Attachment 161650 Details for Bug 252974 – dmesg from the events

dmesg from the events

dmesg.txt (text/plain), 120.71 KB, created by nicholas on 2007-08-16 12:56:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: nicholas

Created: 2007-08-16 12:56:42 UTC

Size: 120.71 KB

patch

obsolete

>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d2faf763.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[21] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d2faf941.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[24] = [00/610013].
>scsi(37): RSCN queue entry[25] = [00/610113].
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d2faff34.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[22] = [00/610513].
>scsi(38): RSCN queue entry[23] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d2fb0111.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[26] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d727f473.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[24] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d727f699.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[27] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d727fe68.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[28] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d727ffec.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[25] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7994a76.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[29] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7994bec.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[26] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7995245.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[30] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d79953bc.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[27] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d79abde7.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[31] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d79abf04.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[28] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d79ac586.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[0] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d79acafa.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[29] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7a006d5.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[30] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7a0096e.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[1] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7a00ea4.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[31] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7a0113e.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[2] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7abc2d6.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[0] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7abc559.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[3] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7abcac5.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[1] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7abcd28.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[4] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7ac4259.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[5] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7ac43a0.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[2] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7ac4a3b.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[6] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7ac4b71.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[3] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7ad28ef.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[7] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7ad2a18.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[4] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7ad30cb.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[8] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7ad31e9.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[5] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7f8c869.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[9] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7f8c989.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[6] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1d7f8d044.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[10] = [00/610013].
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1d7f8d159.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[7] = [00/610413].
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dc30b666.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[11] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dc30b770.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[8] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dc30be52.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[12] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dc30bf41.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[9] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc1daf5.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[13] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc1dbd4.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[10] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc23913.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[14] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc23a00.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[11] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc2a274.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[15] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc2a378.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[12] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc36607.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[16] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc36734.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[13] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc3cf9d.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[17] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc3d0ac.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[14] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc49330.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[18] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc49468.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[15] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc4fa36.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[16] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc4fccd.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[19] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>scsi(38): fcport-1 - port retry count: 1 remaining
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc5bcc8.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[20] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc5bd7e.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[17] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc6262a.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[21] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc6270b.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[18] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc6e709.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[19] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc6e9b0.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[22] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc75329.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[23] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc7542b.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[20] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc8143d.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[21] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc81671.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[24] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc88028.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[25] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc88183.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[22] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc94195.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[23] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc943ad.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[26] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcc9ad64.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[27] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcc9aeb7.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[24] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcca70eb.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[28] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dcca7276.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[25] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1dcca9413.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[29] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): fcport-1 - port retry count: 1 remaining
>scsi(37): fcport-1 - port retry count: 0 remaining
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1dccadc2d.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[26] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(38): fcport-1 - port retry count: 1 remaining
>scsi(38): fcport-1 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1f4047a35.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[30] = [00/610013].
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(37): fcport-0 - port retry count: 1 remaining
>scsi(37): fcport-0 - port retry count: 0 remaining
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1f404a709.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[27] = [00/610413].
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(38): fcport-0 - port retry count: 1 remaining
>scsi(38): fcport-0 - port retry count: 0 remaining
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0013.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1f4793d5a.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[31] = [00/610013].
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0413.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1f47981a1.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[28] = [00/610413].
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(38): Asynchronous RSCR UPDATE.
>scsi(38): RSCN database changed -- 0061 0513.
>scsi(38): qla2x00_loop_resync()
>scsi(38): F/W Ready - OK 
>scsi(38): fw_state=3 curr time=1f479db7a.
>scsi(38): Configure loop -- dpc flags =0x40000a0
>scsi(38): RSCN queue entry[29] = [00/610513].
>scsi(38): Assigning target ID=00 @ 00000101028f8000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(38): Assigning target ID=01 @ 00000101fc2db000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(38): LOOP READY
>qla2x00_restart_queues(38): callback 0 commands.
>qla2x00_restart_queues(38): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(38): qla2x00_loop_resync - end
>scsi(37): Asynchronous RSCR UPDATE.
>scsi(37): RSCN database changed -- 0061 0113.
>scsi(37): qla2x00_loop_resync()
>scsi(37): F/W Ready - OK 
>scsi(37): fw_state=3 curr time=1f47a0c61.
>scsi(37): Configure loop -- dpc flags =0x40000a0
>scsi(37): RSCN queue entry[0] = [00/610113].
