Attachment 161793 Details for Bug 250591 – output of dmesg from a boot of the latest F8 rawhide kernel.

output of dmesg from a boot of the latest F8 rawhide kernel.

dmesg-23-110.txt (text/plain), 36.17 KB, created by David Bentley on 2007-08-18 12:24:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Bentley

Created: 2007-08-18 12:24:06 UTC

Size: 36.17 KB

patch

obsolete

>Linux version 2.6.23-0.110.rc3.git1.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Wed Aug 15 18:19:20 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000df790000 (usable)
> BIOS-e820: 00000000df790000 - 00000000df79e000 (ACPI data)
> BIOS-e820: 00000000df79e000 - 00000000df7e0000 (ACPI NVS)
> BIOS-e820: 00000000df7e0000 - 00000000df800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
>Warning only 4GB will be used.
>Use a HIGHMEM64G enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 11200 pages used for memmap
>  HighMem zone: 808000 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FA390, 0014 (r0 ACPIAM)
>ACPI: RSDT DF790000, 0048 (r1 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ  6000701 MSFT       97)
>ACPI: FACP DF790200, 0084 (r2 MSTEST OEMFACP   6000701 MSFT       97)
>ACPI: DSDT DF7905C0, 7DEF (r1  A0655 A0655001        1 INTL 20060113)
>ACPI: FACS DF79E000, 0040
>ACPI: APIC DF790390, 006C (r1 MSTEST OEMAPIC   6000701 MSFT       97)
>ACPI: MCFG DF790400, 003C (r1 MSTEST OEMMCFG   6000701 MSFT       97)
>ACPI: SLIC DF790440, 0176 (r1 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ  6000701 MSFT       97)
>ACPI: OEMB DF79E040, 0080 (r1 MSTEST AMI_OEM   6000701 MSFT       97)
>ACPI: HPET DF7983B0, 0038 (r1 MSTEST OEMHPET   6000701 MSFT       97)
>ACPI: GSCI DF79E0C0, 2024 (r1 MSTEST GMCHSCI   6000701 MSFT       97)
>ACPI: SSDT DF7A00F0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT DF7A02D0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e0000000 (gap: df800000:1f600000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 1034240
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c080c000 soft=c07ec000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2394.163 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3590672k/4194304k available (2254k kernel code, 69516k reserved, 1160k data, 568k init, 2743872k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc075b000 - 0xc07e9000   ( 568 kB)
>      .data : 0xc0633896 - 0xc0755a44   (1160 kB)
>      .text : 0xc0400000 - 0xc0633896   (2254 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4791.96 BogoMIPS (lpj=2395982)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c080d000 soft=c07ed000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=2393996)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Total of 2 processors activated (9579.95 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3376 bytes
>khelper used greatest stack depth: 3084 bytes left
>Booting paravirtualized kernel on bare hardware
>Time: 12:01:47  Date: 07/18/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>khelper used greatest stack depth: 2980 bytes left
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  27, should be 1A [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>pnp: 00:08: ioport range 0x290-0x297 has been reserved
>pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
>pnp: 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
>pnp: 00:09: iomem range 0xfe9f9000-0xfe9f9fff has been reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0f: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:10: iomem range 0x100000-0xdf7fffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: fde00000-fdefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: e000-efff
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: feb00000-febfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3606k freed
>khelper used greatest stack depth: 2956 bytes left
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1187438506.659:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1D0684D9F3BBA386
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node c49bd440), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c49bd400), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node c49bd680), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c49bd640), AE_ALREADY_EXISTS
>ACPI: Marking method _PDC as Serialized
>ACPI Exception (processor_core-0791): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0791): AE_NOT_FOUND, Processor Device is not present [20070126]
>cpuidle: driver acpi_idle failed to attach to cpu 1
>cpuidle: driver acpi_idle failed to attach to cpu 0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2908 bytes left
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:597:26
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 861k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>insmod used greatest stack depth: 1884 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfe8fb800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfe8fb400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>insmod used greatest stack depth: 1876 bytes left
>SCSI subsystem initialized
>libata version 2.21 loaded.
>PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17
>ata2: PATA max UDMA/100 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17
>usb 6-2: new high speed USB device using ehci_hcd and address 2
>ata1.00: ATA-6: HDS722516VLAT80, V34OA6EA, max UDMA/100
>ata1.00: 321672960 sectors, multi 0: LBA48 
>ata1.01: ATA-7: HDS728040PLAT20, PF1OA21B, max UDMA/133
>usb 6-2: configuration #1 chosen from 1 choice
>ata1.01: 80418240 sectors, multi 0: LBA48 
>usb 1-2: USB disconnect, address 2
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HDS722516VLAT80  V34O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      HDS728040PLAT20  PF1O PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 80418240 512-byte hardware sectors (41174 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 80418240 512-byte hardware sectors (41174 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>sd 0:0:1:0: [sdb] Attached SCSI disk
>insmod used greatest stack depth: 956 bytes left
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 19
>ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata3.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/133
>ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.01: ATAPI: PIONEER DVD-RW  DVR-212, 1.21, max UDMA/66
>ata4.00: configured for UDMA/133
>ata4.01: configured for UDMA/66
>scsi 2:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc:
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:1:0: [sdd] Write Protect is off
>sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:1:0: [sdd] Write Protect is off
>sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:
>sd 2:0:1:0: [sdd] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 3:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
>sd 3:0:0:0: [sde] Write Protect is off
>sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB)
>sd 3:0:0:0: [sde] Write Protect is off
>sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde:
>sd 3:0:0:0: [sde] Attached SCSI disk
>scsi 3:0:1:0: CD-ROM            PIONEER  DVD-RW  DVR-212  1.21 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 19
>ata6: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 19
>ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>ata6.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata6.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdf] 625142448 512-byte hardware sectors (320073 MB)
>sd 4:0:0:0: [sdf] Write Protect is off
>sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdf] 625142448 512-byte hardware sectors (320073 MB)
>sd 4:0:0:0: [sdf] Write Protect is off
>sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf:
>sd 4:0:0:0: [sdf] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdg] 625142448 512-byte hardware sectors (320073 MB)
>sd 5:0:0:0: [sdg] Write Protect is off
>sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdg] 625142448 512-byte hardware sectors (320073 MB)
>sd 5:0:0:0: [sdg] Write Protect is off
>sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdg:
>sd 5:0:0:0: [sdg] Attached SCSI disk
>insmod used greatest stack depth: 828 bytes left
>ahci 0000:02:00.0: version 2.3
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 cmd 0xf8878100 ctl 0x00000000 bmdma 0x00000000 irq 16
>ata8: SATA max UDMA/133 cmd 0xf8878180 ctl 0x00000000 bmdma 0x00000000 irq 16
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     USB2.0   CF  CardReader   9144 PQ: 0 ANSI: 0
>scsi 8:0:0:1: Direct-Access     USB2.0   CBO CardReader   9144 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdh] Attached SCSI removable disk
>sd 8:0:0:1: [sdi] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1187438528.564:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  5 users, 11 roles, 2259 types, 104 bools, 1 sens, 1024 cats
>security:  61 classes, 224078 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1187438529.067:3): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:1:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:1:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>sr 3:0:1:0: Attached scsi generic sg5 type 5
>sd 4:0:0:0: Attached scsi generic sg6 type 0
>sd 5:0:0:0: Attached scsi generic sg7 type 0
>sd 8:0:0:0: Attached scsi generic sg8 type 0
>sd 8:0:0:1: Attached scsi generic sg9 type 0
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:92:19:92:e5
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 20 (level, low) -> IRQ 21
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>firewire_ohci: Added fw-ohci device 0000:04:01.0, OHCI version 1.10
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>audit(1187438535.841:4): avc:  denied  { read } for  pid=1540 comm="sh" name="urandom" dev=tmpfs ino=2685 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:urandom_device_t:s0 tclass=chr_file
>audit(1187438535.891:5): avc:  denied  { read } for  pid=1546 comm="sh" name="urandom" dev=tmpfs ino=2685 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:urandom_device_t:s0 tclass=chr_file
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>audit(1187438537.524:6): avc:  denied  { read } for  pid=1572 comm="sh" name="urandom" dev=tmpfs ino=2685 scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:urandom_device_t:s0 tclass=chr_file
>audit(1187438541.409:7): avc:  denied  { read } for  pid=1578 comm="sh" name="urandom" dev=tmpfs ino=2685 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:urandom_device_t:s0 tclass=chr_file
>No dock devices found.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1187438544.602:8): avc:  denied  { read write } for  pid=1763 comm="microcode_ctl" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:cpucontrol_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438544.602:9): avc:  denied  { read write } for  pid=1763 comm="microcode_ctl" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:cpucontrol_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438544.602:10): avc:  denied  { read write } for  pid=1763 comm="microcode_ctl" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:cpucontrol_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438545.244:11): avc:  denied  { read write } for  pid=1788 comm="kudzu" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:kudzu_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438545.244:12): avc:  denied  { read write } for  pid=1788 comm="kudzu" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:kudzu_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438545.244:13): avc:  denied  { read write } for  pid=1788 comm="kudzu" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:kudzu_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438546.433:14): avc:  denied  { read write } for  pid=1823 comm="ip6tables-resto" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438546.433:15): avc:  denied  { read write } for  pid=1823 comm="ip6tables-resto" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438546.433:16): avc:  denied  { read write } for  pid=1823 comm="ip6tables-resto" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>audit(1187438547.367:17): avc:  denied  { read write } for  pid=1874 comm="iptables-restor" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438547.367:18): avc:  denied  { read write } for  pid=1874 comm="iptables-restor" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438547.367:19): avc:  denied  { read write } for  pid=1874 comm="iptables-restor" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1187438548.315:20): avc:  denied  { read write } for  pid=1966 comm="arping" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:netutils_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438548.315:21): avc:  denied  { read write } for  pid=1966 comm="arping" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:netutils_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1187438548.315:22): avc:  denied  { read write } for  pid=1966 comm="arping" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:netutils_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>audit(1187438549.416:23): audit_pid=2217 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining

Actions: View

Attachments on bug 250591: 160513 | 160700 | 160768 | 160769 | 161068 | 161793