Attachment 161728 Details for Bug 253190 – serial console output

serial console output

rhel4-splat (text/plain), 18.21 KB, created by Peter Zijlstra on 2007-08-17 12:04:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Zijlstra

Created: 2007-08-17 12:04:27 UTC

Size: 18.21 KB

patch

obsolete

>  Booting 'Fedora (2.6.9-prep)'
>
>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz-2.6.9-prep ro root=LABEL=/ debug ignore_loglevel sysrq_always_e
>nabled console=ttyS0,115200 console=tty0
>   [Linux-bzImage, setup=0x1e00, size=0x1b93b2]
>initrd /initrd-2.6.9-prep.img
>   [Linux-initrd @ 0x37cf1000, 0x2febc8 bytes]
>
>Bootdata ok (command line is ro root=LABEL=/ debug ignore_loglevel sysrq_always_enabled console=ttyS0,115200 console=tty0)
>Linux version 2.6.9-prep (root@taijtu.programming.kicks-ass.net) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-7)) #2 Fri Aug 17 12:30:38 CEST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe8ac00 (usable)
> BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
> BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
> BIOS-e820: 000000007fe8ec00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000feb00
>ACPI: XSDT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd260
>ACPI: FADT (v003 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd358
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050309) @ 0x00000000fffcd7ea
>ACPI: MADT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd44c
>ACPI: BOOT (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd4be
>ACPI: ASF! (v016 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd4e6
>ACPI: MCFG (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd54d
>ACPI: HPET (v001 DELL    WS 380  0x00000007 ASL  0x00000061) @ 0x00000000000fd58b
>ACPI: SSDT (v001 DpgPmm  Cpu0Ist 0x00000011 INTL 0x20050309) @ 0x000000007fe8ac40
>ACPI: SSDT (v001 DpgPmm  Cpu1Ist 0x00000011 INTL 0x20050309) @ 0x000000007fe8b049
>ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000010 INTL 0x20050309) @ 0x000000007fe8b452
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050309) @ 0x0000000000000000
>On node 0 totalpages: 523914
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 519818 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 16
>WARNING: NR_CPUS limit of 1 reached. Processor ignored.
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ debug ignore_loglevel sysrq_always_enabled console=ttyS0,115200 console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 14.318180 MHz HPET timer.
>time.c: Detected 3192.147 MHz processor.
>time.c: Using HPET/TSC based timekeeping.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 2055108k/2095656k available (2449k kernel code, 39800k reserved, 1337k data, 180k init)
>Calibrating delay using timer specific routine.. 6388.84 BogoMIPS (lpj=3194420)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU:               Intel(R) Pentium(R) D CPU 3.20GHz stepping 07
>Using IO APIC NMI watchdog
>activating NMI Watchdog ... done.
>testing NMI watchdog ... OK.
>Using local APIC timer interrupts.
>Detected 12.469 MHz APIC timer.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs<7>Losing some ticks... checking if CPU frequency changed.
> 3 4 5 6 7 9 *10 11 12 15)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 193
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 209
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 201
>PCI-DMA: Disabling IOMMU.
>Simple Boot Flag at 0x7a set to 0x80
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1187354251.436:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ï¿½ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: PHILIPS DVD+/-RW DVD8801, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: PS/2 Generic Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices:
>VBTN PCI0 PCI4 PCI2 PCI3 PCI1 PCI5 PCI6 USB0 USB1 USB2 USB3
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 180k freed
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 185, io base 000000000000ff80
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 193
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 193, io base 000000000000ff60
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 201, io base 000000000000ff40
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 209
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: irq 209, io base 000000000000ff20
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 185
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 185, pci mem ffffff000000a800
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>hda: command error: status=0x51 { DriveReady SeekComplete Error }
>hda: command error: error=0x54
>ide: failed opcode was 100
>ATAPI device hda:
>  Error: Illegal request -- (Sense key=0x05)