>scsi(37): Assigning target ID=00 @ 00000101fc2ca000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(37): Assigning target ID=01 @ 0000010100fb2000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(37): LOOP READY
>qla2x00_restart_queues(37): callback 0 commands.
>qla2x00_restart_queues(37): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(37): qla2x00_loop_resync - end
>Synchronizing SCSI cache for disk sdb: 
>scsi(37:0:0): status_entry: Port Down pid=2973084, compl status=0x29, port state=0x4
>scsi(37): Port login retry: 201400a0b82625ae, id = 0x0081 retry cnt=8
>scsi(37): DPC checking retry_q. total=1
>scsi(37): done processing retry queue - dead=0, online=1
> scsi(37): qla2x00_port_login()
>scsi(37): qla2x00_port_login - end
>scsi(37:0:0) qla2x00_done: did_error = 2, comp-scsi= 0x29-0x0 pid=2973084.
>scsi(37): Suspend lun for 6 secs, count=0, max count=10, state=3
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 0
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 0
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 0
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 0
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 0
>scsi(37): DPC checking scsi retry_q.total=1
>scsi(37): dpc() found scsi reqs to restart= 1
>scsi(37): DPC checking retry_q. total=1
>scsi(37): done processing retry queue - dead=0, online=1
> scsi(37:0:0) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x302 pid=2973107.
>Synchronizing SCSI cache for disk sdc: 
>Synchronizing SCSI cache for disk sdd: 
>scsi(37:1:0): status_entry: Port Down pid=2973183, compl status=0x29, port state=0x4
>scsi(37): Port login retry: 201500a0b82625ae, id = 0x0082 retry cnt=8
>scsi(37): DPC checking retry_q. total=1
>scsi(37): done processing retry queue - dead=0, online=1
> scsi(37): qla2x00_port_login()
>scsi(37): qla2x00_port_login - end
>scsi(37:1:0) qla2x00_done: did_error = 2, comp-scsi= 0x29-0x0 pid=2973183.
>Synchronizing SCSI cache for disk sde: 
>scsi(37): DPC handler exiting
>Synchronizing SCSI cache for disk sdf: 
>scsi(38:0:0): status_entry: Port Down pid=2973224, compl status=0x29, port state=0x4
>scsi(38): Port login retry: 203400a0b82625ae, id = 0x0081 retry cnt=8
>scsi(38): DPC checking retry_q. total=1
>scsi(38): done processing retry queue - dead=0, online=1
> scsi(38): qla2x00_port_login()
>scsi(38): qla2x00_port_login - end
>scsi(38:0:0) qla2x00_done: did_error = 2, comp-scsi= 0x29-0x0 pid=2973224.
>Synchronizing SCSI cache for disk sdg: 
>Synchronizing SCSI cache for disk sdh: 
>scsi(38:1:0): status_entry: Port Down pid=2973250, compl status=0x29, port state=0x4
>scsi(38): Port login retry: 203500a0b82625ae, id = 0x0082 retry cnt=8
>scsi(38): DPC checking retry_q. total=1
>scsi(38): done processing retry queue - dead=0, online=1
> scsi(38): qla2x00_port_login()
>scsi(38): qla2x00_port_login - end
>scsi(38:1:0) qla2x00_done: did_error = 2, comp-scsi= 0x29-0x0 pid=2973250.
>Synchronizing SCSI cache for disk sdi: 
>scsi(38): Suspend lun for 6 secs, count=0, max count=10, state=3
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 0
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 0
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 0
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 0
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 0
>scsi(38): DPC checking scsi retry_q.total=1
>scsi(38): dpc() found scsi reqs to restart= 1
>scsi(38): DPC checking retry_q. total=1
>scsi(38): done processing retry queue - dead=0, online=1
> scsi(38:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x302 pid=2973278.
>scsi(38): DPC handler exiting
>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 37 (level, low) -> IRQ 225
>qla2300 0000:06:01.0: Found an ISP2312, irq 225, iobase 0xffffff000003e000
>qla2300 0000:06:01.0: Configuring PCI space...
>qla2300 0000:06:01.0: Configure NVRAM parameters...
>qla2300 0000:06:01.0: Verifying loaded RISC code...
>scsi(39): **** Load RISC code ****
>scsi(39): Verifying Checksum of loaded RISC code.
>scsi(39): Checksum OK, start firmware.
>scsi(39): Issue init firmware.
