Attachment 168591 Details for Bug 250486 – Contents of /var/log/dmesg after booting without a disk inserted

Contents of /var/log/dmesg after booting without a disk inserted

var.log.dmesg.without_disk (text/plain), 27.66 KB, created by Mercury Morris on 2007-08-23 12:55:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mercury Morris

Created: 2007-08-23 12:55:13 UTC

Size: 27.66 KB

patch

obsolete

>Linux version 2.6.21.3 (root@estreet.byron.home) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #2 SMP Thu Jul 26 07:02:55 CDT 2007
>Command line: ro root=/dev/sda3 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
> BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F6740, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FFF0100, 004C (r1 A M I  OEMXSDT   1000428 MSFT       97)
>ACPI: FACP 7FFF0281, 00F4 (r1 A M I  OEMFACP   1000428 MSFT       97)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
>ACPI: DSDT 7FFF0440, 35A4 (r1  0ABCF 0ABCF007        7 INTL  2002026)
>ACPI: FACS 7FFFF000, 0040
>ACPI: APIC 7FFF0380, 006A (r1 A M I  OEMAPIC   1000428 MSFT       97)
>ACPI: OEMB 7FFFF040, 005E (r1 A M I  OEMBIOS   1000428 MSFT       97)
>ACPI: SRAT 7FFF39F0, 00F0 (r1 A M I  OEMSRAT   1000428 MSFT       97)
>ACPI: ASF! 7FFF3AE0, 0086 (r1 AMIASF AMDSTRET        1 INTL  2002026)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 1 -> APIC 1 -> Node 1
>SRAT: Node 0 PXM 0 100000-40000000
>Entering add_active_range(0, 256, 262144) 0 entries of 3200 used
>SRAT: Node 1 PXM 1 40000000-80000000
>Entering add_active_range(1, 262144, 524272) 1 entries of 3200 used
>SRAT: Node 0 PXM 0 0-40000000
>Entering add_active_range(0, 0, 159) 2 entries of 3200 used
>Entering add_active_range(0, 256, 262144) 3 entries of 3200 used
>NUMA: Using 30 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000040000000
>Bootmem setup node 1 0000000040000000-000000007fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   262144
>    1:   262144 ->   524272
>On node 0 totalpages: 262047
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1347 pages reserved
>  DMA zone: 2596 pages, LIFO batch:0
>  DMA32 zone: 3528 pages used for memmap
>  DMA32 zone: 254520 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>On node 1 totalpages: 262128
>  DMA zone: 0 pages used for memmap
>  DMA32 zone: 3583 pages used for memmap
>  DMA32 zone: 258545 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x5008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfc9fe000, GSI 24-27
>ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28])
>IOAPIC[2]: apic_id 4, address 0xfc9ff000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f7c0000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42880 bytes of per cpu data
>Built 2 zonelists.  Total pages: 515661
>Kernel command line: ro root=/dev/sda3 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1597.088 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ f0000000 size 128 MB
>CPU 1: aperture @ f0000000 size 128 MB
>Memory: 2056204k/2097088k available (2648k kernel code, 40496k reserved, 1299k data, 320k init)
>Calibrating delay using timer specific routine.. 3196.18 BogoMIPS (lpj=1598090)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12477261
>Detected 12.477 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3193.74 BogoMIPS (lpj=1596870)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 1
>AMD Opteron(tm) Processor 242 stepping 01
>Brought up 2 CPUs
>migration_cost=706
>PM: Adding info for No Bus:platform
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:PNP0F03:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:PNP0501:01
>PM: Adding info for acpi:PNP0700:00
>PM: Adding info for acpi:PNP0400:00
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:PNP0103:00
>PM: Adding info for acpi:PNP0C02:02
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:PNP0A03:01
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
>PM: Adding info for pci:0000:00:06.0
>PM: Adding info for pci:0000:00:07.0
>PM: Adding info for pci:0000:00:07.1
>PM: Adding info for pci:0000:00:07.2
>PM: Adding info for pci:0000:00:07.3
>PM: Adding info for pci:0000:00:0a.0
>PM: Adding info for pci:0000:00:0a.1
>PM: Adding info for pci:0000:00:0b.0
>PM: Adding info for pci:0000:00:0b.1
>PM: Adding info for pci:0000:00:18.0
>PM: Adding info for pci:0000:00:18.1
>PM: Adding info for pci:0000:00:18.2
>PM: Adding info for pci:0000:00:18.3
>PM: Adding info for pci:0000:00:19.0
>PM: Adding info for pci:0000:00:19.1
>PM: Adding info for pci:0000:00:19.2
>PM: Adding info for pci:0000:00:19.3
>PM: Adding info for pci:0000:03:00.0
>PM: Adding info for pci:0000:03:00.1
>PM: Adding info for pci:0000:03:0a.0
>PM: Adding info for pci:0000:03:0a.1
>PM: Adding info for pci:0000:03:0c.0
