Attachment 161631 Details for Bug 252938 – dmesg result

dmesg result

dmesg.txt (text/plain), 22.59 KB, created by ZipanChen on 2007-08-16 07:31:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ZipanChen

Created: 2007-08-16 07:31:30 UTC

Size: 22.59 KB

patch

obsolete

>Linux version 2.6.23-0.105.rc3.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Tue Aug 14 12:11:06 EDT 2007
>Command line: ro root=LABEL=/12 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
> BIOS-e820: 0000000037e80000 - 0000000037e90000 (ACPI data)
> BIOS-e820: 0000000037e90000 - 0000000037f00000 (ACPI NVS)
> BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 228992) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F85C0, 0014 (r0 PTLTD )
>ACPI: RSDT 37E8A6CC, 0038 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 37E8FD48, 0074 (r1 ATI    Bowfin    6040000 ATI     F4240)
>ACPI: DSDT 37E8A704, 5644 (r1    ATI    SB600  6040000 MSFT  100000E)
>ACPI: FACS 37E90FC0, 0040
>ACPI: TCPA 37E8FDBC, 0032 (r2 AMD              6040000 PTEC        0)
>ACPI: SSDT 37E8FDEE, 0182 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: APIC 37E8FF70, 0054 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 37E8FFC4, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000037e80000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 228992) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000037e80000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   228992
>On node 0 totalpages: 228893
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2487 pages reserved
>  DMA zone: 1414 pages, LIFO batch:0
>  DMA32 zone: 5271 pages used for memmap
>  DMA32 zone: 219625 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
>swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 435848 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 221039
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/12 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1596.008 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 2160 bytes
>Checking aperture...
>CPU 0: aperture @ 980000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 880008k/915968k available (2473k kernel code, 35564k reserved, 1434k data, 708k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3194.69 BogoMIPS (lpj=1597347)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>Using local APIC timer interrupts.
>APIC timer calibration result 12468824
>Detected 12.468 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3191.85 BogoMIPS (lpj=1595928)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=4464 bytes
>khelper used greatest stack depth: 6600 bytes left
>khelper used greatest stack depth: 6352 bytes left
>Time:  7:02:15  Date: 07/16/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - e09fffff
>PCI: No mmconfig possible on device 00:18
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
>pnp: 00:08: ioport range 0x220-0x22f has been reserved
>pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:09: iomem range 0x0-0xfff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: c8000000-cfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: c0200000-c02fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: c0300000-c03fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 11, 9437184 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3048k freed
>khelper used greatest stack depth: 6280 bytes left
>khelper used greatest stack depth: 6240 bytes left
>audit: initializing netlink socket (disabled)
>audit(1187247733.796:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9BB3C31EC1E5DDA5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>Boot video device is 0000:01:05.0
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>Allocate Port Service[0000:00:05.0:pcie03]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>Allocate Port Service[0000:00:06.0:pcie02]
>Allocate Port Service[0000:00:06.0:pcie03]
>AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
>AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>cpuidle: driver acpi_idle failed to attach to cpu 1
>cpuidle: driver acpi_idle failed to attach to cpu 0
>ACPI: Thermal Zone [THRM] (55 C)
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>  Magic number: 3:914:15
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 708k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>insmod used greatest stack depth: 6144 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>insmod used greatest stack depth: 5296 bytes left
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 10 ports detected
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: can't set config #1, error -62
>usb 2-1: USB disconnect, address 2
>insmod used greatest stack depth: 5264 bytes left
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:12.0: version 2.3
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>usb 2-1: new low speed USB device using ohci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /class/input/input3
>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.1-1
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20001908100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata2: SATA max UDMA/133 cmd 0xffffc20001908180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata3: SATA max UDMA/133 cmd 0xffffc20001908200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata4: SATA max UDMA/133 cmd 0xffffc20001908280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101D, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>insmod used greatest stack depth: 3560 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1187247741.275:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000018420 irq 14
>ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000018428 irq 15
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE03, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
>sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20
>mmc0: SDHCI at 0xc0302000 irq 20 DMA
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
>b43-phy0: Broadcom 4311 WLAN found
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>b43-phy0 debug: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:ce:a1:6b
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>floppy0: no floppy controllers found
>No dock devices found.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1187247767.899:3): audit_pid=1708 old=0 by auid=4294967295
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>hda-intel: Invalid position buffer, using LPIB read method instead.
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)

Actions: View

Attachments on bug 252938: 161630 | 161631 | 161632