>qla2300 0000:06:01.0: Waiting for LIP to complete...
>scsi(39): Asynchronous LIP RESET (f700).
>qla2300 0000:06:01.0: LIP reset occured (f700).
>scsi(39): LIP occured (f700).
>qla2300 0000:06:01.0: LIP occured (f700).
>scsi(39): F/W Ready - OK 
>scsi(39): Asynchronous P2P MODE received.
>scsi(39): Asynchronous LOOP UP (2 Gbps).
>qla2300 0000:06:01.0: LOOP UP detected (2 Gbps).
>scsi(39): Asynchronous PORT UPDATE.
>scsi(39): Port database changed ffff 0006 00c8.
>scsi(39): fw_state=3 curr time=1f4801c25.
>qla2300 0000:06:01.0: Topology - (F_Port), Host Loop address 0xffff
>scsi(39): Configure loop -- dpc flags =0x4080040
>scsi(39): RSCN queue entry[0] = [00/000000].
>scsi(39): device_resync: rscn overflow.
>scsi(39): RFT_ID exiting normally.
>scsi(39): RFF_ID failed, rejected request:
> 0   1   2   3   4   5   6   7   8   9  Ah  Bh  Ch  Dh  Eh  Fh
>--------------------------------------------------------------
>01  00  00  00  fc  02  00  00  80  01  00  00  00  0b  00  00
>scsi(39): Register FC-4 Features failed.
>scsi(39): RNN_ID exiting normally.
>scsi(39): RSNN_NN exiting normally.
>scsi(39): GID_PT entry - nn 200400a0b82625ae pn 201400a0b82625ae portid=610013.
>scsi(39): GID_PT entry - nn 200400a0b82625ae pn 201500a0b82625ae portid=610113.
>scsi(39): GID_PT entry - nn 200000e08b8645b4 pn 210000e08b8645b4 portid=610613.
>scsi(39): device wrap (610613)
>scsi(39): Trying Fabric Login w/loop id 0x0081 for port 610013.
>scsi(39): Trying Fabric Login w/loop id 0x0082 for port 610113.
>scsi(39): Alloc Target 0 @ 000001008b129000
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Alloc Lun 0 @ tgt 0.
>scsi(39): Alloc Lun 1 @ tgt 0.
>scsi(39): Alloc Target 1 @ 00000101028f8000
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): Alloc Lun 0 @ tgt 1.
>scsi(39): Alloc Lun 1 @ tgt 1.
>scsi(39): LOOP READY
>DEBUG: detect hba 39 at address = 000001008bf203c8
>qla2xxx: lock=ffffffffa0267dd0 listhead=ffffffffa0267de0, done adding ha list=000001008bf203c8.
>qla2300 0000:06:01.0: scsi-qla38-adapter-node=200000e08b8645b4\;
>qla2300 0000:06:01.0: scsi-qla38-adapter-port=210000e08b8645b4\;
>qla2300 0000:06:01.0: scsi-qla38-tgt-0-di-0-port=201400a0b82625ae\;
>qla2300 0000:06:01.0: scsi-qla38-tgt-1-di-0-port=201500a0b82625ae\;
>scsi39 : qla2xxx
>qla2300 0000:06:01.0: 
> QLogic Fibre Channel HBA Driver: 8.01.04-d8-debug
>  QLogic QLA2342 - Sun 133MHz PCI-X to 2Gb FC, Dual Channel
>  ISP2312: PCI-X (133 MHz) @ 0000:06:01.0 hdma+, host#=39, fw=3.03.20 IPX
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.0: scsi(39:0:0:0): Enabled tagged queuing, queue depth 32.
>SCSI device sdj: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdj: drive cache: write back
>SCSI device sdj: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdj: drive cache: write back
> sdj: unknown partition table
>Attached scsi disk sdj at scsi39, channel 0, id 0, lun 0
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.0: scsi(39:0:0:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdk: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdk: drive cache: write back
>SCSI device sdk: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdk: drive cache: write back
> sdk: unknown partition table
>Attached scsi disk sdk at scsi39, channel 0, id 0, lun 1
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.0: scsi(39:0:1:0): Enabled tagged queuing, queue depth 32.