>PM: Adding info for pci:0000:02:09.0
>PM: Adding info for pci:0000:01:06.0
>ACPI: PCI Root Bridge [PCIB] (0000:04)
>PCI: Probing PCI hardware (bus 04)
>PM: Adding info for No Bus:pci0000:04
>Boot video device is 0000:05:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.PBP2._PRT]
>PM: Adding info for pci:0000:04:00.0
>PM: Adding info for pci:0000:04:01.0
>PM: Adding info for pci:0000:05:00.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>PM: Adding info for pnp:00:0d
>PM: Adding info for pnp:00:0e
>PM: Adding info for pnp:00:0f
>PM: Adding info for pnp:00:10
>pnp: PnP ACPI: found 17 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:04:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AMD 8151 AGP Bridge rev B2
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 128M @ 0xf0000000
>pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0b: ioport range 0x295-0x296 has been reserved
>pnp: 00:0b: ioport range 0x778-0x77f has been reserved
>pnp: 00:0b: ioport range 0xb78-0xb7f has been reserved
>pnp: 00:0b: ioport range 0xf78-0xf7f has been reserved
>pnp: 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0e: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0f: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:kmem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PCI: Bridge: 0000:00:06.0
>  IO window: 9000-9fff
>  MEM window: fc800000-fc8fffff
>  PREFETCH window: db200000-db2fffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: fc700000-fc7fffff
>  PREFETCH window: db100000-db1fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 8000-8fff
>  MEM window: fb600000-fc6fffff
>  PREFETCH window: db000000-db0fffff
>PCI: Bridge: 0000:04:01.0
>  IO window: disabled.
>  MEM window: fca00000-feafffff
>  PREFETCH window: db400000-eb4fffff
>NET: Registered protocol family 2
>Time: acpi_pm clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3076k freed
>PM: Adding info for No Bus:mcelog
>PM: Adding info for No Bus:msr0
>PM: Adding info for No Bus:msr1
>PM: Adding info for No Bus:cpu0
>PM: Adding info for No Bus:cpu1
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1187873030.689:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0a.0 subordinate bus.
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0b.0 subordinate bus.
>Chipset erratum: Disabling direct PCI/AGP transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>hpet_acpi_add: no address or irqs in _CRS
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Removing info for No Bus:ttyS1
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PM: Adding info for No Bus:ttyS1
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Power state transitions not supported
>powernow-k8: Power state transitions not supported
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 320k freed
>Write protecting the kernel read-only data: 982k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:03:00.0: irq 19, io mem 0xfc8fd000
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:03:00.1: irq 19, io mem 0xfc8fe000
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>SCSI subsystem initialized
>3ware Storage Controller device driver for Linux v1.26.02.002.
>ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 29 (level, low) -> IRQ 29
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>scsi0 : 3ware Storage Controller
>PM: Adding info for No Bus:host0
>3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x8c00, IRQ: 29.
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target0:0:1
>scsi 0:0:1:0: Direct-Access     3ware    Logical Disk 1   1.2  PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target0:0:2
>scsi 0:0:2:0: Direct-Access     3ware    Logical Disk 2   1.2  PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target0:0:3
>scsi 0:0:3:0: Direct-Access     3ware    Logical Disk 3   1.2  PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target0:0:4
>PM: Removing info for No Bus:target0:0:4
>PM: Adding info for No Bus:target0:0:5
>PM: Removing info for No Bus:target0:0:5
>PM: Adding info for No Bus:target0:0:6
>PM: Removing info for No Bus:target0:0:6
>PM: Adding info for No Bus:target0:0:7
>PM: Removing info for No Bus:target0:0:7
>PM: Adding info for No Bus:target0:0:8
>PM: Removing info for No Bus:target0:0:8
>PM: Adding info for No Bus:target0:0:9
>PM: Removing info for No Bus:target0:0:9
>PM: Adding info for No Bus:target0:0:10
>PM: Removing info for No Bus:target0:0:10
>PM: Adding info for No Bus:target0:0:11
>PM: Removing info for No Bus:target0:0:11
>PM: Adding info for No Bus:target0:0:12
>PM: Removing info for No Bus:target0:0:12
>PM: Adding info for No Bus:target0:0:13
>PM: Removing info for No Bus:target0:0:13
>PM: Adding info for No Bus:target0:0:14
>PM: Removing info for No Bus:target0:0:14
