanup: deleting unreferenced inode 4992353
>ext3_orphan_cleanup: deleting unreferenced inode 5010168
>ext3_orphan_cleanup: deleting unreferenced inode 4998932
>ext3_orphan_cleanup: deleting unreferenced inode 5008857
>ext3_orphan_cleanup: deleting unreferenced inode 4992403
>ext3_orphan_cleanup: deleting unreferenced inode 4986345
>ext3_orphan_cleanup: deleting unreferenced inode 22741028
>ext3_orphan_cleanup: deleting unreferenced inode 4991927
>ext3_orphan_cleanup: deleting unreferenced inode 5010161
>ext3_orphan_cleanup: deleting unreferenced inode 4984694
>ext3_orphan_cleanup: deleting unreferenced inode 5010157
>ext3_orphan_cleanup: deleting unreferenced inode 4985426
>ext3_orphan_cleanup: deleting unreferenced inode 5010159
>ext3_orphan_cleanup: deleting unreferenced inode 5010158
>ext3_orphan_cleanup: deleting unreferenced inode 5010189
>ext3_orphan_cleanup: deleting unreferenced inode 5010188
>ext3_orphan_cleanup: deleting unreferenced inode 5010187
>ext3_orphan_cleanup: deleting unreferenced inode 5010156
>ext3_orphan_cleanup: deleting unreferenced inode 22610022
>ext3_orphan_cleanup: deleting unreferenced inode 22610221
>ext3_orphan_cleanup: deleting unreferenced inode 22609963
>ext3_orphan_cleanup: deleting unreferenced inode 22610251
>ext3_orphan_cleanup: deleting unreferenced inode 22610240
>ext3_orphan_cleanup: deleting unreferenced inode 4984253
>ext3_orphan_cleanup: deleting unreferenced inode 5010177
>ext3_orphan_cleanup: deleting unreferenced inode 22609975
>ext3_orphan_cleanup: deleting unreferenced inode 22609959
>ext3_orphan_cleanup: deleting unreferenced inode 22609971
>ext3_orphan_cleanup: deleting unreferenced inode 22609941
>ext3_orphan_cleanup: deleting unreferenced inode 22609973
>ext3_orphan_cleanup: deleting unreferenced inode 22610020
>ext3_orphan_cleanup: deleting unreferenced inode 22610236
>ext3_orphan_cleanup: deleting unreferenced inode 22609935
>ext3_orphan_cleanup: deleting unreferenced inode 22610094
>ext3_orphan_cleanup: deleting unreferenced inode 22610266
>ext3_orphan_cleanup: deleting unreferenced inode 22610220
>ext3_orphan_cleanup: deleting unreferenced inode 4994175
>ext3_orphan_cleanup: deleting unreferenced inode 4994189
>ext3_orphan_cleanup: deleting unreferenced inode 22610227
>ext3_orphan_cleanup: deleting unreferenced inode 4994179
>ext3_orphan_cleanup: deleting unreferenced inode 4994191
>ext3_orphan_cleanup: deleting unreferenced inode 22609957
>ext3_orphan_cleanup: deleting unreferenced inode 22610226
>ext3_orphan_cleanup: deleting unreferenced inode 4994982
>ext3_orphan_cleanup: deleting unreferenced inode 22609925
>ext3_orphan_cleanup: deleting unreferenced inode 22610233
>ext3_orphan_cleanup: deleting unreferenced inode 22609969
>ext3_orphan_cleanup: deleting unreferenced inode 5010153
>ext3_orphan_cleanup: deleting unreferenced inode 22610229
>ext3_orphan_cleanup: deleting unreferenced inode 22609939
>ext3_orphan_cleanup: deleting unreferenced inode 22609937
>ext3_orphan_cleanup: deleting unreferenced inode 22609955
>ext3_orphan_cleanup: deleting unreferenced inode 22609931
>ext3_orphan_cleanup: deleting unreferenced inode 22610057
>EXT3-fs: dm-1: 57 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1187085191.830:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1829 types, 81 bools, 1 sens, 1024 cats
>security:  61 classes, 69524 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1187085191.993:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>sd 9:0:0:0: Attached scsi generic sg4 type 0
>sd 9:0:0:1: Attached scsi generic sg5 type 0
>sd 9:0:0:2: Attached scsi generic sg6 type 0
>sd 9:0:0:3: Attached scsi generic sg7 type 0
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.14 addr 0xxxxxxxxx irq 17 Yukon-EC Ultra (0xb4) rev 3
>sky2 eth0: addr xx:xx:xx:xx:xx:xx
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth1: RTL8169sc/8110sc at 0xffffc20002758c00, xx:xx:xx:xx:xx:xx, IRQ 16
>ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries)
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.11  Wed Jun 13 16:33:22 PDT 2007
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>floppy0: no floppy controllers found
>No dock devices found.
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>EXT3 FS on dm-1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>acpi-cpufreq: acpi_cpufreq_init
>acpi-cpufreq: acpi_cpufreq_early_init
>cpufreq-core: trying to register driver acpi-cpufreq
>cpufreq-core: adding CPU 0
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: No P-States
>cpufreq-core: initialization failed
>cpufreq-core: adding CPU 1
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: No P-States
>cpufreq-core: initialization failed
>cpufreq-core: adding CPU 2
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: No P-States
>cpufreq-core: initialization failed
>cpufreq-core: adding CPU 3
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: No P-States
>cpufreq-core: initialization failed
>cpufreq-core: no CPU initialized for driver acpi-cpufreq
>cpufreq-core: unregistering CPU 0
>cpufreq-core: unregistering CPU 1
>cpufreq-core: unregistering CPU 2
>cpufreq-core: unregistering CPU 3
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>audit(1187085213.846:4): audit_pid=2586 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
> CIFS VFS: Error connecting to IPv4 socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -113
>eth0: no IPv6 routers present
> CIFS VFS: Error connecting to IPv4 socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -113
> CIFS VFS: Error connecting to IPv4 socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -113
> CIFS VFS: Error connecting to IPv4 socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -113
> CIFS VFS: Error connecting to IPv4 socket. Aborting operation
> CIFS VFS: cifs_mount failed w/return code = -113
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>virbr0: no IPv6 routers present
>SELinux: initialized (dev sdd1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 251779: 161259