>SCSI device sdl: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdl: drive cache: write back
>SCSI device sdl: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdl: drive cache: write back
> sdl: unknown partition table
>Attached scsi disk sdl at scsi39, channel 0, id 1, lun 0
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.0: scsi(39:0:1:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdm: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdm: drive cache: write back
>SCSI device sdm: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdm: drive cache: write back
> sdm: unknown partition table
>Attached scsi disk sdm at scsi39, channel 0, id 1, lun 1
>ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 38 (level, low) -> IRQ 233
>qla2300 0000:06:01.1: Found an ISP2312, irq 233, iobase 0xffffff0000062000
>qla2300 0000:06:01.1: Configuring PCI space...
>qla2300 0000:06:01.1: Configure NVRAM parameters...
>qla2300 0000:06:01.1: Verifying loaded RISC code...
>scsi(40): **** Load RISC code ****
>scsi(40): Verifying Checksum of loaded RISC code.
>scsi(40): Checksum OK, start firmware.
>scsi(40): Issue init firmware.
>qla2300 0000:06:01.1: Waiting for LIP to complete...
>scsi(40): Asynchronous LIP RESET (f700).
>qla2300 0000:06:01.1: LIP reset occured (f700).
>scsi(40): LIP occured (f700).
>qla2300 0000:06:01.1: LIP occured (f700).
>scsi(40): Asynchronous P2P MODE received.
>scsi(40): Asynchronous LOOP UP (2 Gbps).
>qla2300 0000:06:01.1: LOOP UP detected (2 Gbps).
>scsi(40): Asynchronous PORT UPDATE.
>scsi(40): Port database changed ffff 0006 0000.
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1f480adc3.
>qla2300 0000:06:01.1: Topology - (F_Port), Host Loop address 0xffff
>scsi(40): Configure loop -- dpc flags =0x4080040
>scsi(40): RSCN queue entry[0] = [00/000000].
>scsi(40): device_resync: rscn overflow.
>scsi(40): RFT_ID exiting normally.
>scsi(40): RFF_ID failed, rejected request:
> 0   1   2   3   4   5   6   7   8   9  Ah  Bh  Ch  Dh  Eh  Fh
>--------------------------------------------------------------
>01  00  00  00  fc  02  00  00  80  01  00  00  00  0b  00  00
>scsi(40): Register FC-4 Features failed.
>scsi(40): RNN_ID exiting normally.
>scsi(40): RSNN_NN exiting normally.
>scsi(40): GID_PT entry - nn 200400a0b82625ae pn 203400a0b82625ae portid=610413.
>scsi(40): GID_PT entry - nn 200400a0b82625ae pn 203500a0b82625ae portid=610513.
>scsi(40): GID_PT entry - nn 200100e08ba645b4 pn 210100e08ba645b4 portid=611413.
>scsi(40): device wrap (611413)
>scsi(40): Trying Fabric Login w/loop id 0x0081 for port 610413.
>scsi(40): Trying Fabric Login w/loop id 0x0082 for port 610513.
>scsi(40): Alloc Target 0 @ 00000101d840c000
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(40): Alloc Lun 0 @ tgt 0.
>scsi(40): Alloc Lun 1 @ tgt 0.
>scsi(40): Alloc Target 1 @ 00000101d85b1000
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): Alloc Lun 0 @ tgt 1.
>scsi(40): Alloc Lun 1 @ tgt 1.
>scsi(40): LOOP READY
>DEBUG: detect hba 40 at address = 00000101d7cd83c8
>qla2xxx: lock=ffffffffa0267dd0 listhead=ffffffffa0267de0, done adding ha list=00000101d7cd83c8.
>qla2300 0000:06:01.1: scsi-qla39-adapter-node=200100e08ba645b4\;
>qla2300 0000:06:01.1: scsi-qla39-adapter-port=210100e08ba645b4\;
>qla2300 0000:06:01.1: scsi-qla39-tgt-0-di-0-port=203400a0b82625ae\;
>qla2300 0000:06:01.1: scsi-qla39-tgt-1-di-0-port=203500a0b82625ae\;
>scsi40 : qla2xxx
>qla2300 0000:06:01.1: 
> QLogic Fibre Channel HBA Driver: 8.01.04-d8-debug
>  QLogic QLA2342 - Sun 133MHz PCI-X to 2Gb FC, Dual Channel
>  ISP2312: PCI-X (133 MHz) @ 0000:06:01.1 hdma+, host#=40, fw=3.03.20 IPX
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.1: scsi(40:0:0:0): Enabled tagged queuing, queue depth 32.