>PM: Adding info for No Bus:target0:0:15
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>PM: Removing info for No Bus:target0:0:15
>PM: Adding info for scsi:0:0:0:0
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>SCSI device sda: write cache: enabled, read cache: disabled, supports DPO and FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>SCSI device sda: write cache: enabled, read cache: disabled, supports DPO and FUA
> sda: sda1 sda2 sda3 sda4 <<7>libata version 2.20 loaded.
>pata_amd 0000:00:07.1: version 0.2.8
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>scsi1 : pata_amd
>PM: Adding info for No Bus:host1
> sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for scsi:0:0:1:0
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>SCSI device sdb: write cache: enabled, read cache: disabled, supports DPO and FUA
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>SCSI device sdb: write cache: enabled, read cache: disabled, supports DPO and FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 >
>sd 0:0:1:0: Attached scsi disk sdb
>PM: Adding info for scsi:0:0:2:0
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>SCSI device sdc: write cache: enabled, read cache: disabled, supports DPO and FUA
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>SCSI device sdc: write cache: enabled, read cache: disabled, supports DPO and FUA
> sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
>sd 0:0:2:0: Attached scsi disk sdc
>PM: Adding info for scsi:0:0:3:0
>SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>SCSI device sdd: write cache: enabled, read cache: disabled, supports DPO and FUA
>SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>SCSI device sdd: write cache: enabled, read cache: disabled, supports DPO and FUA
> sdd: sdd1 sdd2 <<4>ATA: abnormal status 0x7F on port 0x00000000000101f7
>ATA: abnormal status 0x7F on port 0x00000000000101f7
> sdd5 sdd6 >
>sd 0:0:3:0: Attached scsi disk sdd
>ata1.00: ATAPI, max UDMA/33, CDB intr
>ata1.00: configured for UDMA/33
>scsi2 : pata_amd
>PM: Adding info for No Bus:host2
>ata2.00: ATAPI, max UDMA/66
>ata2.00: configured for UDMA/66
>PM: Adding info for No Bus:target1:0:0
>scsi scan: INQUIRY result too short (5), using 36
>scsi 1:0:0:0: Direct-Access                                    PQ: 0 ANSI: 5
>PM: Adding info for scsi:1:0:0:0
>sd 1:0:0:0: Attached scsi disk sde
>PM: Adding info for No Bus:target2:0:0
>scsi 2:0:0:0: CD-ROM            SONY     DVD RW DRU-710A  BY01 PQ: 0 ANSI: 5
>PM: Adding info for scsi:2:0:0:0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1187873042.264:2): selinux=0 auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:0:2:0: Attached scsi generic sg2 type 0
>sd 0:0:3:0: Attached scsi generic sg3 type 0
>sd 1:0:0:0: Attached scsi generic sg4 type 0
>scsi 2:0:0:0: Attached scsi generic sg5 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>AMD768 RNG detected
>PM: Adding info for No Bus:hw_random
>PM: Adding info for No Bus:i2c-0
>PM: Adding info for No Bus:i2c-1
>input: PC Speaker as /class/input/input3
>tg3.c:v3.75.1 (May 7, 2007)
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24
>PM: Adding info for No Bus:eth0
>eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:29:f3:4a
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
>gameport: EMU10K1 is pci0000:03:0a.1/gameport0, io 0x9c00, speed 707kHz
>PM: Adding info for gameport:gameport0
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>PM: Adding info for No Bus:timer
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.11  Wed Jun 13 16:33:22 PDT 2007
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Adding info for No Bus:hwC0D0
>PM: Adding info for No Bus:midiC0D0
>PM: Adding info for No Bus:midi
>PM: Adding info for No Bus:dmmidi
>PM: Adding info for No Bus:pcmC0D3p
>PM: Adding info for ac97:0-0:EM28028
>PM: Adding info for No Bus:pcmC0D2p
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1c
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>PM: Adding info for No Bus:hwC0D2
>PM: Adding info for No Bus:midiC0D1
>PM: Adding info for No Bus:amidi
>PM: Adding info for No Bus:admmidi
>PM: Adding info for No Bus:midiC0D2
>FDC 0 is a post-1991 82077
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdd1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>XFS mounting filesystem sdd6
>Ending clean XFS mount for filesystem: sdd6
>Adding 2048248k swap on /dev/sda5.  Priority:1 extents:1 across:2048248k
>Adding 1959888k swap on /dev/sdb8.  Priority:1 extents:1 across:1959888k
>Adding 2104472k swap on /dev/sdc10.  Priority:1 extents:1 across:2104472k
>Adding 1959888k swap on /dev/sdd5.  Priority:1 extents:1 across:1959888k

Actions: View

Attachments on bug 250486: 160465 | 160466 | 168590 | 168591