>  Logical block address out of range -- (asc=0x21, ascq=0x00)
>  The failed "Read 10" packet command was:
>  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
>end_request: I/O error, dev hda, sector 0
>Buffer I/O error on device hda, logical block 0
>hda: command error: status=0x51 { DriveReady SeekComplete Error }
>hda: command error: error=0x54
>ide: failed opcode was 100
>ATAPI device hda:
>  Error: Illegal request -- (Sense key=0x05)
>  Logical block address out of range -- (asc=0x21, ascq=0x00)
>  The failed "Read 10" packet command was:
>  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
>end_request: I/O error, dev hda, sector 0
>Buffer I/O error on device hda, logical block 0
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217
>MSI INIT SUCCESS
>usb 5-3: new high speed USB device using address 2
>usb 5-6: new high speed USB device using address 3
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 4 ports detected
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
>ata1: SATA max UDMA/133 cmd 0xFFFFFF000000CD00 ctl 0x0 bmdma 0x0 irq 233
>ata2: SATA max UDMA/133 cmd 0xFFFFFF000000CD80 ctl 0x0 bmdma 0x0 irq 233
>ata3: SATA max UDMA/133 cmd 0xFFFFFF000000CE00 ctl 0x0 bmdma 0x0 irq 233
>ata4: SATA max UDMA/133 cmd 0xFFFFFF000000CE80 ctl 0x0 bmdma 0x0 irq 233
>scsi0 : ahci
>usb 5-8: new high speed USB device using address 5
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 5-6.1: new low speed USB device using address 6
>ata1.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.1
>usb 5-6.2: new low speed USB device using address 7
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.7-6.2
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>usb 4-1: new full speed USB device using address 2
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 8
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>  Vendor: ATA       Model: WDC WD800ADFD-75  Rev: 20.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: WDC WD800ADFD-75  Rev: 20.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
>hda: command error: status=0x51 { DriveReady SeekComplete Error }
>hda: command error: error=0x54
>ide: failed opcode was 100
>ATAPI device hda:
>  Error: Illegal request -- (Sense key=0x05)
>  Logical block address out of range -- (asc=0x21, ascq=0x00)
>  The failed "Read 10" packet command was:
>  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
>end_request: I/O error, dev hda, sector 0
>Buffer I/O error on device hda, logical block 0
>hda: command error: status=0x51 { DriveReady SeekComplete Error }
>hda: command error: error=0x54
>ide: failed opcode was 100
>ATAPI device hda:
>  Error: Illegal request -- (Sense key=0x05)
>  Logical block address out of range -- (asc=0x21, ascq=0x00)
>  The failed "Read 10" packet command was:
>  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
>end_request: I/O error, dev hda, sector 0
>Buffer I/O error on device hda, logical block 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>Unable to handle kernel NULL pointer dereference at 0000000000000350 RIP:
><ffffffffa01e6c5f>{:nfs:nfs_create+303}
>PML4 76c7b067 PGD 0
>Oops: 0000 [1]
>CPU 0
>Modules linked in: nfs(U) lockd(U) nfs_acl(U) rfcomm(U) l2cap(U) bluetooth(U) sunrpc(U) tg3(U) md5(U) ipv6(U) cpufreq_ondemand(U) dm_mirror(U) dm_mod(U) button(U) battery(U) ac(U) parport_pc(U) lp(U) parport(U) loop(U) ahci(U) libata(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U)
>Pid: 1281, comm: mount.nfs Not tainted 2.6.9-prep
>RIP: 0010:[<ffffffffa01e6c5f>] <ffffffffa01e6c5f>{:nfs:nfs_create+303}
>RSP: 0018:0000010076c23dd8  EFLAGS: 00010202
>RAX: 0000000000000000 RBX: 000001007fe01240 RCX: 0000000000000000
>RDX: 0000010076c23dd8 RSI: 00000100776d67f0 RDI: 000001007fe01240
>RBP: 0000000000000000 R08: 000001007fe01240 R09: 0000000000000000
>R10: ffffffff801ff6d8 R11: ffffffffa01e6b30 R12: 00000100776d67f0
>R13: 0000000076c23ef8 R14: 0000000000000000 R15: 0000007fbfffff0b
>FS:  0000002a95ac16f0(0000) GS:ffffffff80553a00(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000350 CR3: 0000000000101000 CR4: 00000000000006e0
>Process mount.nfs (pid: 1281, threadinfo 0000010076c22000, task 00000100778fe2b0)
>Stack: 00003ef800000001 00000100024f2000 0000000000000000 0000000000000246
>       000001007fe01240 0000000000000246 00000100024f2000 0000010076c23e58
>       0000000000000000 ffffffff8019b3c0
>Call Trace:<ffffffff8019b3c0>{vfs_getattr64+34} <ffffffff8019b5a4>{vfs_lstat64+44}
>       <ffffffff8019b8cc>{sys_newlstat+17} <ffffffff80110a8e>{system_call+126}
>
>
>Code: 48 8b 80 50 03 00 00 48 8b 40 18 ff 50 68 48 89 df 89 c5 e8
>RIP <ffffffffa01e6c5f>{:nfs:nfs_create+303} RSP <0000010076c23dd8>
>CR2: 0000000000000350
> <0>Kernel panic - not syncing: Oops
> <7>eth0: no IPv6 routers present
>  
>

Actions: View

Attachments on bug 253190: 161728 | 161729 | 161730