>SCSI device sdn: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdn: drive cache: write back
>SCSI device sdn: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdn: drive cache: write back
> sdn: unknown partition table
>Attached scsi disk sdn at scsi40, channel 0, id 0, lun 0
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.1: scsi(40:0:0:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdo: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdo: drive cache: write back
>SCSI device sdo: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdo: drive cache: write back
> sdo: unknown partition table
>Attached scsi disk sdo at scsi40, channel 0, id 0, lun 1
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.1: scsi(40:0:1:0): Enabled tagged queuing, queue depth 32.
>SCSI device sdp: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdp: drive cache: write back
>SCSI device sdp: 419840 512-byte hdwr sectors (215 MB)
>SCSI device sdp: drive cache: write back
> sdp: unknown partition table
>Attached scsi disk sdp at scsi40, channel 0, id 1, lun 0
>  Vendor: SUN       Model: CSM200_R          Rev: 0619
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:06:01.1: scsi(40:0:1:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdq: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdq: drive cache: write back
>SCSI device sdq: 209715200 512-byte hdwr sectors (107374 MB)
>SCSI device sdq: drive cache: write back
> sdq: unknown partition table
>Attached scsi disk sdq at scsi40, channel 0, id 1, lun 1
>device-mapper: dm-multipath: error getting device
>device-mapper: error adding target to table
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): fw_state=3 curr time=1fae7e7e5.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fae7e7ea.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[0] = [00/610413].
>scsi(40): RSCN queue entry[1] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[0] = [00/610013].
>scsi(39): RSCN queue entry[1] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fae7efba.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[2] = [00/610413].
>scsi(40): RSCN queue entry[3] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): fw_state=3 curr time=1fae7f193.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[2] = [00/610013].
>scsi(39): RSCN queue entry[3] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=1fc70e19a.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fc70e1dc.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[4] = [00/610413].
>scsi(40): RSCN queue entry[5] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): RSCN queue entry[4] = [00/610013].
>scsi(39): RSCN queue entry[5] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=1fc70e977.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fc70e9ac.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[6] = [00/610413].
>scsi(40): RSCN queue entry[7] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): RSCN queue entry[6] = [00/610013].
>scsi(39): RSCN queue entry[7] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): fcport-0 - port retry count: 1 remaining
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fc7accee.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[8] = [00/610513].
>scsi(40): RSCN queue entry[9] = [00/610413].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): fw_state=3 curr time=1fc7acebd.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[8] = [00/610113].
>scsi(39): RSCN queue entry[9] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): qla2x00_loop_resync()
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=1fc7ad4be.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[10] = [00/610513].
>scsi(40): RSCN queue entry[11] = [00/610413].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=1fc7ad6b3.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[10] = [00/610113].
>scsi(39): RSCN queue entry[11] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): fcport-0 - port retry count: 0 remaining
>scsi(39): qla2x00_loop_resync - end
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>TCP: Treason uncloaked! Peer 213.249.147.149:25/39512 shrinks window 3848254904:3848255801. Repaired.
>TCP: Treason uncloaked! Peer 213.249.147.149:25/39512 shrinks window 3848254904:3848255801. Repaired.
>slapd[5320] general protection rip:2a95f6c2ff rsp:7fbffff570 error:0
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c51006.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[12] = [00/610013].
>scsi(39): RSCN queue entry[13] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=0
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c510c9.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[12] = [00/610413].
>scsi(40): RSCN queue entry[13] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c517e8.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[14] = [00/610013].
>scsi(39): RSCN queue entry[15] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=0
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c518ab.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[14] = [00/610413].
>scsi(40): RSCN queue entry[15] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c60e13.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[16] = [00/610013].
>scsi(39): RSCN queue entry[17] = [00/610113].
>scsi(40): DPC checking retry_q. total=32
>scsi(40): done processing retry queue - dead=0, online=32
> scsi(40): qla2x00_loop_resync()
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201392.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201393.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201394.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201395.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201396.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201397.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201398.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201399.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201400.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201401.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201402.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201403.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201404.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201405.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201406.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201407.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201408.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201409.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201410.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201411.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201412.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201413.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201414.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201415.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201416.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201417.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201418.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201419.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201420.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201421.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201422.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201423.
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 33040
>device-mapper: dm-multipath: Failing path 8:224.
>end_request: I/O error, dev sdo, sector 33048
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26477648
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26477696
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26477840
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26477880
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26478024
>end_request: I/O error, dev sdo, sector 26478032
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26529464
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 26529912
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 28049408
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 28049736
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 28312896
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 39847064
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 44564480
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 44564488
>end_request: I/O error, dev sdo, sector 44564496
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 44810336
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 63438848
>end_request: I/O error, dev sdo, sector 63438856
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 63635552
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 91751408
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 117964816
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 126626168
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 199500224
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 200286336
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 201598088
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 202646408
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 202908688
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 203432320
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 203432680
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 203433408
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 203433992
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 203957712
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 205005896
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 206316600
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c60ed6.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[16] = [00/610413].
>scsi(40): RSCN queue entry[17] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 5 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=5, scsi retry=0 commands.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201435.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201436.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201437.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201438.
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201439.
>scsi(40): qla2x00_loop_resync - end
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 207365648
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 207366416
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 209200576
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 209200976
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 209201896
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c616d3.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[18] = [00/610413].
>scsi(40): RSCN queue entry[19] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): RSCN queue entry[18] = [00/610013].
>scsi(39): RSCN queue entry[19] = [00/610113].
>qla2x00_configure_loop(39): *** FAILED ***
>scsi(39): Configure loop -- dpc flags =0x40040a0
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=0
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 32 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=32, scsi retry=0 commands.
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201440.
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201441.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 33040
>device-mapper: dm-multipath: Failing path 8:160.
>end_request: I/O error, dev sdk, sector 33048
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201442.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26477648
>warning: many lost ticks.
>Your time source seems to be instable or some driver is hogging interupts
>rip __do_softirq+0x4d/0xd0
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201443.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26477696
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201444.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26477840
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201445.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26477880
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201446.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26478024
>end_request: I/O error, dev sdk, sector 26478032
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201447.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26529464
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201448.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 26529912
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201449.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 28049408
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201450.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 28049736
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201451.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 28312896
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201452.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 39847064
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201453.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 44564480
>end_request: I/O error, dev sdk, sector 44564488
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201454.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 44810336
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201455.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 63438848
>end_request: I/O error, dev sdk, sector 63438856
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201456.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 63635552
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201457.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 91751408
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201458.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 117964816
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201459.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 126626168
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201460.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 199500224
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201461.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 200286336
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201462.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 201598088
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201463.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 202646408
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201464.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 202908688
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201465.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 203432320
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201466.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 203432680
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201467.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 203433408
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201469.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 203433992
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c646d5.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[20] = [00/610413].
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201470.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 203957712
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201471.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 205005896
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201472.
>scsi(40): qla2x00_loop_resync()
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 206316600
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c64aea.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[21] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 207365648
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c64f10.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[22] = [00/610413].
>scsi(40): RSCN queue entry[23] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): DPC checking retry_q. total=18
>scsi(39): done processing retry queue - dead=0, online=18
> scsi(39): qla2x00_loop_resync()
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201703.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201704.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201705.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201706.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201707.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201708.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201709.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201710.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201711.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201712.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201713.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201714.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201715.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201716.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201717.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201718.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201719.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201720.
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 33040
>device-mapper: dm-multipath: Failing path 8:192.
>end_request: I/O error, dev sdm, sector 33048
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26477648
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26477696
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26477840
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26477880
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26478024
>end_request: I/O error, dev sdm, sector 26478032
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26529464
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 26529912
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 28049408
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 28049736
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 28312896
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 39847064
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 44564480
>end_request: I/O error, dev sdm, sector 44564488
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 44810336
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 63438848
>end_request: I/O error, dev sdm, sector 63438856
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 63635552
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 91751408
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 117964816
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c650fb.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[20] = [00/610013].
>scsi(39): RSCN queue entry[21] = [00/610113].
>scsi(39): RSCN queue entry[22] = [00/610013].
>scsi(39): RSCN queue entry[23] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 14 commands.
>qla2x00_restart_queues(39): active=14, retry=0, pending=0, done=14, scsi retry=0 commands.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201760.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201761.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201762.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201763.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201764.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201765.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201766.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201767.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201768.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201769.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201770.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201771.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201772.
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15201773.
>scsi(39): qla2x00_loop_resync - end
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 126626168
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 199500224
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 200286336
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 201598088
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 202646408
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 202908688
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 203432320
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 203432680
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 203433408
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 203433992
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 203957712
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 205005896
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 206316600
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 207365648
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c76ab5.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[24] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c76c4e.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[24] = [00/610413].
>scsi(40): RSCN queue entry[25] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): RSCN queue entry[25] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c772e5.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[26] = [00/610013].
>scsi(39): RSCN queue entry[27] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c77451.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[26] = [00/610413].
>scsi(40): RSCN queue entry[27] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c7b54d.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[28] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c7b6bb.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[28] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c7bae1.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[29] = [00/610413].
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): LOOP READY
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[30] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=2
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c7bcfd.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[29] = [00/610013].
>scsi(39): RSCN queue entry[30] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239c7c2e9.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[31] = [00/610413].
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c7c50c.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[31] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): fcport-0 - port retry count: 1 remaining
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c8e61c.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[0] = [00/610013].
>scsi(39): RSCN queue entry[1] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): DPC checking retry_q. total=32
>scsi(40): done processing retry queue - dead=0, online=32
> scsi(40): qla2x00_loop_resync()
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204329.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204330.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204332.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204333.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204334.
>scsi(39): fcport-0 - port retry count: 1 remaining
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204335.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204336.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204337.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204338.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204339.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204340.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204341.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204342.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204343.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204344.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204345.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239c8edae.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[2] = [00/610013].
>scsi(39): RSCN queue entry[3] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204346.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204347.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204348.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204349.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204350.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204351.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204352.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204353.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204354.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204355.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204356.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204357.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204358.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204359.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204360.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=15204361.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): F/W Ready - OK 
>scsi(40): RSCN database changed -- 0061 0513.
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28570808
>device-mapper: dm-multipath: Failing path 65:0.
>end_request: I/O error, dev sdq, sector 28570816
>scsi(40): fw_state=3 curr time=239c8f591.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[0] = [00/610413].
>scsi(40): RSCN queue entry[1] = [00/610513].
>scsi(40): RSCN queue entry[2] = [00/610413].
>scsi(40): RSCN queue entry[3] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28570928
>end_request: I/O error, dev sdq, sector 28570936
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28571856
>end_request: I/O error, dev sdq, sector 28571864
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28572152
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28572160
>end_request: I/O error, dev sdq, sector 28572168
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28572656
>end_request: I/O error, dev sdq, sector 28572664
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28573056
>end_request: I/O error, dev sdq, sector 28573064
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28573224
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28573232
>end_request: I/O error, dev sdq, sector 28573240
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28585872
>end_request: I/O error, dev sdq, sector 28585880
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28607680
>end_request: I/O error, dev sdq, sector 28607688
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28607944
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28607952
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608000
>end_request: I/O error, dev sdq, sector 28608008
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608288
>end_request: I/O error, dev sdq, sector 28608296
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608456
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608464
>end_request: I/O error, dev sdq, sector 28608472
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608576
>end_request: I/O error, dev sdq, sector 28608584
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608720
>end_request: I/O error, dev sdq, sector 28608728
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608872
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28608880
>end_request: I/O error, dev sdq, sector 28608888
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609248
>end_request: I/O error, dev sdq, sector 28609256
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609296
>end_request: I/O error, dev sdq, sector 28609304
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609640
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609648
>end_request: I/O error, dev sdq, sector 28609656
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609744
>end_request: I/O error, dev sdq, sector 28609752
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609776
>end_request: I/O error, dev sdq, sector 28609784
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609888
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28609896
>end_request: I/O error, dev sdq, sector 28609904
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28610112
>end_request: I/O error, dev sdq, sector 28610120
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28610848
>end_request: I/O error, dev sdq, sector 28610856
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 28612328
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239ca322a.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[4] = [00/610013].
>scsi(39): RSCN queue entry[5] = [00/610113].
>scsi(39): Assigning target ID=00 @ 000001008b129000 to loop id=0x0081, port state=0x4, port down retry=1
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239ca33df.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[4] = [00/610413].
>scsi(40): RSCN queue entry[5] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=239ca39f3.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[6] = [00/610013].
>scsi(39): RSCN queue entry[7] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=239ca3bee.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[6] = [00/610413].
>scsi(40): RSCN queue entry[7] = [00/610513].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): fcport-0 - port retry count: 0 remaining
>scsi(40): fcport-0 - port retry count: 1 remaining
>device-mapper: dm-multipath: error getting device
>device-mapper: error adding target to table
>multipath[8762]: segfault at 000000000062d9b8 rip 00000000004043e7 rsp 0000007fbffff880 error 4
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): qla2x00_loop_resync()
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=26856752b.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[8] = [00/610113].
>scsi(39): RSCN queue entry[9] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=2685677e3.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[8] = [00/610513].
>scsi(40): RSCN queue entry[9] = [00/610413].
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=268567d38.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[10] = [00/610113].
>scsi(39): RSCN queue entry[11] = [00/610013].
>scsi(39): Assigning target ID=01 @ 00000101028f8000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 1 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=1, scsi retry=0 commands.
>scsi(39:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=25858942.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=268567f74.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[10] = [00/610513].
>scsi(40): RSCN queue entry[11] = [00/610413].
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>SCSI error : <39 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdk, sector 206258856
>device-mapper: dm-multipath: Failing path 8:160.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): DPC checking retry_q. total=1
>scsi(40): done processing retry queue - dead=0, online=1
> scsi(40): qla2x00_loop_resync()
>scsi(40:0:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=26838110.
>SCSI error : <40 0 0 1> return code = 0x20000
>end_request: I/O error, dev sdo, sector 131512000
>device-mapper: dm-multipath: Failing path 8:224.
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=26d623229.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(39): qla2x00_loop_resync()
>scsi(39): F/W Ready - OK 
>scsi(39): fw_state=3 curr time=26d623272.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[12] = [00/610013].
>scsi(39): RSCN queue entry[13] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): RSCN queue entry[12] = [00/610413].
>scsi(40): RSCN queue entry[13] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=1
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 1 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=1, scsi retry=0 commands.
>scsi(40:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=26838150.
>scsi(40): qla2x00_loop_resync - end
>SCSI error : <40 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdq, sector 131512000
>device-mapper: dm-multipath: Failing path 65:0.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0013.
>scsi(39): Asynchronous RSCR UPDATE.
>scsi(39): RSCN database changed -- 0061 0113.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0413.
>scsi(40): Asynchronous RSCR UPDATE.
>scsi(40): RSCN database changed -- 0061 0513.
>scsi(40): DPC checking retry_q. total=0
>scsi(40): done processing retry queue - dead=0, online=0
> scsi(40): qla2x00_loop_resync()
>scsi(40): F/W Ready - OK 
>scsi(40): fw_state=3 curr time=26d623910.
>scsi(40): Configure loop -- dpc flags =0x40000a0
>scsi(40): RSCN queue entry[14] = [00/610413].
>scsi(40): RSCN queue entry[15] = [00/610513].
>scsi(40): Assigning target ID=00 @ 00000101d840c000 to loop id=0x0081, port state=0x4, port down retry=1
>scsi(40): Assigning target ID=01 @ 00000101d85b1000 to loop id=0x0082, port state=0x4, port down retry=2
>scsi(39): DPC checking retry_q. total=1
>scsi(39): done processing retry queue - dead=0, online=1
> scsi(39): qla2x00_loop_resync()
>scsi(39:1:1) qla2x00_done: did_error = 2, comp-scsi= 0x0-0x0 pid=26838209.
>scsi(39): F/W Ready - OK 
>SCSI error : <39 0 1 1> return code = 0x20000
>end_request: I/O error, dev sdm, sector 131512000
>device-mapper: dm-multipath: Failing path 8:192.
>scsi(39): fw_state=3 curr time=26d623a42.
>scsi(39): Configure loop -- dpc flags =0x40000a0
>scsi(39): RSCN queue entry[14] = [00/610013].
>scsi(39): RSCN queue entry[15] = [00/610113].
>scsi(39): LOOP READY
>qla2x00_restart_queues(39): callback 0 commands.
>qla2x00_restart_queues(39): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(39): qla2x00_loop_resync - end
>scsi(40): LOOP READY
>qla2x00_restart_queues(40): callback 0 commands.
>qla2x00_restart_queues(40): active=0, retry=0, pending=0, done=0, scsi retry=0 commands.
>scsi(40): qla2x00_loop_resync - end
>device-mapper: dm-multipath: error getting device
>device-mapper: error adding target to table
>multipath[10733]: segfault at 000000000062d9b8 rip 00000000004043e7 rsp 0000007fbffff880 error 4
>device-mapper: dm-multipath: error getting device
>device-mapper: error adding target to table
>multipath[10770]: segfault at 000000000062d9b8 rip 00000000004043e7 rsp 0000007fbffff880 error 4
>device-mapper: dm-multipath: error getting device
>device-mapper: error adding target to table

Actions: View

Attachments on bug 252974: 161650